Traxxas

LED light harness, rear (requires #5838, 6737X, 6777X, or 6836X rear bumper)Replacement rear LED lights for LED light kits.Replacement part for these models:Rustler® 4X4Slash 4X4SlashStampede®...

Bumper, rear/ bumper mount (fits 2WD Slash®) (for LED light kit installation)Replacement rear bumper and mount for 5894 2WD Slash LED light kit.Replacement part for these models:SlashAccessory part...

Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screwTraxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

Gear, 11-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screwTraxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

.

TRX 2.5R Racing Engine Multi-Shaft w/ Recoil Starter

Ball bearing, black rubber sealed (15x26x5mm) (2)Replacement part for these models:X-Maxx®

Ball bearings, black rubber sealed (12x21x5mm) (2)Replacement part for these models:Maxx®

Grease, premium high performance (20cc)Replacement part for these models:E-Revo® VXL BrushlessMaxx®TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with...

LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Rustler® or Bandit®)Traxxas LED light kits are built tough, with factory...

Sledgehammer extreme-terrain tires provide maximum traction and control on variety of off-road surfaces. The Sledgehammer's tall sidewall and tough 2.8” wheels provide additional ground clearance,...

LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for...

Body, Bigfoot® No. 1, blue-x, Officially Licensed replica (painted, decals applied)Traxxas replacement BIGFOOT® bodies come fully painted with pre-installed body accessories. They’re ready to mount...

Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Heavy-Duty Suspension ArmsHeavy-duty suspension arms (#3631G) green Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas...

Main chassis (gray) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)The gray chassis features a 164 mm long battery compartment...

Main chassis (gray) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)The gray chassis features a 164 mm long battery compartment...

Suspension arms , rear (left & right), heavy duty (2) BlueHeavy-duty rear suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite with just the...

Suspension arms , rear (left & right), heavy duty (2) OrangeHeavy-duty rear suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite with just the...

Suspension arms , rear (left & right), heavy duty (2) RedHeavy-duty rear suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite with just the right...

Suspension arms , rear (left & right), heavy duty (2) GreenHeavy-duty rear suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite with just the...

Screws, 3x24mm roundhead self-tapping (with shoulder) (6)

Spacers, nylon (3x6x1.5mm) (12)

Screws, 4x20mm roundhead machine (6)

Screws, 3x25mm roundhead machine (6)Replacement part for these models:Nitro Slash

Screws, 4x12mm roundhead machine (6)Replacement part for these models:Nitro Slash

Screws, 3x18mm roundhead machine (6)Replacement part for these models:Nitro Slash

Screws, 3x12mm roundhead machine (6)Replacement part for these models:Nitro Slash

Heavy-Duty Rear Suspension Arms BlackHeavy-duty suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Heavy-Duty Rear Suspension Arms OrangeHeavy-duty suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Heavy-Duty Rear Suspension Arms RedHeavy-duty suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with...

Heavy-Duty Rear Suspension Arms GreenHeavy-duty suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Screws, 3x45mm button-head machine (hex drive) (6)Replacement part for these models:Unlimited Desert Racer®

Screws, 3x4mm button-head machine (hex drive) (6)Replacement part for these models:Unlimited Desert Racer®

Wheelie bar mount/ 3x40 BCS (1)/ 3x30 BCS (1)/ 3x12 BCS (1) (for LED light kit installation)Replacement wheelie bar mount for Stampede®, Rustler®, and Bandit® LED light kits.Replacement part for...

Gear, 35-T pinion (48-pitch) (fits 3mm shaft)/ set screwTraxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed...

Gear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screwTraxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed...

2361 Blue Silicone O-rings (12)

Y-harness, BEC to LED light setReplacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler® 4X4Rustler®Slash 4X4SlashStampede® 4X4Stampede®Accessory part for these...

BEC & SWITCH COVER

Tires and wheels, assembled, glued (3.8" black wheels, Sledgehammer® tires, foam inserts) (2)Replacement part for these models:Sledge™

Mounts, sway bar/ collars (front and rear)Accessory part for these models:Sledge

Differential, center (complete) (fits Sledge™)Replacement part for these models:Sledge™

Differential output cup, front or rear (hardened steel)/ 2.5x12mm pinReplacement part for these models:Sledge

Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)Replacement part for these models:Sledge

Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)Replacement part for these models:Sledge

Driveshaft, center, rear (shaft only, 4mm x 146.5mm) (1)Replacement part for these models:Sledge™

Driveshaft, center, front (shaft only, 4mm x 88mm) (1)Replacement part for these models:Sledge

Stub axle, frontReplacement part for these models:Sledge™

Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (2)Replacement part for these models:Sledge™

Shock tower, rear, 6061-T6 aluminum (orange-anodized)Accessory part for these models:Sledge™

Shock tower, rear, 6061-T6 aluminum (red-anodized)Accessory part for these models:Sledge™

Shock tower, rear, 6061-T6 aluminum (green-anodized)Accessory part for these models:Sledge

Body support, center/ 3x16 CS (8)Replacement part for these models:Sledge™

The Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss® 4X4, Rustler® 4X4, or Slash® 4X4 into the ultimate bashing machine. Engineered for extreme brushless power systems, the kit...

Toe links, 202.5mm (187.5mm center to center) (black) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)Accessory part for these models:X-Maxx®

WideMaxx® Suspension KitA Tougher, Wider StanceThe Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on...

Screws, 3x45mm cap-head machine (hex drive) (6)Replacement part for these models:Sledge™

9670 Sledgehammer Tires (2) w/ Foam Inserts (2) 

Body, GT-Maxx® shock (aluminum, blue-anodized) (long) (1)Accessory part for these models:Sledge™

Body, GT-Maxx® shock (aluminum, orange-anodized) (long) (1)Accessory part for these models:Sledge

Body, GT-Maxx® shock (aluminum, green-anodized) (long) (1)Accessory part for these models:Sledge™

Aluminum GT-Maxx Shock Caps (4) / spacers (4)Accessory part for these models:Sledge

Aluminum GT-Maxx Shock Caps (4) / spacers (4)Accessory part for these models:Sledge

Aluminum GT-Maxx Shock Caps (4) / spacers (4)Accessory part for these models:Sledge

Shock shaft, 80mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)Accessory part for these models:Sledge

Shocks, GT-Maxx®, aluminum (blue-anodized) (fully assembled w/o springs) (2)Replacement part for these models:Sledge

Springs, shock (natural finish) (GT-Maxx®) (1.487 rate) (85mm) (2)Replacement part for these models:Sledge

Springs, shock (natural finish) (GT-Maxx®) (1.569 rate) (85mm) (2)Accessory part for these models:Sledge

Rear (left and right) Suspension arm covers 2.5x8 CCS (12)Replacement part for these models:Sledge™

Rear (left and right) Suspension arm covers 2.5x8 CCS (12)Replacement part for these models:Sledge™

Front (left and right) Suspension arm covers  2.5x8 CCS (12)Replacement part for these models:Sledge™

Front (left and right) Suspension arm covers  2.5x8 CCS (12)Replacement part for these models:Sledge™

Front (left and right) Suspension arm covers  2.5x8 CCS (12)Replacement part for these models:Sledge™

Front (left and right) Suspension arm covers  2.5x8 CCS (12)Replacement part for these models:Sledge™

Tray, batteryReplacement part for these models:Sledge™

Linkage, sway bar (front or rear)Accessory part for these models:Sledge™

Sway bar set (includes 1 each of all 6 sway bars)Accessory part for these models:Sledge™

Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardwareReplacement part for these models:Sledge™

Differential output cup, center (hardened steel)/ 2.5x12mm pinReplacement part for these models:Sledge™

Mount, center differentialReplacement part for these models:Sledge™

Ring gear, differential/ pinion gear, differential (machined) (front or rear)Accessory part for these models:Sledge™

Boots, driveshaft (2)/ retainer (assembled) (2)Replacement part for these models:Sledge™

Stub axle, rear (for use only with #9557 rear driveshaft)Replacement part for these models:Sledge™

Carriers, stub axle (left and right)Replacement part for these models:Sledge™

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)Replacement part for these models:Sledge

Camber links, rear (144mm) (2) (assembled with hollow balls)Replacement part for these models:Sledge™

Draglink, steering/ 3x14mm SS (2)Replacement part for these models:Sledge™

Servo saver/ servo saver spring/ servo horn, steering (assembled)Replacement part for these models:Sledge™

Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)Replacement part for these models:Sledge™

Shock tower, front, 6061-T6 aluminum Replacement part for these models:Sledge

Shock tower, front, 6061-T6 aluminum Replacement part for these models:Sledge

Shock tower, front, 6061-T6 aluminum Replacement part for these models:Sledge

Shock tower, rear, 6061-T6 aluminum (blue-anodized)Replacement part for these models:Sledge™

Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3x25 CS (2)Replacement part for these models:Sledge™

Bumper, front/ skidplate, front/ tie bar mount, front/ 3x25 CS (2)Replacement part for these models:Sledge™

Suspension arm, rear (left)Replacement part for these models:Sledge

Suspension arm, rear (left)Replacement part for these models:Sledge