Traxxas

FEATURES: Steel construction Top Shoulder design (not threaded) Used for attaching the Throttle Bellcrank to Revo chassis INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length:...

FEATURES: Black finish Steel construction Cap head design INCLUDES: (6) 3X32mm cap head machine screws SPECS: Length: 1.260" (32mm) Diameter: .119" ( 3mm) MM Pitch: .5 coarse

Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6780 center differential)Accessory part for these models:Rally VXLRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash...

Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

FEATURES: Aluminum Construction Blue in Color INCLUDES: Six Button Head Aluminum 4mm x 4mm Screws REQUIRES: Assembly onto Vehicle

FEATURES: Steel construction Black in color Button head design INCLUDES: (6) 4X6mm button head screws SPECS: Length: 1/4" (6mm) Diameter: 3/16" (4mm)

FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 16mm (.63") Threaded...

Fits Continued: 1/10 Revo FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length:...

FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 16mm (.63") Threaded...

  FEATURES: Gray nylon construction INCLUDES: One nylon transmission skid plate REQUIRES: Installation on the E-Maxx SPECS: Length: 4.60" (117mm) Width: 2.40" (61mm)

FEATURES: Replaces damaged receiver boxes Constructed of black plastic INCLUDES: One top and bottom half receiver box for the Traxxas E-Maxx Hardware REQUIRES: Installing receiver and bolting...

FEATURES: Steel construction _ Roll pin pre-installed INCLUDES: One slipper clutch set SPECS: Length: 1.98" (50mm) Diameter: .21" ( 5mm) COMMENTS: This part will fit both the standard and XL version...

FEATURES: Made from black molded nylon For the Traxxas Rustler/Stampede INCLUDES: Dust cover for the Traxxa Rustler 3 x 6 mm round head coarse thread screws (to mount dust cover) Rubber Plug Specs:...

Gear adapter, fixed Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models including Slash, Bandit, Rustler,...

  Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic...

PACKAGE INCLUDES: Twelve 5x8mm bushings.  

 Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face and a natural nylon...

FEATURES: Black chrome plated plastic, five spoke design Split X-Pattern tread tires with foam inserts INCLUDES: One left and one right all-star wheel with Anaconda tires and foam inserts for...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic...

FEATURES: 2.8" All Star black chrome wheels Ribbed pattern INCLUDES: Two 2.8" mounted nitro rear/electric front tires, All Star chrome wheels and foam inserts REQUIRES: Installation on vehicle SPECS:...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias Ribbed tires for no-hassle, out-of-the-box...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias tires for no-hassle, out-of-the-box bolt-on...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias tires for no-hassle, out-of-the-box bolt-on...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Made of a black plastic/nylon material. Used to help pre-load the shock springs...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Constructed of molded plastic. Contains enough parts for two shocks. Fits the shocks on most...

Boost durability as you dress up your Traxxas model with anodized style! These new aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra...

Fits all Traxxas vehicles with Ultra Shocks: Slash, Bandit, Nitro Sport, Stampede (nitro and electric), Rustler (nitro and electric), T-Maxx, and E-Maxx

Boost durability as you dress up your Traxxas model with anodized style! These aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra Shocks—Slash, Bandit, Nitro...

Boost durability as you dress up your Traxxas model with anodized style! These new aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap...

FEATURES: Molded Composite Gray in Color INCLUDES: Two ultra shock bodies (long) REQUIRES: Installation SPECS: Length: 1.45" (37mm) Diameter: .51" (13mm)

  FEATURES: Gray composite bodies Stock replacement T-Maxx 3.3 unassembled shocks Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of...

  FEATURES: Replaces damaged or worn shocks. Molded black plastic bodies. Change the dampening rate (firmness) of each shock with different widths of pre-load spacers. INCLUDES: Two Traxxas...

FEATURES: Gray composite bodies Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are...

  PACKAGE INCLUDES: Two UNASSEMBLED long front shocks with pre-load spacers Two medium springs One 1/2 ounce bottle shock oil  COMMENTS: Instructions are not included for assembling...

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 59mm (78mm center to center) turnbuckles REQUIRES: Installation on the vehicle

Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler, Bandit, and the Slash, the ball bearing...

Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler, Bandit, and the Slash, the ball bearing...

FEATURES: White Plastic Construction INCLUDES: One Bellcrank One Link One Arm

FEATURES: Metal construction. Chrome draglink shoulder screws with a phillips drive. Black steering bellcrank shoulder screws with a hexagon socket drive. Coarse thread. INCLUDES: (2) Bellcrank...

PACKAGE INCLUDES: Two 3mm x 46mm screw pins Two 3mm x 40mm screw pins Two 3mm x 29mm screw pins Two 2mm x 27mm screw pins Two 2mm x 24mm screw pins

FEATURES: Anodized aluminum construction, blue in color Black nylon ball ends INCLUDES: One 39mm blue aluminum turnbuckle set with instructions REQUIRES: Installation onto vehicle

FEATURES: Plastic construction Black in color These steering blocks mount the the front uprights, and support the front axles INCLUDES: One left and right steering blocks REQUIRES: 5x11x4mm bearings

FEATURES: Steel construction INCLUDES: One steel 30T idler gear REQUIRES: Installation on vehicle

.

FEATURES: Gray plastic construction Steel idler shaft INCLUDES: One gearbox One idler shaft COMMENTS: This part fit the standard and XL version of both the Stampede and Rustler.

Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts...

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

.

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

The Traxxas 2.8" Talon tires are the most versatile all-terrain tires available for your Traxxas model. The directional long-wear tread pattern provides extended tire life, while providing...

FEATURES: Fits the REAR of the nitro Stampede and Rustler and the FRONT of the electric Stampede and Rustler 2.8" All Star black chrome wheels Talon tires with foam inserts INCLUDES: Two 2.8" mounted...

FEATURES: Fits the Rear of the nitro Stampede or Rustler or the Front of the electric Stampede or Rustler 2.8" All Star chrome wheels Talon Tires For the Front of the Stampede INCLUDES: Two 2.8"...

 Talon assembled and glued 2.8" tire sets make it easy to maintain peak performance. Talon tires are proven to provide "just-right" grip and handling on a wide variety of surfaces. Soft rubber...

 Talon assembled and glued 2.8" tire sets make it easy to maintain peak performance. Talon tires are proven to provide "just-right" grip and handling on a wide variety of surfaces. Soft rubber...

Includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware) (grill sold separately.

Body, Bigfoot® No. 1, Officially Licensed replica (painted, decals applied)Replacement part for these models:Bigfoot® No. 1 Officially Licensed Replica

.

Body, Bigfoot®, Officially Licensed replica (clear, requires painting)/ window masks/ decal sheetAccessory part for these models:Bigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed...

.

FEATURES: Gray plastic construction INCLUDES: Two wheel hubs Two 2.5mmX12mm axle pins SPECS: Hex size: 12mm Width: .32" (8mm)

Body, Bigfoot® Flame, Officially Licensed replica (painted, decals applied)Replacement part for these models:Bigfoot® No. 1 Officially Licensed Replica

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

FEATURES: Made of a black plastic/nylon material. Also called the rear hub or hub carrier. Has 2 possible mount locations for the outer hinge pin shaft. INCLUDES. 2 Stub alxe carriers. COMMENTS: This...

Body, Stampede, Hawaiian graphics (painted, decals applied) Accessory part for these models: Stampede

.

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 61mm (96mm center to center) turnbuckles REQUIRES: Installation on the vehicle

Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)Accessory part for these models:Bigfoot® No...

Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)Accessory part for these models:Bigfoot® No...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two front 39mm (69mm center to center) turnbuckles and instruction sheet REQUIRES: Installation on the...

#2579 3x15 BCS (4) (required for installation)(sold separately)Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)TUBES...

#2579 3x15 BCS (4) (required for installation)(sold separately)Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)TUBES...

#2579 3x15 BCS (4) (required for installation)(sold separately)Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)TUBES...

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler / T-Maxx Classic FEATURES: Black steel construction Screws are half-threaded/half-smooth Phillips head INCLUDES: Six...

FEATURES: Grey Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS: Short Length: 77 mm (3.03") Width: 9 mm (0.354") Height: 4 mm (0.157") Long Length: 90 mm (3.54") Width: 9 mm...

FEATURES: Black Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS: Short Length: 77 mm (3.03") Width: 9 mm (0.354") Height: 4 mm (0.157") Long Length: 90 mm (3.54") Width: 9...

FEATURES: Durable steel construction INCLUDES: Two 48mm pins Two 34mm pins Two 30mm pins Two 28mm pins Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

FEATURES: Made from black molded nylon For the Traxxas Stampede SPECS: Height: 2 3/4" Thickness: 1/4" Width at base: 2 3/4" Width at top: 2"

FEATURES: Steel construction Natural color INCLUDES: Two front axles REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 32mm (1.26") Diameter: 5mm

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball...

.

FEATURES: T-6061 aluminum construction, green in color INCLUDES: One Left and Right Alloy Steering Block Four 5x11mm Ball Bearings

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball...

PACKAGE INCLUDES: Two steering blocks (one left and one right)

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

.

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

FEATURES: Black Plastic Construction INCLUDES: Two Blocks  

FEATURES: Properly seals receiver box to minimize dirt and moisture exposure INCLUDES: Silicone grease One Gasket Two Foam Strips Instructions REQUIRES: Application to receiver box

FEATURES: Nylon construction Black in color INCLUDES: One Receiver Box One Rubber Seal Foam Padding Two 2.5x8mm Cap Head Screws Two 3x10mm Cap Head Screws Two 2.5x10mm Cap Head Screws One Tube of...