Traxxas

.

.

.

.

.

.

.

.Low speed spray bar screws, 2x4mm roundhead machine screws (6)

FEATURES: Black steel construction Hexagon socket drive insert High round cap head screws INCLUDES: (6) Screws SPECS: Length: 23mm Diameter: 3mm

.

.

Replacement part for these models:Slash 4X4 UltimateUnlimited Desert RacerAccessory part for these models:E-Revo VXL BrushlessRustler 4X4 VXLTRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

FEATURES: Steel construction          Cap head with hexagon socket drive insert          Metal lock...

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler...

Tires and wheels, assembled, glued (TRX-4 satin beadlock wheels, Canyon Trail 1.9 tires) (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

.

.

Beadlock rings, black (1.9") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, green (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, satin (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Body, GTS shock, long (silver aluminum) (1) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Shocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and...

Shocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and...

Springs, shock, long (natural finish) (GTS) (0.47 rate) (for use with TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Suspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Suspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4...

Suspension links, front lower, blue (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)

FEATURES: Replaces damaged or worn spur gear assemblies Constructed of plastic INCLUDES: One spur gear assembly REQUIRES: Diassembly of gearbox and installing spur gear onto primary gear shaft (4993)

Tube chassis, inner panels, aluminum (blue-anodized) (front (2)/ wheel well (4)/ middle (4)/ rear (2))

Tires and wheels, assembled (Method 105 black chrome beadlock wheels, Canyon Trail 1.9" tires, foam inserts) (1 left, 1 right)

.

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Hard anodized coated T-6 aluminum shock bodies with pistons and ball ends...

High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal...

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball...

This digital high-torque, ball bearing servo features the same precision control, quick response, and incredible torque as the 2070 model, but adds a waterproof case for worry-free driving in water,...

LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas iD batteries) Accessory part for these models: 1/16 E-Revo VXL 1/16 E-Revo 1/16 Slash 4WD 1/16 Summit VXL 1/16...

LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas iD batteries) Accessory part for these models: 1/16 E-Revo VXL 1/16 E-Revo 1/16 Slash 4WD 1/16 Summit VXL 1/16...

.

FEATURES: Aluminum Construction Polished Silver in Color Threaded for Easy Adjustment INCLUDES: One Silver Polished Threaded Aluminum GTR Shock Body REQUIRES: Assembly onto Vehicle Parts to Complete...

Features: Sturdy black plastic construction Includes: (1) Left and (1) right gearbox half Assembly screws are not included

FEATURES: Helps to control shifting of gears when the two speed conversion kit is installed INCLUDES: Shift Fork and Shaft REQUIRES: Installing over the Carrier/Drive Dog (TRAC3986) in the gearbox

.

Pro-Scale Realism Flood the desert with brilliant white light with the new High Intensity LED Off-Road Light Kit for the Traxxas Unlimited Desert Racer.  Traxxas innovation delivers...

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

.

Beadlock rings, blue (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

Beadlock rings, green (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

.

.

.

Gear set, differential (spider gears (4), spider gear shaft (2)) 

Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTW

.

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

.

.

Push bar, bumper (chrome) (fits #8069 bumper) Accessory part for these models: TRX-4 Ford Bronco  

Linkage, sway bar, rear (2) (assembled with hollow balls)/ sway bar arm (left & right)

.

.

.

Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler INCLUDES: 2- plastic hex collars (wheel adapters) 4- stub axle pins

FEATURES: Cushioned double sided tape Anti-stick backing on each side kept until tape is applied INCLUDES: Two 25x25mm squares REQUIRES: Application SPECS: Length: 25mm Width: 25mm Thickness:...

This is the set of Traxxas Long GTR Shock Springs with 0.623 Orange Compression Rate. FEATURES Steel construction, white in...

This is the optional 15 Tooth Pinion Gear for the Traxxas X-Maxx. FEATURES Hardened steel construction Replaces stock 6491X 18T...

FEATURES: Steel construction   INCLUDES: Three Pinion Gear with set screw

FEATURES: Replaces missing or damaged brake cams Brake cam is blue aluminum Cam lever and grub screw are steel INCLUDES: One blue aluminum brake cam One cam lever One 3mm grub screw REQUIRES:...

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Black Plastic Steering Blocks Aluminum Wheel Spindles INCLUDES: Two Steering Blocks Two Wheel Spindles REQUIRES: Traxxas Nitro Stampede, Nitro Sport, or Nitro Rustler. COMMENTS: None

Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

FEATURES: Metal gear shafts Metal and plastic main differential INCLUDES: Main differential with steel ring gear Planetary gears and shafts Sun gears and shafts Silicone grease REQUIRES: Installation...

FEATURES: Anodized aluminum construction, blue in color Black nylon ball ends INCLUDES: One 49mm blue aluminum turnbuckle REQUIRES: Installation onto vehicle

Battery charge indicators (green (4), blue (4), grey (4)) Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries,...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Fan-cooled          21 turns          14 volt         ...

.

Tube chassis, inner panels (front (2)/ middle (4)/ rear (2)) Replacement part for these models: Unlimited Desert Racer

Spur gear, 62-tooth Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT ​

Driveshaft, center, aluminum (green-anodized) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT  

Mounts, suspension arms, aluminum (red-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Tires and wheels, assembled, glued (Tactical wheels, Canyon Trail 1.9 tires) (2)

Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended stub axle)

Tailgate panel insert (clear, requires painting)/ adhesive foam tape (2) Replacement part for these models: TRX-4 Ford Bronco

Tailgate panel/ tail light lens (2) (left & right)

Bumper, rear (chrome)/ bumper mount/ 3x10 BCS (2)  Replacement part for these models: TRX-4 Ford Bronco

 

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, now in 1/16 scale. The wheelie bar mount is constructed of durable composite nylon and it offers an extra...

Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw. Accessory part for these models: E-Revo VXL Brushless X-Maxx

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears) 12-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur...

11-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw  Accessory part for these models: E-Revo VXL Brushless X-Maxx.

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Replacement part for these models: E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo Rally VXL Revo Slash 4X4...

Ball bearings, black rubber sealed (10x15x4mm) (2) Replacement part for these models: Ford Fiesta® ST Rally Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 Stampede 4x4...

Hold downs, battery (blue-anodized) (2)/ adhesive foam battery pads/ shoulder screws (2)/battery hold-down posts (4)/ clips (4)

The Traxxas parallel and series connectors are for use with (#2925X) 7.2V NiMH battery packs only.

FEATURES Connects both batteries in series to the electronic speed control 16AWG size wire Traxxas High Current connectors with gold plated terminals ...

.