Fury Mega

This is a package of four 5x1mm O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour 5x1mm O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")Thickness: 1mm (0.039")

These are the 2.5 x 25mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite, Fury andMojave to hold the outer part of the suspension arms in placeINCLUDESTwo 2.5 x 25mm Screw Hinge Pins

These are the 2.5 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the outer part of the rear suspension arms in placeINCLUDESTwo 2.5 x 29.5mm Screw Hinge Pins

These are the 3 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the the front upper suspension arms in placeINCLUDESTwo 3 x 29.5mm Screw Hinge Pins

These are the 3 x 37.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the inner part of the front suspension arms in placeINCLUDESTwo 3 x 37.5mm Screw Hinge Pins

This is the O-Ring Set from Arrma.FEATURESUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyinside the front and rear shocksINCLUDESFour Large and two Small O-Rings

These are the 7 x 4.6 x 6mm Steering Bushings from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyin the steering assemblyINCLUDESTwo 7 x 4.6 x 6mm Steering Bushings

This is the Arrma Battery Door Clip Retainer in Red.FEATURESFor use on the Arrma Fury, Granite, Raider and Vorteks vehiclesRubber constructionFinger grip assists with battery door pin removalINCLUDESBattery Door Clip Retainer in Red

These Foam Body Washers provide cushioning between the body mount platform and the body shell of your vehicle. They have been designed to securely fit to the body mount of your ARRMA vehicle so that they do not fall-off when the body shell is removed...

The MEGA brushed ESC jumper is the brains behind adjusting the MEGA speed controller. This item is used to program the features of the NiMh battery mode or the LiPo battery mode (Low Voltage cutoff enabling). You can also adjust whether or not to enable...

This is a pair of Large Cap Head 3x6mm Motor Screwsfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Large Cap Head 3x6mm Motor Screws

These are the 4mm Flange Lock Nuts from Arrma.     FEATURES Steel construction Used on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Nero to hold the wheels to the hub...