Fury Mega

This is the 87 Tooth 48 pitch Spur Gear from Arrma.FEATURESComposite plastic constructionStock spur gear used in the Arrma Vortex Granite, Fury and MojaveOptional for the Arrma Raider and ADX-10INCLUDES87 Tooth 48 pitch Spur Gear

This is a Diff Case Gasket from Arrma.FEATURESFits all Arrma vehiclesConstructed of composite materialINCLUDESDiff Case Gasket

This is a package of two 2014 spec Slipper Pads from Arrma.FEATURESFits all Arrma vehiclesConstructed of hard-wearing composite friction materialLow friction slipper pad surface for consistent slipper clutchoperationINCLUDESTwo 2014 spec Slipper Pads

This is the Mud Flap Set from Arrma.FEATURESRubber construction, black in colorFits the Arrma Vortex, Granite, Fury and MojaveFastens to rear of body behind tiresINCLUDESTwo Mud Flaps

These are the Arrma Battery Door Pins.FEATURESFor use on the Arrma Fury, Granite, Raider and Vorteks vehiclesComposite plastic constructionProvides easy battery door opening and closureINCLUDESThree Arrma Battery Door Pins

The MEGA brushed ESC jumper is the brains behind adjusting the MEGA speed controller. This item is used to program the features of the NiMh battery mode or the LiPo battery mode (Low Voltage cutoff enabling). You can also adjust whether or not to enable...

This is a package of four 5x1mm O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour 5x1mm O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")Thickness: 1mm (0.039")

These are the 2.5 x 25mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite, Fury andMojave to hold the outer part of the suspension arms in placeINCLUDESTwo 2.5 x 25mm Screw Hinge Pins

These are the 2.5 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the outer part of the rear suspension arms in placeINCLUDESTwo 2.5 x 29.5mm Screw Hinge Pins

These are the 3 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the the front upper suspension arms in placeINCLUDESTwo 3 x 29.5mm Screw Hinge Pins

This is the O-Ring Set from Arrma.FEATURESUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyinside the front and rear shocksINCLUDESFour Large and two Small O-Rings

These are the 7 x 4.6 x 6mm Steering Bushings from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyin the steering assemblyINCLUDESTwo 7 x 4.6 x 6mm Steering Bushings