Slash 4x4

**Body modification is required to allow the Spare Tire Carrier** **to fit correctly.** FEATURES Nylon construction, black in color One wheel and tire must be installed to satisfy the RPM...

FEATURES: Blue in color Fits the Traxxas Slash 4x4 INCLUDES: One Blue Aluminum LW Center Drive Shaft

STRC Aluminum LW Center Main driveshaft for Slash 4x4 (Gun Metal) Maintaining our motto of both great performance and good looks, our LW center drive shafts allows you change out your existing blue center shaft to match up to our other anodized color...

FEATURES: Red in color Fits the Traxxas Slash 4x4 INCLUDES: One Red Aluminum LW Center Drive Shaft

Heat sink (fits #3351R and #3461 motors)The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the...

Gear set, center differential (output gears (2)/ spider gears (4)/ spider gear shaft (2))Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4

Drag link, machined 6061-T6 aluminumBoost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link with a colorful anodized finish.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

Drag link, machined 6061-T6 aluminumBoost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link with a colorful anodized finish.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

Drag link, machined 6061-T6 aluminum (red-anodized)Accessory part for these models:Hoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

Drag link, machined 6061-T6 aluminumBoost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link with a colorful anodized finish.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

Driveshaft, center, 6061-T6 aluminum (green-anodized)Accessory part for these models:Ford Fiesta® ST RallySlash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4

Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to eliminate driveline play. The vivid anodized finish...

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)Replacement differential output yokes for the Extreme Heavy Duty Upgrade Kit. Yokes are...

Quick Notes: – replaces stock Traxxas #7430 – two-piece design for ease of front-end maintenance – incorporated side dirt shields Product Description Designed from the ground up, the RPM Low Center of Gravity front...

Quick Notes: – replaces stock Traxxas #7430 – two-piece design for ease of front-end maintenance – incorporated side dirt shields Product Description Designed from the ground up, the RPM Low Center of Gravity front...

FEATURES: CNC machined aluminum Allows battery to be moved easily to change weight distribution Provides better access for LiPo batteries with plugs located on the side of the pack INCLUDES: ST Racing Pro Racing Battery Strap in Green

FEATURES CNC machined aluminumAllows battery to be moved easily to change weight distributionProvides better access for LiPo batteries with plugs located on theside of the pack   INCLUDES ST Racing Pro Racing Battery Strap in Gun Metal...

FEATURES: CNC machined aluminum construction, silver in color Finned for efficient heat dissipation INCLUDES: Heat Sink Motor Plate for use with the LCG conversion kit

FEATURES: Metal and rubber construction INCLUDES: One outdrive Two O-rings One setscrew

FEATURES: Nylon construction Black in color May be modified to fit other applications INCLUDES: One MountingPlate Four Clear Lenses Four Light Canisters Four Light Guards Four M3x8mm Flathead Screws Instruction sheet

Body, GTR xx-long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler 4X4 VXL

Stub axle, rear, steel-splined constant velocity (1)Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled...

Accessory part for these models:Hoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

FEATURES: Black in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

FEATURES: Green in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

FEATURES: Blue in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

Description RPM A-arms for the Traxxas Slash 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening...

FEATURES: Rubber construction Black in color INCLUDES: Two Mud Flaps Two Support Arms Two Screw Supports Four 3x10mm Buttonhead Screws Four 3x16mm Buttonhead Screws Instruction Sheet

Replacement CNC Machined aluminum 17mm Hex Lock-nut (4 pcs) Works with Slash 4x4, Slash 2wd, Wraith/Axial 17mm hex adapters.

This is the GPM Racing Traxxas aluminum motor plate with heatsink fins for Slash 4X4 vehicles.

LED light harness, rear (requires #5838, 6737X, 6777X, or 6836X rear bumper)Replacement rear LED lights for LED light kits.Replacement part for these models:Rustler® 4X4Slash 4X4SlashStampede® 4X4Accessory part for these models:Rustler® 4X4Rustler® 4X4...

Mount, telemetry expander (requires #6730 chassis brace kit)The telemetry expander mount fits over the 6730 chassis brace to provide a secure base to mount the optional TQi™ Telemetry Expander.Accessory part for these models:Rustler® 4X4 VXLRustler®...

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash...

Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

91 mm camber links (80 mm center to center) come assembled with rod ends and hollow ballsReplacement part for these models:Rustler® 4X4 VXLSlash® 4X4 VXL EHDStampede® 4X4 VXLAccessory part for these models:Rustler® 4X4 BrushlessSlash® 4X4...

DescriptionHave you upgraded your stock ESC to Castle’s awesome Sidewinder 4 but don’t trust double-sided tape or zip ties to “securely” attach it to the chassis? RPM has you covered! Our lightweight Sidewinder 4 ESC Cage fits in the stock...

This is an optional Female C-CVD Spline Bone from MIP for use on the Traxxas Slash 4x4     FEATURES Steel construction Black in color   INCLUDES ...

Plastic Ball Ends For GPM Optional Turnbuckles Item# SLA160P For Traxxas Slash 4X4 & Telluride 4X4 – 14Pc SetColor : BlackReplacement ball ends for GPM optional tie rods Item# SLA160P.Suitable for GPM optional tie rods only. Not suitable for the...

FEATURES: Nylon construction Black in color Can be used on front or rear INCLUDES: Two body posts One body mount bracket One thin spacer One thick spacer Two M3x16mm button head screws Instructions Tech Notes: RPM Body Mounts can be mounted in...

Quick Notes: - RPM long rod ends replace Traxxas stock #5525 – requires stock Traxxas pivot balls FEATURES For use with all versions of the Traxxas Slash 2wd, Slash 4x4, Summit, T-Maxx,...

Optional 12mm Hex Adapters from Tekno                    for use on the Traxxas Slash 4X4.FEATURES: Hardened plastic/nylon...

Ball bearings, black rubber sealed (10x15x4mm) (2) Replacement part for these models: Ford Fiesta® ST Rally Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 Stampede 4x4 VXL Stampede 4x4 Telluride 4x4 TRX-4 Assembly Kit TRX-4 Ford...

Bulkhead tie bars, front & rear, aluminum (green-anodized)Set of front and rear bulkhead tie bars with a brilliant green anodized finish.Accessory part for these models:Ford® Fiesta® ST RallyRustler® 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Plate, motor, orangeAccessory part for these models:Rustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 Ultimate

Plate, motor, greenAccessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4Ford Fiesta® ST Rally

Plate, motor, redAccessory part for these models:Rustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 Ultimate

Replacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade kit only and will not fit standard suspension parts.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4...

Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)Replacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade...

FEATURES: Composite plastic, blue in color Protects the sides of the chassis from side impacts, roll overs and T-bone crashes INCLUDES: Two RPM Nerf Bars  

Features: Made of Anodized AluminumSpecs: 47x9.2mmFits: Slash 4x4 Includes: Front Arms Brace (1)

Features: Made of Anodized AluminumSpecs: 47x9.2mmFits: Slash 4x4 Includes: Front Arms Brace (1)

Features: Made of Red Anodized AluminumSpecs: 47x9.2mmFits: Slash 4x4 Includes: Front Arms Brace (1)

Features: Made of Anodized AluminumSpecs: 47x9.2mmFits: Slash 4x4 Includes: Front Arms Brace (1)

Features:Made of Anodized AluminumSpecs: 53x9.2mmFits: Slash 4x4 Includes: Rear Arms Brace (1)

Features:Made of Anodized AluminumSpecs: 53x9.2mmFits: Slash 4x4 Includes: Rear Arms Brace (1)

Features:Made of Anodized AluminumSpecs: 53x9.2mmFits: Slash 4x4 Includes: Rear Arms Brace (1)

Features: Made of Anodized AluminumSpecs: 53x9.2mmFits: Slash 4x4 Includes: Rear Arms Brace (1)

These are the optional Hot-Racing Slipper Clutch Pads for the Traxxas Slash 4x4.     FEATURES Constructed of hard anodized CNC machined aluminum Thirty day limited warranty beginning at...

Bulkhead, frontReplacement part for these models:Ford Fiesta® ST RallyRally VXLRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash...

Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash...

Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts.Replacement part for these models:Ford® F-150® Raptor R™ 4X4Ford® Fiesta® ST...

Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash...

Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). Axle carriers are for use with the 9080-series upgrade kit only and will not fit standard suspension parts.Accessory...

Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not fit standard axles.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4...

Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not fit standard axles.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4...

FEATURES: Constructed of machined billet steel INCLUDES: 0.8 32 Pitch 18 Tooth Pinion Gear with Set Screw

Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)Accessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle...

Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)

Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)

Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)

Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))Replacement part for these models:Slash 4X4 UltimateUnlimited Desert Racer

Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

FEATURES This hinge-pin is made of steel INCLUDES Two hinge pins

Gear set (for 2070, 2075 servos)Replacement part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLE-Revo VXL BrushlessFord F-150 RaptorFord GT®Ford Mustang GTRustler 4X4 VXLRustler VXLSlash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Y-harness, BEC to LED light setReplacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler® 4X4Rustler®Slash 4X4SlashStampede® 4X4Stampede®Accessory part for these models:Rustler® 4X4Bandit® VXLBandit®BIGFOOT® No. 1...

Spacers (4)/ grip pads (3)/connector dust cover (1) (for TQi docking base) Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:SummitT-Maxx

Seal kit, expander box (includes o-ring, seals, and silicone grease) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Bandit VXL E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo VXL Brushless Ford F-150...

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4...

Body washers, foam, 2mm (2)/ 3mm (2)/ 4mm (4)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 SummitBandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed ReplicaCraniac®E-Maxx...