Sledge

Steering blocks, left & right/ steering block arms (aluminum, blue-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)Add strength and beauty to your Sledge® with these colorful steering blocks. Brightly-anodized steering block arms secure the turnbuckles...

Made from carbon fiber, light weight and offer good protection for the front suspension arms.Effectively prevent dust, stones, weeds and other sundries from entering and damaging dog bones and other accessories.Package includes : Carbon fiber Protective...

Made from carbon fiber, light weight and offer good protection for the front suspension arms.Effectively prevent dust, stones, weeds and other sundries from entering and damaging dog bones and other accessories.Package includes : Carbon fiber Protective...

Made from 4140 carbon steel for stronger use and smooth driving performance.Suitable for replacing the original center dog bone.Package includes : Long Dogbone-1pc ; Short Dogbone-1pc.Original stock part number : 9555 + 9556.Will fit : Traxxas 1/8 4WD...

Made from medium carbon steel.Stronger and great durability to achieve smooth driving performance.Package includes : Diff Outdrive - 2pcs.Original stock part number : 9586.Will fit : Traxxas 1/8 4WD SLEDGE Monster Truck 95076-4

Made from medium carbon steel.Stronger and great durability to achieve smooth driving performance.Package includes : Drive Cup - 2pcs.Original stock part number : 9587.Will fit : Traxxas 1/8 4WD SLEDGE Monster Truck 95076-4

Made from stainless steel for great durability and stability and can prevent rusting.Fix the rear lower swing arm.Package includes : Bulkhead Tie Bar - 2pcs.Original stock part number : 9528.Will fit : Traxxas 1/8 4WD SLEDGE Monster Truck 95076-4

Features:For: 1/8 Traxxas SledgeMaterial: High-quality aluminum with Silver chamfered edgesColor: BlackFits: Front or RearIncludes:Aluminum Heavy Duty Differential Carrier Case with screws

Features:For: 1/8 Traxxas SledgeMaterial: High-quality aluminum with Silver chamfered edgesColor: BlueFits: Front or RearIncludes:Aluminum Heavy Duty Differential Carrier Case with screws

Features:For: 1/8 Traxxas SledgeMaterial: High-quality aluminum with Silver chamfered edgesColor: RedFits: Front or RearIncludes:Aluminum Heavy Duty Differential Carrier Case with screws

Replacement hardened steel rear center driveshaft for 9655X hardened steel center CV driveshafts. (Does not fit standard center driveshafts)Accessory part for these models:Sledge®

Driveshaft, rear, steel constant-velocity (shaft only) (1) (for use only with #9654X rear steel CV driveshafts)Replacement driveshaft for 9654X hardened steel rear CV driveshafts. (Does not fit standard rear driveshafts)Accessory part for these...

Widen the track of your Sledge® with these offset wheel hubs for 9572-series wheels. The set includes four +5 mm hubs and four +10 mm hubs to fine tune the handling of your Sledge. (fits 17 mm splined axle hubs) Must reuse 4x12 mm screws from 9572-series...

Made from tough 6061-T6 aluminum, this colorful wing washer adds strength and style to your Sledge®. Includes 4x12 mm screws (2)Accessory part for these models:Sledge®

Made from tough 6061-T6 aluminum, this colorful wing washer adds strength and style to your Sledge®. Includes 4x12 mm screws (2)Accessory part for these models:Sledge®

Made from tough 6061-T6 aluminum, this colorful wing washer adds strength and style to your Sledge®. Includes 4x12 mm screws (2)Accessory part for these models:Sledge®

Made from tough 6061-T6 aluminum, this colorful wing washer adds strength and style to your Sledge®. Includes 4x12 mm screws (2)Accessory part for these models:Sledge®

Made from tough 6061-T6 aluminum, this colorful wing washer adds strength and style to your Sledge®. Includes 4x12 mm screws (2)Accessory part for these models:Sledge®

Made from medium carbon steel for good sturdiness and wear resistance. Outer hexagonal design of the head, more convenient to disassemble and assemble. Not easy to slide.*Note: Equipped with a 4.0mm drill bit to expand the hole position. This product is...

Body mount, frontReplacement part for these models:Sledge™

Side guards, chassis (left and right)/ 3x8 CCS (10)Replacement part for these models:Sledge

Bulkhead, front or rearReplacement part for these models:Sledge™

Caster blocks (c-hub), left & right/ kingpin bushings (4)Replacement part for these models:Sledge

Suspension arm, rear (right)Replacement part for these models:Sledge

Suspension arm, rear (right)Replacement part for these models:Sledge

Suspension arm, rear (right)Replacement part for these models:Sledge

Suspension arm, rear (right)Replacement part for these models:Sledge

Suspension arm, rear (right)Replacement part for these models:Sledge

Suspension arm, rear (left)Replacement part for these models:Sledge

Suspension arm, rear (left)Replacement part for these models:Sledge

Suspension arm, rear (left)Replacement part for these models:Sledge

Suspension arm, rear (left)Replacement part for these models:Sledge

Suspension arm, rear (left)Replacement part for these models:Sledge

Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)Replacement part for these models:Sledge

Tray, batteryReplacement part for these models:Sledge™

Spur gear, 46-tooth, steel (1.0 metric pitch)Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual...

Spur gear, 52-tooth, steel (1.0 metric pitch)Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual...

Shock shaft, 80mm (GT-Maxx®) (steel, chrome finish) (2) (assembled with rod ends and steel hollow balls)Replacement part for these models:Sledge

Features:For: 1/8 Traxxas SledgeMaterial: High-quality 7075 aluminum Color: BronzeIncludes:7075 Heavy Duty Metal Differential Locker

Medium Carbon Steel Front And Rear Suspension Inner PinsMade from medium carbon steel for good sturdiness and wear resistance.Suitable for front or rear.Package includes : Front and Rear Suspension inner pins 4x67mm-4pcs.Original stock part number : 9541...

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Wheels, 3.8" (black) (2) (17mm splined)Replacement part for these models:Sledge™

Made from aluminum 7075-T6 material for greater strength and durability.Suitable for original stock gear ratio 13-52T.Fix underbody motor base position.Package includes : Motor base reinforcement-4pcs ; Stainless Steel Flat Head Screw 4*10-4pcs.Will fit...

Gear, 12-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw12-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screwReplacement part for these models:Sledge™

Body support, center/ 3x16 CS (8)Replacement part for these models:Sledge™

Latch, body mount, rearReplacement part for these models:Sledge™

Bumper, front/ skidplate, front/ tie bar mount, front/ 3x25 CS (2)Replacement part for these models:Sledge™

Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3x25 CS (2)Replacement part for these models:Sledge™

Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)Replacement part for these models:Sledge

Boots, driveshaft (2)/ retainer (assembled) (2)Replacement part for these models:Sledge™

The breakaway cable provides a single connection for the Sledge 9690 light kit, ensuring quick and safe disconnection from the Power Amplifier when removing the body. The included mount secures the cable to the T-Bar for a rock solid installation...

Shock wraps for original and GPM optional shocks,GPM optional shocks model no. : SLE128F, SLE128F/L, SLE128F/LA, TXMS125F/R, TXMS125F/R/L, TXMS125FRL/2.Ultimate protection and preservation of your suspension.Package includes : Shock wraps - 4pcs.Suitable...

Shock wraps for original and GPM optional shocks,GPM optional shocks model no. : SLE128F, SLE128F/L, SLE128F/LA, TXMS125F/R, TXMS125F/R/L, TXMS125FRL/2.Ultimate protection and preservation of your suspension.Package includes : Shock wraps - 4pcs.Suitable...

Shock wraps for original and GPM optional shocks,GPM optional shocks model no. : SLE128F, SLE128F/L, SLE128F/LA, TXMS125F/R, TXMS125F/R/L, TXMS125FRL/2.Ultimate protection and preservation of your suspension.Package includes : Shock wraps - 4pcs.Suitable...

Shock wraps for original and GPM optional shocks,GPM optional shocks model no. : SLE128F, SLE128F/L, SLE128F/LA, TXMS125F/R, TXMS125F/R/L, TXMS125FRL/2.Ultimate protection and preservation of your suspension.Package includes : Shock wraps - 4pcs.Suitable...

Body reinforcement set, black/ skid pads (roof) (fits #9511 body)Replacement part for these models:Sledge™

Body reinforcement set, green/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge™

Body reinforcement set, red/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge™

Body reinforcement set, orange/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge

Body reinforcement set, blue/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge™

Driveshaft, center, rear (shaft only, 4mm x 146.5mm) (1)Replacement part for these models:Sledge™

Steering block arms, carbon fiber (2) (fits #9635 series & 9637 series steering blocks)Take your Sledge® to the next level of performance with genuine carbon fiber upgrade parts. These steering block arms are made from multiple layers of superlight...

Chassis brace, front/ 4x15 CCS (2)Replacement part for these models:Sledge

Toe links, front (120mm) (2) (assembled with hollow balls)Replacement part for these models:Sledge™

Stub axle, frontReplacement part for these models:Sledge™

Stub axle, rear (for use only with #9557 rear driveshaft)Replacement part for these models:Sledge™

Driveshaft, center, front (shaft only, 4mm x 88mm) (1)Replacement part for these models:Sledge

Mount, center differentialReplacement part for these models:Sledge™

Differential output cup, center (hardened steel)/ 2.5x12mm pinReplacement part for these models:Sledge™

Linkage, sway bar (front or rear)Accessory part for these models:Sledge™

Change the color of your 9637-series steering blocks with these brightly anodized aluminum steering block arms. Includes mounting screws.Accessory part for these models:Sledge™

Steering block arms (aluminum, green-anodized) (2) (fits #9635 series & 9637 series steering blocks)Change the color of your 9637-series or 9635-series steering blocks with these brightly-anodized aluminum left and right steering block arms. Includes...

Steering block arms (aluminum, red-anodized) (2) (fits #9635 series & 9637 series steering blocks)Change the color of your 9637-series or 9635-series steering blocks with these brightly-anodized aluminum left and right steering block arms. Includes...

Change the color of your 9637-series steering blocks with these brightly anodized aluminum steering block arms. Includes mounting screws.Accessory part for these models:Sledge™

Change the color of your 9637-series steering blocks with these brightly anodized aluminum steering block arms. Includes mounting screws.Accessory part for these models:Sledge™

Set of four standard rod ends with hollow balls (Fits 9547 and 9548-series camber links and 9549-series toe links)Accessory part for these models:Sledge®

Springs, shock (natural finish) (GT-Maxx®) (1.671 rate) (85mm) (2)Accessory part for these models:Sledge

Springs, shock (natural finish) (GT-Maxx®) (1.569 rate) (85mm) (2)Accessory part for these models:Sledge

Springs, shock (natural finish) (GT-Maxx®) (1.487 rate) (85mm) (2)Replacement part for these models:Sledge

Hollow balls, steel (8)Replacement part for these models:Sledge™

Bellcrank posts, steering (aluminum, blue-anodized)Replacement part for these models:Sledge™

Draglink, steering/ 3x14mm SS (2)Replacement part for these models:Sledge™

Draglink, steering, 6061-T6 aluminum (dark titanium-anodized)/ 3x14mm SS (2)Give your Sledge® a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes 3x14 mm shoulder screws (2)Accessory part for these models:Sledge®

Draglink, steering, 6061-T6 aluminum (green-anodized)/ 3x14mm SS (2)Give your Sledge® a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes 3x14 mm shoulder screws (2)Accessory part for these models:Sledge®

Draglink, steering, 6061-T6 aluminum (red-anodized)/ 3x14mm SS (2)Give your Sledge® a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes 3x14 mm shoulder screws (2)Accessory part for these models:Sledge®

Draglink, steering, 6061-T6 aluminum (orange-anodized)/ 3x14mm SS (2)Give your Sledge® a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes 3x14 mm shoulder screws (2)Accessory part for these models:Sledge®

Camber links, front (117mm) (2) (assembled with hollow balls)Replacement part for these models:Sledge

Camber links, rear (144mm) (2) (assembled with hollow balls)Replacement part for these models:Sledge™

Mount, shock (steel) (2)Replacement part for these models:Sledge™

Hold down, batteryReplacement part for these models:Sledge™