Stampede 4x4

Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Package includes : Differential Gear set - 1pc.Original stock part number : 3956X.Suitable models : Traxxas 1/10 4WD Ford F-150 Raptor 101076-4, 4WD Hoss 4X4...

Material upgraded to aluminum 7075-T6, more stable, good heat resistant, good heat radiating.Stabilize and protect the differential gears.Package includes : Diff case-1pc ; Plastic washer-1pc ; Cap Head Screws 2.5x8-4pcs.Original stock part number : 3978...

Material upgraded to aluminum 7075-T6, more stable, good heat resistant, good heat radiating.Stabilize and protect the differential gears.Package includes : Diff case-1pc ; Plastic washer-1pc ; Cap Head Screws 2.5x8-4pcs.Original stock part number : 3978...

Gear set, metal, high speed (for 2070, 2075 servos)Replacement part for these models:Slash 4X4 UltimateTRX-4 Ford BroncoUnlimited Desert RacerAccessory part for these models:E-Revo VXL BrushlessRustler 4X4 VXLTRX-4 1979 Chevrolet BlazerTRX-4 Ford...

When racing on a loamy or top soil track surface the inside of the Stampede 4x4 chassis can become loaded with dirt or debris which creates extra weight.   With the JConcepts over-tray these worries are minimized with the simple and...

Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5mm PTFE-coated washers (2)/ 2.5x8 CCS (4)Requires: Traxxas #3956X Spur GearAccessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4...

Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

These are the Hot Racing 12mm Wheel Hex Extensions.     FEATURES Aluminum construction, silver in color Fits the 5mm diameter axles on Traxxas 4WD Slash, Stampede and Rally Extends...

Made from 7075 alloy, a light material with high tensile strength for great durability during extreme RC action.Precise bearing position minimizes gap and friction, the rear wheel joints can rotate smoothly and the wheels will be more stable.Package...

Made from 7075 alloy, a light material with high tensile strength for great durability during extreme RC action.Precise bearing position minimizes gap and friction, the rear wheel joints can rotate smoothly and the wheels will be more stable.Package...

Made from 7075 alloy, a light material with high tensile strength for great durability during extreme RC action.Precise bearing position minimizes gap and friction, the rear wheel joints can rotate smoothly and the wheels will be more stable.Package...

Made from 7075 alloy, a light material with high tensile strength for great durability during extreme RC action.Precise bearing position minimizes gap and friction, the rear wheel joints can rotate smoothly and the wheels will be more stable.Package...

Made from 7075 alloy, a light material with high tensile strength for great durability during extreme RC action.Precise bearing position minimizes gap and friction, the rear wheel joints can rotate smoothly and the wheels will be more stable.Package...

Made from 7075 alloy, a light material with high tensile strength for great durability during extreme RC action.Precise bearing position minimizes gap and friction, the rear wheel joints can rotate smoothly and the wheels will be more stable.Package...

Made with 7075 alloy material for better strength and greater durability.POM shims (4pcs) are provided to minimize the gap and strengthen the fitting for a smooth and stable drive.Multi positioning holes available for different angle of tie rods.Original...

Made with 7075 alloy material for better strength and greater durability.POM shims (4pcs) are provided to minimize the gap and strengthen the fitting for a smooth and stable drive.Multi positioning holes available for different angle of tie rods.Original...

Made with 7075 alloy material for better strength and greater durability.POM shims (4pcs) are provided to minimize the gap and strengthen the fitting for a smooth and stable drive.Multi positioning holes available for different angle of tie rods.Original...

Made with 7075 alloy material for better strength and greater durability.POM shims (4pcs) are provided to minimize the gap and strengthen the fitting for a smooth and stable drive.Multi positioning holes available for different angle of tie rods.Original...

Made with 7075 alloy material for better strength and greater durability.POM shims (4pcs) are provided to minimize the gap and strengthen the fitting for a smooth and stable drive.Multi positioning holes available for different angle of tie rods.Original...

Made with 7075 alloy material for better strength and greater durability.POM shims (4pcs) are provided to minimize the gap and strengthen the fitting for a smooth and stable drive.Multi positioning holes available for different angle of tie rods.Original...

Optional Aluminum Rear Shock Towerfor the Traxxas 4x4 Slash, StampedeFEATURES:6061-T6 Aluminum construction, Black in colorReplaces worn or damaged Front shock towerYOU WILL RECEIVE:One Black Rear shock towerREQUIREMENTS:Installation following the model...

These are the Integy T3 Upper Arm Links for the 1/10 scale Traxxas Stampede 4x4 and Slash 4x4.     FEATURES Steel shafts and ball inserts with hardened plastic ball ends   ...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an...

Features:For: Traxxas Stampede Slash Rustler 4x4Material: AluminumColor: BlackFits: Front Or RearIncludes:Aluminum Body Post & Mount with screws (1)

Hot Racing Power Up Slipper Eliminator Gear Adapter for the 1/10 Traxxas E-Maxx, E-Revo, Rally, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, Summit, and T-Maxx 3.3. FEATURES: - Eliminates the transmission slipper assembly to transmit all...

Hot Racing Power Up Slipper Eliminator Gear Adapter for the 1/10 Traxxas Bandit, Jato 3.3, Rally, Rustler, Slash 2WD, Slash 4X4, Stampede 2WD, and Stampede 4X4.FEATURES:- Eliminates the transmission slipper assembly to transmit all power to wheels...

This is the optional Tekno RC Big Bone Center Driveshaft for the Traxxas Stampede 4x4. FEATURES Machined anodized aluminum construction Dog bone design will not bind, split or...

FEATURES Machined hardened steel with a blackened finish that improves lubricity and anti-galling (metal failure from friction) Accepts telemetry   INCLUDES ...

Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6780 center differential)Accessory part for these models:Rally VXLRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)

FEATURES Machined hardened steel with a blackened finish that improves lubricity and anti-galling (metal failure from friction) Accepts telemetry   INCLUDES ...

This is the optional ST Racing Aluminum Front Shock Set in Red for the Traxxas 1/10 scale Electric Slash 2wd, Slash 4x4, Stampede 4x4, Bandit, Rustler, Monster Jam and Nitro Slash. FEATURES CNC...

Hot Racing 54-tooth 0.8 metric pitch (compatible with 32-pitch) aluminum spur gear for the Traxxas Jato 3.3, Rally VXL, Slash 4X4, Stampede 4X4, and T-Maxx 3.3 with slipper clutch transmissionsFEATURES:- CNC machined 6061-T6 aluminum- Direct fit...

FEATURES: Plastic construction INCLUDES: Two Caster Blocks and two Steering Blocks

- 1 - MIP Confetti Sticker, 2.185 x .65 Black- 1 - Nut, M4 x .7mm Steel Locknut- 1 - SHSS, M3 x 4mm Flat Point- 1 - MIP Bearing Spacer, Rear, Traxxas Slash/ Slash 4x4- 1 - MIP X-Duty Axle, Slash 4x4 Rear- 1 - MIP X-Duty Hex Adapter, Traxxas Slash, Rust,...

Optional Robinson Racing Steel Idler Gear                    for the Traxxas 1/10 scale Slash 2WD.FEATURES: Constructed of hardened steelINCLUDES: Steel Idler...

Heavy-Duty Suspension ArmsHeavy-duty suspension arms (#3655L) redHeavy-duty suspension arms for Slash, Stampede, and Rustler feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings...

Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

Heat sink (fits #3351R and #3461 motors)The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the...

Driveshaft, center, 6061-T6 aluminum (green-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

Driveshaft, center, 6061-T6 aluminum (red-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

Driveshaft, center, 6061-T6 aluminum (orange-anodized) (189mm)Formed from 6061-T6 aluminum, this 189 mm center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to...

Gear set, center differential (output gears (2)/ spider gears (4)/ spider gear shaft (2))Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4

Drag link, machined 6061-T6 aluminumBoost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link with a colorful anodized finish.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

Drag link, machined 6061-T6 aluminumBoost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link with a colorful anodized finish.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

Drag link, machined 6061-T6 aluminum (red-anodized)Accessory part for these models:Hoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

Drag link, machined 6061-T6 aluminumBoost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link with a colorful anodized finish.Accessory part for these models:Hoss® 4X4 VXLRustler® 4X4 VXLRustler®...

FEATURES: Metal and rubber construction INCLUDES: One outdrive Two O-rings One setscrew

Stub axle, rear, steel-splined constant velocity (1)Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled...

Accessory part for these models:Hoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

FEATURES: Black in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

FEATURES: Green in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

FEATURES: Blue in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

Description RPM A-arms for the Traxxas Slash 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening...

LED light harness, rear (requires #5838, 6737X, 6777X, or 6836X rear bumper)Replacement rear LED lights for LED light kits.Replacement part for these models:Rustler® 4X4Slash 4X4SlashStampede® 4X4Accessory part for these models:Rustler® 4X4Rustler® 4X4...

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash...

Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

91 mm camber links (80 mm center to center) come assembled with rod ends and hollow ballsReplacement part for these models:Rustler® 4X4 VXLSlash® 4X4 VXL EHDStampede® 4X4 VXLAccessory part for these models:Rustler® 4X4 BrushlessSlash® 4X4...

DescriptionHave you upgraded your stock ESC to Castle’s awesome Sidewinder 4 but don’t trust double-sided tape or zip ties to “securely” attach it to the chassis? RPM has you covered! Our lightweight Sidewinder 4 ESC Cage fits in the stock...

Quick Notes: - RPM long rod ends replace Traxxas stock #5525 – requires stock Traxxas pivot balls FEATURES For use with all versions of the Traxxas Slash 2wd, Slash 4x4, Summit, T-Maxx,...

Optional 12mm Hex Adapters from Tekno                    for use on the Traxxas Slash 4X4.FEATURES: Hardened plastic/nylon...

Ball bearings, black rubber sealed (10x15x4mm) (2) Replacement part for these models: Ford Fiesta® ST Rally Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 Stampede 4x4 VXL Stampede 4x4 Telluride 4x4 TRX-4 Assembly Kit TRX-4 Ford...

Bulkhead tie bars, front & rear, aluminum (green-anodized)Set of front and rear bulkhead tie bars with a brilliant green anodized finish.Accessory part for these models:Ford® Fiesta® ST RallyRustler® 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts.Replacement part for these models:Ford® F-150® Raptor R™ 4X4Ford® Fiesta® ST...

Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). Axle carriers are for use with the 9080-series upgrade kit only and will not fit standard suspension parts.Accessory...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

FEATURES: Constructed of machined billet steel INCLUDES: 0.8 32 Pitch 18 Tooth Pinion Gear with Set Screw

Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)Accessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle...

Accessory part for these models:Ford F-150 RaptorHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashStampede® 4X4 Unassembled KitStampede® 4X4 VXLStampede® 4X4

Gear set (for 2070, 2075 servos)Replacement part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLE-Revo VXL BrushlessFord F-150 RaptorFord GT®Ford Mustang GTRustler 4X4 VXLRustler VXLSlash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Y-harness, BEC to LED light setReplacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler® 4X4Rustler®Slash 4X4SlashStampede® 4X4Stampede®Accessory part for these models:Rustler® 4X4Bandit® VXLBandit®BIGFOOT® No. 1...

Seal kit, expander box (includes o-ring, seals, and silicone grease) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Bandit VXL E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo VXL Brushless Ford F-150...

Fixed gear adapterReplacement part for these models:BIGFOOT® 4X4 Brushless Officially Licensed ReplicaFord® F-150® Raptor R™ 4X4Stampede® 4X4 Brushless

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4...

Body washers, foam, 2mm (2)/ 3mm (2)/ 4mm (4)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 SummitBandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed ReplicaCraniac®E-Maxx...