X-Maxx

Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

Rod ends (4) (assembled with steel pivot balls) (replacement ends for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X)Accessory part for these models:X-Maxx

Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)Accessory part for these models:X-Maxx

These left and right caster blocks (C-hubs) were redesigned and beefed-up for XRT®. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength.Replacement part for...

These left and right steering blocks were redesigned and beefed-up for XRT®. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength. (Steering blocks require 5196A...

DescriptionIn response to customer demand, we’re proud to release a set of threaded hinge pins for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms,...

Medium Carbon Steel Motor Gear 12T For 1:5 Traxxas X Maxx 8S / X Maxx 6S - 2Pc Set BlackMade from medium carbon steel, stronger than the original gear, wear-resistance and better transmission...

Medium Carbon Steel Motor Gear 13T For 1:5 Traxxas X Maxx 8S / X Maxx 6S - 2Pc Set BlackMade from medium carbon steel, stronger than the original gear, wear-resistance and better transmission...

.

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

Body reinforcement set (fits #7711 body)Accessory part for these models:X-Maxx

X-Maxx tailgate protector, insert, and 3x8mm flathead hardware. Provides additional strength for rear and corners of X-Maxx for added durability.

Steering blocks, left & right (require 20x32x7 ball bearings)Replacement part for these models:X-Maxx®

Carriers, stub axle (left & right)Stub axle carriers for previous-spec X-Maxx using 5182A 20x27x4 bearing. For current-spec X-Maxx, please see #7752X and use 5196A 20x32x7 bearing.

Wheels (2) (for #7776 wheelie bar)Replacement part for these models:X-Maxx

Rubber wheelie bar tires look great and provide better grip than standard hard plastic wheels. (Fits 7775X wheelie bar wheels)Accessory part for these models:Maxx® Slash®Maxx®Sledge®X-Maxx®...

.

.

.

.

.

Strong and top quality material for long-lasting performance in extreme conditions.Perfect item when you are servicing your RC vehicle suspension.Prevent oil leakage and good sealing effect.Package...

Replacement wire harness for LED power supply

Servo saver spring

Replacement extension harness for LED light kit

Rear upper bulkhead fits 8s X-Maxx® and XRT®Replacement part for these models:X-Maxx® UltimateXRT® UltimateXRT®

Made with 7075 alloy, wear-resistant and durable.Anodized with hardening process for scratch-resistant and vibrant colors.Compatible with both the original and GPM optional differential Item# XRT011,...

Made with 7075 alloy, wear-resistant and durable.Anodized with hardening process for scratch-resistant and vibrant colors.Compatible with both the original and GPM optional differential Item# XRT011,...

The differential output gear washer is made of PTFE material.Corrosion resistance, good sealing performance, electrical insulation, and durable.Part location : Differential output gears.Package...

This is the GPM Racing Traxxas stainless steel servo tie rod for X-Maxx vehicles.

Ball bearings, black rubber sealed (6x13x5mm) (2) Replacement part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit Unlimited Desert...

11-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw  

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

14-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw. Accessory part for these models:

17-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

Seal kit, expander box (includes o-ring, seals, and silicone grease) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2

.

Aluminum Servo Tie Rod - 1Pc SetMade from quality light weight high tensile strength aluminum 6061T6 material.Offer great improvement, durability and stability.Package includes : Aluminum Tie Rod -...

.

.

4140 medium carbon steel universal joint and dog bone connecting pin.Can be used on the original and GPM optional drive shafts item no. TXM8170N, TXM8116S, TXM8190F/RNL, TXM8190SL.Package includes :...

4140 medium carbon steel universal joint and dog bone connecting pin.The pin is suitable for the rebuild kit of the 7750X heavy-duty X-Maxx driveshaft.Package includes : Collar - 2pcs.Original stock...

Universal joint and dog bone connecting steel pin.Connection between universal joint head and dogbone.The pin is suitable for the rebuild kit of the 7750X heavy-duty X-Maxx driveshaft.Package...

Steel motor shaft spacer and E-clip for Velineon® 1200XL motorReplacement part for these models:X-Maxx® UltimateX-Maxx®XRT® UltimateXRT®