Reef's RC

The REEFS Silicone flexible parts tray is designed to keep your hardware and parts sorted and secure while you are working on your R/C project. FEATURES:6 small and 1 large pocket for hardware...

The REEFS Silicone flexible parts tray is designed to keep your hardware and parts sorted and secure while you are working on your R/C project. FEATURES:6 small and 1 large pocket for hardware...

This is the Variable Winch Mount for Vanquish® VRD™The Variable Winch mount is one single mount that allows you to mount a LoPro Winch, Internal Spool Winch, or Micro sized servo winch!Note: Does not...

MALE TO FEMALE XT90Two extended Female JST(2) Included Male to MaleJST Adapters 

MALE TO FEMALE XT60Two extended Female JST(2) Included Male to MaleJST Adapters 

High Torque High Speed Brushless SERVO or WINCH- Comes as SERVO out of the Box, can be changed to WINCH with the REEFS LINK and Software.- BUILT IN PREPROGRAMMED WINCH CONTROLLER SUBMARINE...

High Torque High Speed Brushless SERVO or WINCH- Comes as SERVO out of the Box, can be changed to WINCH with the REEFS LINK and Software.- BUILT IN PREPROGRAMMED WINCH CONTROLLER- SUBMARINE...

FEATURES:REEFS Machined Aluminum - - Anodized Black FinishSPECIFICATIONS:29.7 mm L / 10.8 mm H - - 2 Position Holes - - Single Clamping

800 IS Internal Spool Low Pro High Torque High Speed Brushless Servo w/ Built in Winch Controller Features:SUBMARINE WATERPROOF: 6 Point SealsInternal Machined Spool w/ Coated FinishApprox 6ft ...

Features:25mm Wide / Roll Size: 55mm Diameter1mm ThickUltimate adhesion, easy peel off1"W x 108"L

Features:4 Driver Bits (4.0, 5.5, 7.0, 8.0)5mm Hex Top

Features:5 PC Hex Bits (.05, 1.5, 2.0, 2.5, 3.0)5mm Hex Top

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

- RedCat Rock Sliders for Gen8 - Hardened 16 Gauge Steel- Laser Cut & Powder Coated Black- Open screw slot for adjust-ability

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

Hardened Steel car stand w/ shock holes. 

.

- REEFS Machined 7075 Aluminum Low Profile Spool- Anodized Clear-4Ft Silicone Coated Steel Braided Line- Scale Recovery Hook & Hardware

WARNING: DOES NOT FIT OUR 299LP WINCH, ONLY OUR 422WINCH- Machined 7075 Aluminum- Pre-Tapped holes - Anodized Black- Weight 2oz

Magnetic HEX driver wrench insert- Grade A2 Steel - 1/4 Inch Adaptor- 1.5, 2.0, 2.5, 3.0mm

High Speed High Torque Brushless ServoWATERPROOF : Voltage 4.8-8.4Internal: Steel Gears / All CNC Aluminum CasingBearing Type: 2BB / Weight: 2.0oz / Dimension: 1.6 x .79 x 1.0 (LWH)Torque: 278oz @ 6...

7075 Hard Anodized Aluminum Kit - (2) Solid Aluminum Arms - (2) Links - (1) Hardend Sway Rod - (4) Rod ends w/ Pivot Balls - (2) 3mm Set Screws - (2) Rod Spacers - (4) Screws - (4) Nuts - (4)...

7075 Hard Anodized Aluminum Kit - (2) Solid Aluminum Arms - (2) Links - (1) Hardend Sway Rod - (4) Rod ends w/ Pivot Balls - (2) 3mm Set Screws - (2) Rod Spacers - (4) Screws - (4) Nuts - (4)...

25T Spline- 7075 Aircraft Grade Aluminum- REEFS Machined Shield Design- Anodized Black Finish- 1.81” Inch Long- 46.1 mm Long- 2 Position Holes on each side- Double Clamping

- 25T Spline- 7075 Aircraft Grade Aluminum- REEFS Machined Shield Design- Anodized Black Finish- 2.5” Inch Long- 65 mm Long- 3 Position Holes- Clamping Top

25T Spline- 7075 Aircraft Grade Aluminum- REEFS Machined Shield Design- Anodized Black Finish- 3.3” Inch Long- 84.24 mm Long- 2 Position Holes on each side- Double Clamping

PREMIUM VERSION OF THE 300 ALACRITOUS ON THE REDCAT 64 IMPALA RCRACING / DRIFT / ONROAD / AIRHigh Speed Brushless ServoWater Resistant: 7 Point SealsFully Programmable w/ REEFS SoftwareREEFS LINK...

New REEF Shield V2 HD Horns. Made from hardened aluminum. 25T Spline. 3 Position, double clamping. Strong and rigorously tested. Total Length 29.7mm. Includes hardware. Available in Black and Gray.

New REEF Shield V2 HD Horns. Made from hardened aluminum. 25T Spline. 3 Position, double clamping. Strong and rigorously tested. Total Length 29.7mm. Includes hardware. Available in Black and Gray.

The Triple4 Smart Winch can be used as a Winch or Steering servo!Switch from Winch to Steering servo with a couple clicks on our REEFS Software! Fully ProgrammableHigh Torque High SpeedBrushless...

.

.

3s Lipo Connector- Battery Balance Port to JST

2s Lipo Connector- Battery Balance Port to JST

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

NOTE: Holes for screws made so screw is flush, not sunk in.Made from a one piece block of aircraft grade aluminum.  Fits most servos, I've tested on these:REEFS 422HD, Triple4, Triple5,...

This machined aluminum fairlead is a direct bolt-on accessory to the Element Sendero and other 1/10 scalers and crawlers.

7ft Synthetic DSM Off-Road Winch Line- 1mm thick - 8 Strand Dyneema- 250LB Rated- Laser cut Steel Hook

Contained in an aluminum servo case is a powerful winch and integrated controller for simple and convenient operation from a 3rd channel. In fact, it drops into the Element chassis (as well as many...

Made from a one piece block of aircraft grade aluminum. CNC Precision in the USA. Fits most servos.Recommended servos: REEFS 422HD, Triple4, Triple5, Savox1230, HiTec 7950TH

High Torque High Speed - Digital Brushless Servo  Internal: Titanium & Aluminum GearsAluminum Center / Plastic Top/Bottom (Replaceable parts available)Bearing Type: 2BBWeight: 2...

REEFS Servo Shield RAW  NOTE: Holes for screws made so screw is flush, not sunk in. Made from a one piece block of aircraft grade aluminum. CNC Precision in the USA. Fits most servos,...