Spaz Stix Color Change Aerosol Spray Paint Holographic 3.5oz Can

Not sure what color to paint your vehicle? Spaz Stix Color Changing paint is the perfect solution.

Our lacquer based paint offers that “chameleon effect” which brings out a new color at every angle. When used in natural sunlight the colors are shifted even more than normal! Try our most popular color change in airbrush or aerosol paints including Holographic, Green / Purple / Teal and Gold to Red.

Detailed Instructions:

Use Spaz Stix Pre-Prep #SZX90059 before painting to keep paint jobs- swirl and fingerprint free.

Spaz Stix Change Color paint's will appear lightly colored at first and build in intensity with additional coats. To optimize Color Change effects for interior plastic applications apply 2-3 light coats of Spaz Stix Black/Backer (SZX00119) behind the Color Change paint. For exterior applications, spray Spaz Stix Black/Backer first, and then spray Color Change paint over it. Then seal and protect with Spaz Stix #SZX90109 Clear Coat.

1. Allow can to warm to room temperature, then shake for one minute.

2. Hold can 8" to 10" from surface while spraying in an even, consistent spray pattern.

3. Occasionally shake can in an up-down motion during use.

4. When finished painting, clean valve by holding can upside down while spraying for two seconds. Wipe residue away from spray tip.

5. Allow at least 20 minutes dry time before any additional applications.

6. Always test on a scrap surface first.

Suggested Backer Color: SZX00119 High Gloss Black Backer 3.5oz Aerosol