TCS

This motherboard is designed to replace the original lighting board in Bachmann steam engines including the 4-6-0. Included on this motherboard is a KA3 Keep Alive® for smooth operation over...

This motherboard is designed to replace the original lighting board in Bachmann steam engines including the K4 steam. Included on this motherboard is a KA3 Keep Alive® for smooth operation over...

This motherboard is specifically designed to replace the original lighting board in the Walthers Mainline GE ES44 "GEVo" diesel locomotive. Included on this motherboard is a KA2 Keep-Alive™ for...

This motherboard is designed to replace the original lighting board in Atlas and Kato diesel locomotives. Included with this motherboard is a KA4 Keep Alive® for smooth operation over troublesome...

This motherboard is designed to replace the original lighting board in Atlas and Kato diesel locomotives. Included with this motherboard is a KA4 Keep Alive® for smooth operation over troublesome...

This motherboard is designed to replace the original lighting board in Atlas and Kato diesel locomotives. Included on this motherboard is a KA2 Keep Alive® for smooth operation over troublesome...

This motherboard is designed to replace the DCC decoder found in DCC equipped Intermountain and Bowser diesel locomotives. Created to fit the Intermountain SD40-2 as well as the Bowser C-636, the...

This motherboard is designed to replace the DCC decoder found in DCC equipped Intermountain and Bowser diesel locomotives. Created to fit the Intermountain ES44 as well as the Bowser S12, the IB-MB1...

This motherboard is designed to replace the original lighting board in Intermountain and Bowser diesel locomotives. Created to fit the Intermountain SD40-2 as well as the Bowser C-636, the IB-MB2...

This motherboard is designed to replace the original lighting board in Intermountain and Bowser diesel locomotives. Created to fit the Intermountain ES44 as well as the Bowser S12, the IB-MB1 will...

This product is used with the LT-50 "Layout Throttle." This panel can be used to create a DCC track output when used with an LT-50 using the specified jack. A single additional wired LCC throttle can...

The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and easy way to...

TCS Keep Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The WAX-KA3 will power an HO-Scale locomotive with...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The WAUX-KA4 will power an HO-Scale locomotive with...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the size of a...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the size of a...

The AZL1D4 is the first drop-in decoder designed for the latest generation of American Z Line diesel locomotives. The design features a screw-down design, unlike previous designs which relied on...

The K6D4 decoder is specifically designed to operate the Kato N-Scale FEF-3 4-8-4 steam locomotive. Note: This decoder features a specialized motor control algorithm for use with the core-less...

The IMFP4-NF is a N-scale drop-in decoder which is designed for InterMountain FPA-unit locomotives. Examples include the following: InterMountain:FP7AFP9A See the installation pages for a...

The IMF4-NF is a N-scale drop-in decoder which is designed for InterMountain F-unit locomotives. Examples include the following: InterMountain:F3A/BF7A/BF9B See the installation pages for a...

This full-featured, 4 function, drop-in decoder is designed to fit in American Z Lines modern diesel chassis. Some of the AZL locomotive it fits in includes: SD70, SD70M, SD75I, SD75M, GP9, GP38-2...

The MT1500 is a N-scale drop-in decoder which was designed specifically to fit in the Micro-Trains Line SW1500 diesel switcher. The decoder features a built-in forward headlight, and support for one...

This device is designed to measure the scale speed of locomotives or train cars that past by it. Two small light sensors mounted discretely between the ties are used to record the speed of anything...

This motherboard is designed to replace the existing circuit board in a Bachmann Baldwin 2-8-2. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® (KA2...

This motherboard is designed to replace the existing circuit board in a Bachmann Heavy 4-8-2. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® (KA2...

This motherboard is designed to replace the existing circuit board in a Bachmann Light 4-8-2 (short tender) or the 2-8-0. This board provides an onboard Keep Alive® for uninterrupted performance over...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed to receive a WOW121 or EU621 decoder and provides an...

The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any...

The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any...

The WOW101 is a universal sound decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any...

The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into...

A full featured, 4 function, 3.5" (88.9mm) harnessed decoder with a built in Keep-Alive™. The built-in Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad...

This hardwire decoder is the smallest decoder with built in Keep-Alive™ that we produce. It will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor...

The Analog Filter 1 (AF1) is used to filter the DC signal leaving the power pack. This filter pack corrects flickering in lighting effects and low-speed auto-reversing. Only one AF1 is required to...

The T4-LED has added Blue and Black/White wires for the use of a KeepAlive device. The T4-LED is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato:ALCO PA-1E5AE6AE8AE9A See the Installation Pages for a full list of compatible...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is...

This decoder is a T4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the size of a...

This full featured 8 function BEMF decoder is designed for the HO Scale LifeLike Proto 2000 Series. Included is our auto-adjusting BEMF for outstanding slow speed performance and hassle free set up...

This full featured BEMF decoder with 8 available functions is designed for the LifeLike Proto 2000 HO-Scale locomotives. This decoder has a built in voltage dropping circuit for the front and reverse...

This full featured BEMF decoder with 8 available functions is designed for the LifeLike Proto 2000 HO-Scale locomotives. This decoder has a built in voltage dropping circuit for the front and reverse...

The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

This full featured, 2 function, Direct Plug decoder is designed to easily plug into a vast array of locomotives with 8Pin NMRA Sockets. The 8-Pin NMRA plug built directly into this decoder is rotated...

This full featured, 2 function, Direct Plug decoder is designed to easily plug into a vast array of locomotives with 8Pin NMRA Sockets. The 8-Pin NMRA plug built directly into this decoder make...

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and...

The K4D6 is a N-scale drop-in decoder specifically designed to fit the Kato N-Scale MP36PH locomotive. This decoder is also commonly paired with the K4-LK lighting kit for the MP36PH. Note: The...

The L1D4 is a N-scale drop-in decoder which has been designed for Life Like and Walthers Proto locomotives. Examples include the following: Life Like:GP20GP60 Walthers...

This full featured, 2 function, Direct Plug decoder fits the Life Like FA1 as well as other Life Like locomotives with a headlight and a seperate mars light. Included is our auto-adjusting BEMF for...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 90 degrees from the standard orientation. This allows...

This M4 decoder (see M4 for more information) comes connected to a 5" (12.7 cm) long harness which is terminated with a 8-Pin NMRA plug.

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 180 degrees from the standard orientation. This...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug.

This M1 decoder (see M1 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 90 degrees from the standard orientation. This allows...

1388 M1P-5" 2-Function Hard-Wire Decoder for HO Scale Locomotives

This M1 decoder (see M1 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 180 degrees from the standard orientation. This...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-18 is wired to a 18mm harness terminated in a 6-pin NEM...

Dimensions (L x W x H): .51” x 0.27” x 0.11” or 12.95mm x 6.9mm x 2.79mmScale: Z ScaleContinuous/Peak: 1.0/2.0 AmpTotal Functions: 2Function Rating: 60 mA12V Outputs: 2This full featured 2 function...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato:F40PH See the installation pages for a full list of compatible engines! Note: The K0D8...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato:F3AF7A See the installation pages for a full list of compatible engines! Note: The K0D8...

The IMFTB4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTB locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance...

The IMFTA4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTA locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance...

The IMFP4 is a N-scale drop-in decoder which is designed for InterMountain FPA-unit locomotives. Examples include the following: InterMountain:FP7AFP9A See the installation pages for a full...

The IMF4 is a N-scale drop-in decoder which is designed for InterMountain F-unit locomotives. Examples include the following: InterMountain:F3A/BF7A/BF9B See the installation pages for a...

The K1D4 is a N-scale drop-in decoder designed for Kato and Athearn locomotives. Examples include the following: Kato:SD70ACeSD40-2GG1 Athearn:SD75I See the Installation Pages for a...

The full featured, 8 function, hard-wire, G-Scale decoder is tough enough to provide power for large engines, yet capable of creeping at ultra-slow speed due to the excellent TCS auto-adjusting BEMF...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our...

The K2D4 is a N-scale drop-in decoder designed for Kato and Walthers locomotives. Examples include the following: Kato:RS2/RSC2SD80/SD90MAC Walthers:RS2GP18 See the installation pages...

The DP2X-UK is a HO-Scale direct-plug decoder designed for engines equipped with 8-pin NMRA (NEM652) sockets. By far one of the easiest decoders to install, the DP2X-UK can be plugged into many...

The CN-GP is a N-scale drop-in decoder for Atlas, Kato, and Life Like locomotives. Examples include the following: Atlas:GP7/GP9GP30/GP40/GP60 Kato:SD40 Life Like:GP18GP60 See the...

The ASD4 is a N-scale drop-in decoder for Atlas locomotives. Examples include the following:Atlas:GP7/GP9GP15GP30GP35See the installation pages for a full list of compatible engines!Back EMF Load...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas:GP7/GP9 Old StyleGP30/GP35 Old...

Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs. To use the VR1.5, connect the Blue wire to the...

The MP-15N is a N-scale drop-in decoder which is designed for the Atlas MP-15 locomotive. See the installation pages for a full list of compatible engines! Back EMF Load Compensation:...

The MC4 is a 4-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC4 is designed for use in locomotives where a T-series or M-Series decoder is too large, and more than 2...

The MC2 is a 2-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC2 is designed for use in locomotives where a T-series or M-Series decoder is too large. This decoder may be...

The M4 is a small form factor hard-wire decoder with 4 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited. This decoder is...

The M1 is a small form factor hard-wire decoder with 2 lighting functions for HO-scale and N-scale installations. This decoder is designed for installations where space is limited. This decoder...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights. Note:...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These decoders are...

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the...