Decoders and Accessories

Zen Blue+ Decoder: 8 Pin NANO Direct – 4 FunctionZen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with super-advanced brown-out protection and nano size.All of our decoders are...

Zen Blue+ Decoder: 8 Pin NANO Wired 2 FunctionZen NANO 8 Pin Wired 2 Function w/Stay Alive connection.The ZN8H.nano is remarkably small! We started off with the world’s smallest, then shrunk it even more! With the same footprint as NANO 8-pin direct, we...

Zen Blue+ Decoder: Super-Small Next18 Direct Decoder – 4 FunctionZen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with super-advanced brown-out protection and nano size.All of our...

Features:DH165K1A fits many Kato HO Diesel Locomotives.Compatible with Digitrax Sound BugDecoder Lock equippedSpecificationsCurrent Rating-Motor1.25 Amp (2.0 Amps Peak)Size2.877” x .667” x .173” (73.07mm x 16.93mm x4.4mm)InstallationBoard...

Digitrax LocoMotion™ SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent operation.128 Speed Step operation (14 or 28 steps can also be...

Features: Series 3 HO Plug ‘N Play Decoders with Integrated PlugCompatible with Sound Bug (Note this is not a plug n' play installation, wiring is required) Decoder Lock equipped SpecificationsCurrent Rating-Motor: 1.5 Amp (2.0 Amps Peak)Size: .67”...

Features:Series 3 Decoder for Proto 2000 Plug ‘N Play InstallationCompatible with Sound BugDecoder Lock equippedSpecificationsCurrent Rating-Motor1.5 Amp (2.0 Amps Peak)Size.67” x 1.05” x 0.25” (17.02mm x 26.67mm x 6.35mm)InstallationPlug ‘N Play for...

Features:DH165Q1 fits Atlas, Intermountain, LifeLike & Other factory sound-equipped HO Locomotives.Compatible with Digitrax Sound Bug.Decoder Lock equippedQSI-style PCB replacement Plug N’Play decoder-Allows replacement with new technology...

For use with Digitrax Decoders Equipped with 6 pin Function Harness8 ohm 16 x 26 x 9 mm box speaker includedKeeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track PowerHold up...

For use with Digitrax Decoders Equipped with 6 pin Function Harness8 ohm 10x18 mm Oval speaker included.Keeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track PowerHold up time...

Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10 pin sound harnesses such as SDH166D...

Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 6 pin sound harnesses such as SDN136PS...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak charging...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA3, the KA1 will power HO or N scale...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA4, the KA2 will power HO or N scale...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA4, the KA2 will power HO or N scale...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. This Keep-Alive® includes a 2-Pin Quick Connector Harness for plugging into decoders with a compatible...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak charging...

Product InformationWalthers SceneMaster 40' 1970s-style Trailmobile Dry Van 2-Packs are a great addition to vintage trailer-on-flatcar (TOFC) service and period HO highways from the 1970s to the 1980s. Fully assembled and ready for service, each includes...

Product InformationWalthers SceneMaster 40' 1970s-style Trailmobile Dry Van 2-Packs are a great addition to vintage trailer-on-flatcar (TOFC) service and period HO highways from the 1970s to the 1980s. Fully assembled and ready for service, each includes...

HO-scale, 4-function decoder that measures 25 x 16 x 6mm with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models. This decoder will operate in both DC and DCC.Dimensions: 25 x 16 x 6mmMax. Motor Stall Current:...

Fits Kato, Athearn Genesis, Stewart, other HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

Fits many Kato HO legacy locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

D13J Decoder - new smaller replacement for D13SRJ Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC “Quick Plug” Silent Running,torque compensated...

Z/N-scale, 2-function decoder that measures 13 x 9 x 3mm and is available with a 6-pin NEM651 connector popular in many European models. This decoder will operate in DCC only.Dimensions: 13 x 9 x 3mmMax. Motor Stall Current: 1A Max. Function...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA3 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending...

Fits many 21MT equipped HO locomotivesDigitrax 21-pin MT socket1.0 Amp/2 Amps Peak2 FX7 Functions, 300ma Output

Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion MachinesDS52 Features:Simple hook up and set up.Control 2 individual turnout machines.2 Slow motion turnout machines, such as Tortoise™ by Circuitron or Switchmaster™.OR2 Solenoid type...

Fits Many Z, N and HO Scale Locomotives    Size: .455” x .369” x .126”    11.56mm x 9.37mm x 3.2mm    Z, N and HO Scale    1.0 Amp/1.5 Amps Peak    2 FX3 Functions, 0.5...

For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connectionsKeeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track PowerHold up time varies based on...

For use with Digitrax Decoders Equipped with 6 pin Function HarnessKeeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track PowerHold up time varies based on actual decoder load...

Keeps locos & sound running during power interruptions caused by dirty or bad track.Hold up time varies based on decoder load & track conditions.PX112-2 Plug ‘N Play Install on DH126 & DH166 Series DecodersPX Body Size 1.575” x 0.547” x 0...

Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on decoder load & track conditions. Use with...

Product InformationDetail highways, loading and shipping docks, piggyback flats and terminals, and more in minutes with these 35' Fluted-Side Trailer Two-Packs from Walthers SceneMaster. Highly detailed and finished in colorful period paint and lettering...

You'll have the right tool for the job with the Walthers Tap Holder on your workbench! Designed to comfortably hold Taps (947-1301 to 1304 sold separately) so you can easily cut threads in soft metals and plastics for a variety of common hobby screw...

Now its easy to add UPS(R) service to your HO layout with this exciting series of officially licensed replicas from Walthers that includes Cornerstone structure kits, SceneMaster vehicles and figures!

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and P-HarnessMedium Plug with approximately.3.2" wires1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and PS-HarnessMedium Plug with approximately.1.2" wires1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!             Torque Compensation for smooth as silk...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker enclosure with this speaker for maximum sound output.

N scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used as a basic N scale signal...

Add realistic detail to railroad and highway rights-of-way in minutes with this easy to build Cornerstone Concrete Culverts kit. The prototypes divert and direct water away from overhead embankments, and have been in use for decades. Other features of...

Walthers Hex Wrench Set is a must-have tool that can be used as a socket or driver and makes quick work of loosening and tightening standard sizes of hex nuts and hex head screws (available from Walthers), as found on locomotives and other models. With...

DescriptionThis vehicle is modeled after big equipment at logging facilities and handles large loads to save a lot of manpower. Set it near a logging operation for a realistic look.

Line O Scale Double Crossbar Pre-Wired Poles alongside railroad tracks to model telephone poles used for communication on the railroad. They are hand-painted and feature weathered wood poles, guy wires and other authentic details. Pre-Wired Poles can be...

HO-scale, 4-function decoder that measures 74 x 17 x 3mm designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both...

In kit form. Assembly required.

Fits Many N/HO Locomotives with 8 pin Medium Socket    Size: .55” x .404” x .2”    13.9mm x 10.3mm x 5 mm    N/HO Scale    Digitrax Easy Connect 8 Pin Harness    1.0 Amp/1.5 Amps...

Fits Many Z, N and HO Scale Locomotives    Size: .455” x .369” x .126”    11.56mm x 9.37mm x 3.2mm    Z/N/HO Scale    1.0 Amp/1.5 Amps Peak    2 FX3 Functions, 0.5 Amp...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These decoders are commonly used for smoke coils. Note: FL-series...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights. Note: FL-series decoders do not provide motor control. A...

The Analog Filter 1 (AF1) is used to filter the DC signal leaving the power pack. This filter pack corrects flickering in lighting effects and low-speed auto-reversing. Only one AF1 is required to smooth out the operation of all of the locomotives being...

HO-scale, 4-function decoder that measures 25.1 x 15.6 x 4.7mm. This decoder has a 21-pin connector arranged according to the NMRA Standard that easily plugs into the factory-installed PCB of many models. This decoder will operate in DCC only.Dimensions:...

THOMAS & FRIENDS™ BERTIE THE BUS. Bertie and Thomas have been the strongest of friends ever since their Great Race. Bertie is a friendly bus who is always ready to help any engine, as long as they're prepared to admit roads are sometimes just as...

Wired Motor & Function Decoder that fits many N and HO Scale Locos.    Size: .55” x .404” x .2”    13.9mm x 10.3mm x 5 mm    N/HO Scale    1.0 Amp/1.5 Amps Peak    3 FX3...

Expand container traffic on your 1960s and 70s era HO layout with these two-packs of 20' SceneMaster containers! Based on equipment used by Railway Express Agency (REA), they were equipped with both standard end doors, as well as a single side-door to...

Expand container traffic on your 1960s and 70s era HO layout with these two-packs of 20' SceneMaster containers! Based on equipment used by Railway Express Agency (REA), they were equipped with both standard end doors, as well as a single side-door to...

Fits many HO locomotivesDigitrax 9-Pin Harness Socket1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Features:Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion® System makes them run like the real thing, too!    Torque Compensation for smooth as silk silent operation.    128 Speed...

TF4 Quad DCC Function Decoder with Integrated TransponderFour 125mA (250mA peak) function output for lights or other functionsFunctions can be turned on/off using F0-F12Supports both 2 digit and 4 digit addressingProgrammable from DCC compatible...

HO-scale, 2-function decoder that measures 17 x 17 x 7mm in a plug-and-play format suitable for use with a variety of models. It is manufactured with an NMRA compatible 8-pin ‘direct-plug.' This decoder will operate in DCC only.Dimensions: 17 x 17 x...

* Licensed Replica of Popular International Bus * Must-Have for HO Model Railroads * Perfect Size for Collectors * Positionable Parts on Many Models * Fully Assembled & Painted * Die Cast Metal & Plastic Parts Get the kids to school safe and...

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm BROWNCore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm YELLOWCore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm GREENCore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm GREYCore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm ORANGECore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm REDCore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

200 Meter thin and flexible locdecoder electrical wire AWG30 0,21mm / 0,58mm REDCore type: single-wireCore diameter: 0,21mmCore Area: 0,04mm2Core material: Tinned copper wireWire diameter: 0,58mm

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Lets you run locos as DC or DCCFor DC only operation use the dummy plug with either DNWH or DNWHPSFor DCC operation remove the DNDP and replace with a decoder5-Pack

The BSM-2 Switch Controller from TCS is a single-output switch controller designed for two turnouts simultaneously, such as single-crossovers. This decoder can be found in current-generation DCC E-Z Track® from Bachmann Trains Inc. The decoder can be...

Adding essential details to your steam- or transition-era layout will be fast and fun with the Vintage Trackside Details Kit from SceneMaster! Typical of equipment used by railroads large and small to control signals at crossings, junctions and more, the...

Line N Scale Double Crossbar Pre-Wired Poles alongside railroad tracks to model telephone poles used for communication on the railroad. They are hand-painted and feature weathered wood poles, guy wires and other authentic details. Pre-Wired Poles can be...

Line HO Scale Double Crossbar Pre-Wired Poles alongside railroad tracks to model telephone poles used for communication on the railroad. They are hand-painted and feature weathered wood poles, guy wires and other authentic details. Pre-Wired Poles can be...

Place O Scale Single Crossbar Pre-Wired Poles down city streets to model power poles and give your layout an added layer of realism in minutes. Loaded with details, Pre-Wired Poles are easy to install. Simply drill holes, then slide the poles and plant...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires...

Product InformationAt the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans! Based on contemporary designs used by all kinds of businesses big and small, you'll also find them in the ranks of...

Product InformationAt the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans! Based on contemporary designs used by all kinds of businesses big and small, you'll also find them in the ranks of...

This SceneMaster(TM) kit makes it easy to to model sheet steel piling (SSP) retaining walls in HO scale. A must-have detail for modern waterfronts and construction sites, the kit includes add-on concrete walkways, bollards and dock cleats for harbor...

DescriptionUse this service truck to haul just about anything. This truck, with the Purina Mills sideboards, would look great sitting in a field, by a grain elevator or near a barn.

DescriptionOld county roads are the perfect place to set this vehicle on your layout. Don't forget to show it with an operator, pushing a pile of dirt.

DescriptionThis tractor could pull hundreds of times its weight in equipment. Set it on your layout by a factory or mill, or in a logging facility with logs on the back.

This is the HO Scale Hexagon Sidewalkfrom Proses Model Railway Accessories by Bachamnn.Suitable for Ages 14 & Older.FEATURES2 piecesINCLUDESHO Scale Hexagon SidewalkREQUIREMENTSAssemblySPECIFICATIONSScale: HO 1/87Dimensions: 25mm wide x 1.5...

Your TL1 can be used as:1. Function only DCC decoder with transponding2. Digitrax Transponder3. Function only DCC decoder without transponding.Single 125mA (250mA peak) function output for lights or other functionsFunction can be turned on/off using F0,...

DescriptionThis tanker models trucks that hauled water, fuel, fertilizers or other liquid products. It would look great pulled up to a tower, filling up with water.

.

With hundreds of hobby and household uses, the Walthers Double Ended Pin Vise belongs in every tool box! Made especially to hold smaller jeweler's or wire gauge drill bits (sold separately) in sizes 42 to 80, it's made of durable metal for years of...

This is the HO Scale Laser-Cut Billboard Kitfrom Proses Model Railway Accessories by Bachamnn.Suitable for Ages 14 & Older.FEATURES4 packINCLUDESHO Scale Laser-Cut Billboard KitREQUIREMENTSAssemblySPECIFICATIONSScale: HO 1/87

Decoder Wire for decoder, lighting & signal installation 90ft 30AWG stranded wire-10 ft lengths in 9 colors

Add a coiled cord to your LocoNet Throttle without soldering! Just plug the modular adapter provided on to your existing Throttle plug and add the coiled cord.   Specifications For Use With All Digitrax Throttles

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA-N1 can power an N-scale locomotive for 1-2 seconds over dirty track and power interruptions...

The BSM-1 Accessory Decoder from TCS is a single-output switch controller designed for single turnouts, including wyes. This decoder can be found in current-generation DCC E-Z Track® from Bachmann Trains Inc. The decoder can be installed as a drop-in...

Walthers SceneMaster HO Scale Industrial Dumpsters are must-have details for modern industrial parks, factories, warehouses and as truck loads. Easy-to-assemble plastic parts come molded in colors. The Industrial Dumpsters set includes eight dumpsters in...

Create custom signs for your layout. Easy-to-build, plastic kit includes parts for three billboard frames with nonworking light fixtures. Use with signs from Walthers Reference Books and structure kits, decals, or other manufacturer's signs.

 Full-Color Vintage Roadside Signs  * Parts for Three Complete Billboards with Nonworking Lights  * Easy to Assemble

Product InformationAdd life to your HO layout with SceneMaster(TM) vehicles featuring:Licensed replica of popular International(R) trucksMust-have for HO model railroadsPerfect size for collectorsPositionable parts on many modelsFully assembled &...

This adapter allows you to use our smallest decoder (The TSU-N18) in practically any n-scale model! Bring the TSU-N18's 6 functions plus a narrower profile to your models. The JST-Next18 Adapter features a Next18 socket to simply plug-in your TSU-N18...