Speakers / Electronics / Wires

Everything you need to get started with Advanced Digitrax Command Control.Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.It offers excellent speed control, prototypical consisting, the full range...

Command Station Only. No track Power Booster.FYI: Not for use with the Power CabContents included with CS03:One 2-pin plug for the programming trackOne 7 foot 4 wire Control Bus cableOne P118 Power supplySystem reference manual that can be found

The B-106 is an intelligently-designed DCC Auxiliary Booster with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the B-106 is the perfect for layout builders or renovators looking for a...

The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the buttons, the LT-50 is the perfect DCC command station...

Engineer cab with LED display, uses a digital encoder which allows flexibility when controlling multiple locomotives at different speeds. Clear, easy-to-read display, select up to 6 loco recalls, F0-F28, select accessory, select macro. Radio equipped

D13W Decoder - New Smaller Replacement for D13SRDimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mmSilent Running Torque Compensated Motor DriveTorque Compensation for Ultra Smooth Low Speed PerformanceMotor Rating 3/4 Amp Continuous, 1.2 Amp...

DescriptionEnjoy a brand new way to operate your UNITRACK layout - your phone or tablet! Using the Kato Smart Controller, take control of your trains with hands-free throttle operation using your smart device’s Bluetooth connection. Better still - when...

DB210-OPTO Single 3/5/8 Amp AutoReversing DCC Booster that is Opto-Isolated for layouts with common rail wiringSingle 3/5/8 Amp AutoReversing DCC Booster (no command station capability)Up to 8 Amps of power totalOpto-Isolated for layouts with common rail...

Works with compatible LocoNet SystemsCompact size for easy one-handed operationColor 1.5” LCD Display ScreenFull numeric keys for easy locomotive selectionFine speed control with encoder knobForward/Reverse toggle switch with brakingOn/Off Switch, uses...

This device is designed to measure the scale speed of locomotives or train cars that past by it. Two small light sensors mounted discretely between the ties are used to record the speed of anything passing over them and then the device calculates and...

Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A phone with the Withrottle or Engine Driver app can also be used. Connect the...

Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A phone with the Withrottle or Engine Driver app can also be used. SPECSWorks...

Not all days on the railroad are sunny! Activate realistic driving RAIN and WIND SOUNDS with LIGHTNING that strobes with dramatic effect and THUNDER claps that shake the room -- All the with the push of a button!THIS KIT INCLUDES:- 2 High-Brite Multi-LED...

Get started in the snap-fit E-Z Track® system with the Nickel Silver E-Z Track® Oval. Comes with 12 pieces of 18" radius curved track, three pieces of straight track, one straight terminal retailer, and a standard DC speed controller. All you need now is...

UR93 Features:Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).More than double the radio range of UR92 Duplex units.Improved multi-path performance for cluttered layouts.Plug and Play setup, PS14 Universal power supply...

Works with compatible LocoNet SystemsCompact size for easy one-handed operationColor 1.5” LCD Display ScreenFull numeric keys for easy locomotive selectionFine speed control with encoder knobForward/Reverse toggle switch with brakingOn/Off Switch, uses...

Cobalt Classic Ω Turnout MotorSix Cobalt Classic Ω Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.Suitable for all gauges from large to very small, we even have an...

The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically without having to press any buttons. The PR4 is electrically...

Complete set to expand or upgrade a layout, optimal wiring for five amp and lower power systems, and connections can be easily disconnected for trouble-shooting.  Includes Main Bus (50' each red and black 14 AWG stranded wire), Feeder Wires (16...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page.Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and...

.

This feedback module with 16 integrated occupancy indicators is designed for the 3rail AC system. The module comprises 16 indication points with a double common connection. The network connections allow the modules to be placed up to 10 metres from each...

Multi-Color Pack of 10 foot lengths of our custom made 32 gauge wire in the following colors: Red, Black, Orange, Grey, White, Yellow, Blue, Purple, and Green.TCS is the leading supplier of the highest quality, most flexible wire in the industry! Not...

.

Simplifies hookup, maintenance and troubleshooting of LocoNet.All connections plug-detachable.One RJ12 Throttle Jacks in front panel.IR and NET Indicator LEDsTwo RJ12 LocoNet Jacks in rear for connection to other LocoNet devices.Use with 6 conductor...

MS100 RS232 Computer Interface for connecting LocoNet to your IBM compatible PC.The MS100 Computer Interface is designed to let a computer with an IBM compatible COM, or RS232 communications port, monitor Digitrax LocoNet.Application software running in...

The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there.RX4 Features:Know the layout zone location of...

The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and easy way to “plug and play” command stations and boosters. Whether...

.

Available with an eight pin plug in. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

Kato 22-015, Pocket Line Controller for Kato's Pocket Line Series Items *This controller does NOT include a regular plug to plug into the wall. Power is supplied to the controller by using a USB Type-C cable and USB power adapter (Sold Separately,...

Available with a wire harness. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

 Add Push Buttons or Toggle switches to a Switch8 Mark2For Use w/Switch8-MK2 Switch Machine Decoder #524-151

This light set is specially designed for all ROCO (c) BR189 models in H0 scale. This light set is very easy to install and provides your model with the right lighting. The kit uses the latest LED techology to replace the incandescant bulbs in your BR189...

This product is used with the LT-50 "Layout Throttle." This panel can be used to create a DCC track output when used with an LT-50 using the specified jack. A single additional wired LCC throttle can be connected to the front of the panel, and this panel...

AND-24 Anderson Power Poles 24 Pack 12 each Red / Black

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is brought to life. Finally there is a solution that brings...

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is brought to life. Finally there is a solution that brings...

NCE NHI-MED Medium Size "No Halt" Add On ModuleHigh Power Version for Larger LocomotivesEliminates or Reduces the Following Due to Dirty Track or Unwired Switchfrogs:• Stalling• Sound interruption• Light flicker

Alpha Mimic Add-On LEDs + leads (Red+White)This add-on pack for Alpha Mimic contains 24 LEDs, 6x extension cables and 3x 6-way adapters.

Alpha Mimic Add-On LEDs + leads (Red)This add-on pack for Alpha Mimic contains 24 LEDs, 6x extension cables and 3x 6-way adapters.

For use with Digitrax Decoders Equipped with 6 pin Function Harness8 ohm 10x18 mm Oval speaker included.Keeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track PowerHold up time...

This product is an expansion panel for an LCC network, such as those created and used by the CS-105 and LT-50. Use this product to expand the number of wired throttles such as the T-50 you can connect to the TCS command station, or to provide an access...

The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It...

Introducing the More Compact CurrentKeeperII!Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains...

Additional infrared receiver for use with Bachmann E-Z Command® Dynamis® Pro Box. Provides extended receiver coverage.

With these adapter PCBs you can switch common cathode signals with the standard common anode decoders. 1 pack consists of 4 PCBs.

This light set has been specially developed for the MAT54 from PIKO. This easily installed light set makes it possible to display the familiar inverted L sign.

LocoNet Layout Wiring Made Simple!Pre-made, pre-tested 50 foot LocoNet cable.Use on any LocoNet Layout.Use for long runs or divide into custom lengths using LocoNet Cable Maker Kit & RJ12 Plugs.SpecificationsFor Use WithAll Digitrax Layouts

HO scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used as a basic HO scale signal...

N scale Mainline Signaling Kit including:2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used as a basic N scale signal.Mounting board and hardware...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is...

Reporting MarkNONEScaleHOSub BrandATHEARN

Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring:Installs in minutes - instructions includedIndependent 800 ma 16VDC filtered power supplyIncludes adapter cord to connect...

.

.

This handy power supply is designed especially for use with all SceneMaster LED lights (each sold separately) and is fully assembled. Ready to install, it provides regulated power with 32W 16V output, and includes a barrel-type adapter/connector and...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is...

Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that...

DescriptionBring your layout to life with a Sequencing Light Hub. Add up to four Just Plug lights that individually sequence on and off. Includes dimmer and speed controls. Turn sequencing off to use as a Light Hub. Add an optional Auxiliary Switch for...

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is brought to life. Finally there is a solution that brings...

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is brought to life. Finally there is a solution that brings...

Brass double street lamps suitable for N-Track. Equipped with Warm White LED, resistor and connecting wire.Total height: 7.5cmTotal width: 3.1cm

Brass double street lamps suitable for H0-Track. Equipped with Warm White LED, resistor and connecting wire. Total height: 10cmTotal width: 1.5cm

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is brought to life. Finally there is a solution that brings...

The new DR110 LED strip is the successor to and a combination of the DR10 and DR280 LED strips. The new DR110 LED strip is 28 cm long and consists of two 14 cm segments. Both segments have their own power supply, making it possible to use one LED strip...

The new DR110 LED strip is the successor to and a combination of the DR10 and DR280 LED strips. The new DR110 LED strip is 28 cm long and consists of two 14 cm segments. Both segments have their own power supply, making it possible to use one LED strip...

2 pack of 16' LocoNet Cables.Convenient pre-made, pre-tested cables, ready to use on your layout.LocoNet Wiring is a snap with these cables. SpecificationsFor Use WithAll LocoNet Layouts

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is...

10 Pack Warm White T1 LEDsMake your locomotive lights sparkle!  Use these beautiful warm white LEDs to replace the harsh blue white LEDs that are sometimes shipped with locomotives.  Simply replace the LEDs inside your locomotives with these.

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the...

NCE Euro12-2 - 12 Circuit Eurostyle Term Strip - Package of 2. (14-24 AWG)

Our newest speaker is the Mini Cube 3. We just love the amazing sound that you can get out of this tiny speaker. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind! George has shown this speaker off in YouTube...

This is one of our largest speakers for use with the TSU-4400 in O-scale or larger models.Dimensions: 50 x 90 x37.5mm(D)Frequency Response: 230Hz - 20kHzPower: 2 Watts (Nominal) 5 Watts (Peak)Impedance: 8 Ohms

Brass street lamps suitable for H0-Track. Equipped with Warm White LED, resistor and connecting wire. Total height: 10.5cmTotal width: 3.5cm

Digitrax 9 pin to bare wire harnesses in 5 packs

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC "quick plug" equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (p.n. 810069) to create a universal-style decoder.Dimensions: 22.5 x 16 x 7.5mmSupport for...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG multi-strand 105/44 (.002" per strand) soft, bare copper wire...

Fascia mount Switch control device.Wire to DS74 input cable, or use DSXC4 for plug and play.Two color leds display current Switch state.Supplied with 3 wire control cable.

2 LT5 Tester ModulesFor use with BDL16 Series Boards, BD4N, and other products

2 LT5C Tester Modules.For use with BDL716, BDL16 Series Boards, BD4N, and other products.

Great sound for your train if you can fit this one in your model!Dimensions: 40 x 28.5 x 11.3mm(D)Frequency Response: 250Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

This is a great speaker for many HO and S-scale locomotives.Dimensions: 40 x 20 x 8mm(D)Frequency Response: 550Hz - 12kHzPower: 1 Watt (Nominal) 1.5 Watts (Peak) Impedance: 8 Ohms

This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium.Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 740Hz - 4kHzPower: 1 Watt (Nominal) 1.5 Watts (Peak)Impedance: 8 Ohms

This small oval speaker is ideal for narrow hood diesels.Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz - 13kHzPeak Power: 2 WattsImpedance: 8 Ohms

If you have more space, this speaker is great for larger models.Dimensions: 35 x 20 x 5.3mm(D)Frequency Response: 560Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms