Speakers / Electronics / Wires

Detail your HO power grid quickly and easily with this special nonworking wire from Cornerstone! Perfect for modeling high-tension electrical lines, the material stays flexible for easy installation,...

DescriptionBring your layout to life with a Sequencing Light Hub. Add up to four Just Plug lights that individually sequence on and off. Includes dimmer and speed controls. Turn sequencing off to use...

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is...

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is...

Brass double street lamps suitable for N-Track. Equipped with Warm White LED, resistor and connecting wire.Total height: 7.5cmTotal width: 3.1cm

Brass double street lamps suitable for H0-Track. Equipped with Warm White LED, resistor and connecting wire. Total height: 10cmTotal width: 1.5cm

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be...

This lighting installation kit really makes any carriage complete. The kit doesn?t just contain contacts, capacitors and mounting materials. 20 seated figures also ensure that every carriage is...

The new DR110 LED strip is the successor to and a combination of the DR10 and DR280 LED strips. The new DR110 LED strip is 28 cm long and consists of two 14 cm segments. Both segments have their own...

The new DR110 LED strip is the successor to and a combination of the DR10 and DR280 LED strips. The new DR110 LED strip is 28 cm long and consists of two 14 cm segments. Both segments have their own...

2 pack of 16' LocoNet Cables.Convenient pre-made, pre-tested cables, ready to use on your layout.LocoNet Wiring is a snap with these cables. SpecificationsFor Use WithAll LocoNet Layouts

Create a surprise with unexpected sound when using the Motion Sensor Trigger. Just wave your hand in front of a hidden Motion Sensor to draw attention to a scene as people walk by your layout or...

Mini Speakers are the perfect size to add to any layout, diorama, presentation or project. Despite their small size, they issue large volume for a wide range of tones. Easily conceal with the Grill...

10 Pack Warm White T1 LEDsMake your locomotive lights sparkle!  Use these beautiful warm white LEDs to replace the harsh blue white LEDs that are sometimes shipped with locomotives.  Simply replace...

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already...

NCE Euro12-2 - 12 Circuit Eurostyle Term Strip - Package of 2. (14-24 AWG)

Use this quick-disconnect harness assembly for separating the locomotive from the tender.

Our newest speaker is the Mini Cube 3. We just love the amazing sound that you can get out of this tiny speaker. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your...

This is one of our largest speakers for use with the TSU-4400 in O-scale or larger models.Dimensions: 50 x 90 x37.5mm(D)Frequency Response: 230Hz - 20kHzPower: 2 Watts (Nominal) 5 Watts...

Brass street lamps suitable for H0-Track. Equipped with Warm White LED, resistor and connecting wire. Total height: 10.5cmTotal width: 3.5cm

Digitrax 9 pin to bare wire harnesses in 5 packs

9G mini servo system for turnout or motion control.Under layout mounting bracket included.Compact install for tight N scale switches, and decks.Includes pre-formed drive wires.Supplied with mount...

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC "quick plug" equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (p.n. 810069) to create a...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

This high-quality, high-flexibility hookup wire may be used for buss wiring, large-scale locomotives, or other applications where a heavy wire gauge is necessary.This wire features #24 AWG...

Fascia mount Switch control device.Wire to DS74 input cable, or use DSXC4 for plug and play.Two color leds display current Switch state.Supplied with 3 wire control cable.

2 LT5 Tester ModulesFor use with BDL16 Series Boards, BD4N, and other products

2 LT5C Tester Modules.For use with BDL716, BDL16 Series Boards, BD4N, and other products.

FeaturesUse with any DCC system to prevent large voltage spikes.Reduces or eliminates voltage spikes on long runs of DCC bus wireProtects decoders from damaging inductive voltage spikesSolve...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be...

Download unique sounds from your phone, tablet or computer to customize your project with immersive, realistic sound. Pack includes two Blank Cards. Each can hold up to 2 GB of space.Kit includes:2...

Great sound for your train if you can fit this one in your model!Dimensions: 40 x 28.5 x 11.3mm(D)Frequency Response: 250Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

This is a great speaker for many HO and S-scale locomotives.Dimensions: 40 x 20 x 8mm(D)Frequency Response: 550Hz - 12kHzPower: 1 Watt (Nominal) 1.5 Watts (Peak) Impedance: 8 Ohms

This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium.Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 740Hz - 4kHzPower: 1 Watt (Nominal) 1.5 Watts...

This small oval speaker is ideal for narrow hood diesels.Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz - 13kHzPeak Power: 2 WattsImpedance: 8 Ohms

If you have more space, this speaker is great for larger models.Dimensions: 35 x 20 x 5.3mm(D)Frequency Response: 560Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

This tiny speaker comes with a properly proportioned speaker enclosure and provides great results for space-constrained models!Dimensions: 16 x 12 x 11.3mm(D)Frequency Response: 300Hz - 20kHzPower: ...

Our tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models!Dimensions: 13 x 9 x 9.4mm(D)Frequency Response: 100Hz - 10kHzPower: 40mW...

Cobalt-S Cosmetic Parts (Top Castings x6) (Numbers x12)Spare etched brass numbers and cast metal ribbing for Cobalt-S.

Cobalt-S Spares (Harnesses and PCBs) (3 Pack)Three spare harnesses and connection PCB’s for Cobalt-S wiring.

Slim Vertical Mounted Magnetic Sensors (4-pack)(normally off or N.O. momentary type)These detectors have been designed to be very easy to install. Only 4mm in diameter, they will fit between the...

Ready to install in compatible locomotive motherboards26.5mm X 15.5mm X 9mmRated at 8 OhmRated at 1/2 Watt

NCE TBTB32 Blue Track Bus Taps, 14-16 Gauge, 32pk 

AND-8 Anderson Power Poles 8 Pack 4 each Red / Black

3mm (0.12”) diameter, 3.3V, Sunny White LEDs.

3mm (0.12”) diameter, 3.3V, Golden White LEDs.

Easily transfer your own sounds from a phone or computer to a Sound Card (JS6906-JS6918) using the Sound Card Reader. USB, Android and iPhone ports are built into the device for convenient transfer...

The Magnetic Track Trigger allows for versatility when activating a sound. It can be placed next to a track, allowing a model train to initiate a sound or installed on a presentation board to start a...

The Push Button is ideal for when you want to manually activate sounds a distance away from the Sound Hub. This small button trigger conveniently fits in many locations where the Sound Hub can't.RoHS...

The Trigger Delay controls how often a Trigger activates, preventing repeating sounds until a set amount of time has passed. For example, it works with a Motion Trigger (JS6956) or a Magnetic Track...

Micro Speakers are tiny and have good volume for its size. They are easy to hide in any layout, presentation board or diorama.Micro Speaker Dimensions: 15mm W x 24mm D x 6mm HRoHS CompliantKit...

Pluggable Terminal BlocksReplacement for lost or damaged Pluggable Terminal BlocksFor use with products using Pluggable Terminal BlocksIncludes:(1) 2 pin 3.5 mm Pluggable Terminal Block(1) 3 pin 3.5...

Set of 10 contacts (NL:SLEPERS) designed for N scale 

4 LED modules in the color RED. You can for example add lightning to your flashing lights or marker lights.

4 LED modules in the color GREEN. You can for example add lightning to your flashing lights or marker lights.

4 LED modules in the color YELLOW. You can for example add lightning to your flashing lights or marker lights.

4 LED modules in the color ORANGE. You can for example add lightning to your flashing lights or marker lights.

4 LED modules in the color BLUE. You can for example add lightning to your flashing lights or marker lights.

4 LED modules in the color WARM-WHITESo you can for example add lightning to your cockpit illumination or signal lamps

4 LED modules in the color WHITESo you can for example add lightning to your cockpit illumination or signal lamps

Warm White 0402 led to wire with resistor. Very handy for creating interior or marker lights.

Green 0402 LED to wire with resistor. Very handy for creating interior or marker lights.

Yellow 0402 LED to wire with resistor. Very handy for creating interior or marker lights.

Orange 0402 LED to wire with resistor. Very handy for creating interior or marker lights.

White 0402 LED to wire with resistor. Very handy for creating interior or marker lights.

Blue 0402 LED to wire with resistor. Very handy for creating interior or marker lights.

3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series BoardsThis is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item...

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.32 Ohm, 1/2 watt rating.Acoustically matched enclosure included for best sound level.For use with decoders that specify 32 Ohm speakers...

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.8 Ohms, 1/2 watt ratings.Acoustically matched enclosure included for best sound level.For use with decoders that specify 8 Ohm speakers...

Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.

30 gauge, seven strand wire with outside diameter of .026". Availible in 10ft and 20ft lengths.TCS is the leading supplier of the highest quality, most flexible wire in the industry! Not only is our...

30 gauge, seven strand wire with outside diameter of .026". Availible in 10ft and 20ft lengths.TCS is the leading supplier of the highest quality, most flexible wire in the industry! Not only is our...

This tiny, high-output speaker is suitable for N-scale and larger models.Dimensions: 20 x 4.2mm(D)Frequency Response: 750Hz - 9kHzPower: 0.5 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms

This tiny speaker has a high-output and works well for N-scale and larger models.Dimensions: 15 x 3.5mm(D)Frequency Response: 780Hz - 15kHzPower: 0.3 Watt (Nominal) 0.5 Watt (Peak)Impedance: 8 Ohms

If you have more space, this speaker works well for larger models.Dimensions: 30 x 5.3mm(D)Frequency Response: 490Hz - 10kHzPower: .5 Watt (Nominal) 1 Watt (Peak)Impedance: 8 Ohms

This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.

This speaker is perfect for enhancing the low bass sounds that are found in most diesel decoders. It is well worth the extra effort!Dimensions: 23 x 23 x 10.2mm(D)Frequency Response: 275Hz -...

This speaker is great for boosting the low frequencies in most diesel and “big” steam sounds.Dimensions: 27 x 14.3mm(D)Frequency Response: 350Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts...

This is our largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models.Dimensions: 28 x 28 x 11.2mm(D)Frequency Response: 310Hz - 20kHzPeak...

This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

Suitable for many HO and larger models. Dimensions: 28 x 4.5mm(D)Frequency Response: 320 Hz - 18kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be...

.

Use for joining LocoNet Cables, adding coiled cords to throttles, etc.SpecificationsFor Use WithDigitrax Layouts and Throttles

Use with crimper tool to make custom length LocoNet cables & replace broken plugs.SpecificationsFor Use WithDigitrax Layouts and Throttles

RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and...

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance...

The UTP-CAT5 Adapter lets you change from our RJ12 plug to the CAT5 plug so that you can use the existing Cab Bus cable you already have!

.

TS6S On/On SPST Toggle Switch 6-Pack -125V - 5A

Easily extend the length of Mini Speaker and Micro Speaker cables with Speaker Extension Cables. Two included Cables each provide 6 feet of expansion between the Speaker and Sound Hub Port connection...

Easily extend the length of any Trigger cable with Trigger Extension Cables. Two included Cables each provide 6 feet of expansion between the Trigger and Sound Hub Port connection.Kit includes:2 6'...

Easily extend the length of Just Plug Sound System Power Supply cables with Power Supply Extension Cables. Two included Cables each provide 6 feet of expansion between the Power Supply and Sound Hub...

Easily extend the length of Just Plug Sound System Power Supply cables with Stereo Plug Extension Cables. Two included Cables each provide more than 6 feet of expansion between the Stereo Room...