Digitrax

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You...

Plug and Play Universal fascia panel supporting LocoNet.Two RJ12 front panel Throttle jacks.Three RJ12 rear pass-through LocoNet jacksSupports throttle charging.Fully connectorized installation.2mm...

TF4 Quad DCC Function Decoder with Integrated TransponderFour 125mA (250mA peak) function output for lights or other functionsFunctions can be turned on/off using F0-F12Supports both 2 digit and 4...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3For Kato SD40-2 and similarDrop-in light board replacement1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma Output8 Ohm...

2 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotivesDigitrax 9-Pin HarnessMotor 1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma OutputNew sound ...

Everything you need to make LocoNet Cables for your layout: Crimper tool for cutting cables to length and attaching plugs to cable ends LT1 LocoNet Tester for testing cables prior to...

2 pack of 8 foot LocoNet Cables. Convenient pre-made, pre-tested cables, ready to use on your layout. LocoNet Wiring is a snap with these cables. Specifications For Use With All...

Fits Many Z, N and HO Locomotives with 6 Pin NEM 651 type plug    Size: .36” x .42” x .13”    9.05mm x 10.61mm x 2.67mm    N Scale    1.0...

9G mini servo system for turnout or motion control.Under layout mounting bracket included.Compact install for tight N scale switches, and decks.Includes pre-formed drive wires.Supplied with mount...

Input interconnect board for DS74.Provides plug and play connectivity for DS74 inputs.Supplied with ribbon cable to plug into DS74 10 pin Input header.Allows plug-in of up to 4 DSXCP1 fascia controls...

Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug Motor & Function Decoder that fits many N and HO Scale Locos.    Size: 0.87” x 0.4” x 0.2”    22.16mm x 10...

Wired Motor & Function Decoder that fits many N and HO Scale Locos.    Size: .55” x .404” x .2”    13.9mm x 10.3mm x 5 mm    N/HO...

The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.Available in standard tethered or...

Fits many Kato HO legacy locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced...

Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack.Compatible with Digitrax throttles with 3-pin battery plug.Chargeable when inside Digitrax throttles, no need to remove the battery cover.No...

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and BoostersThis item is a replacement part that can be ordered through your dealer.  Digitrax does not...

The easiest most cost effective way to add automatic reversing to one section of your DCC layout. AR1 Features: Cost effective automatic reversing for one reversing...

Eight 9G servo decoder for 2-position Slow-motion turnouts.Configurable to control eight 3-position semaphores.Works with compatible LocoNet Systems.Plug and play connections.Option setup switches...

Simplifies hookup, maintenance and troubleshooting of LocoNet.All connections plug-detachable.One RJ12 Throttle Jacks in front panel.IR and NET Indicator LEDsTwo RJ12 LocoNet Jacks in rear for...

2 LT5C Tester Modules.For use with BDL716, BDL16 Series Boards, BD4N, and other products.

Fits many 21MT equipped HO locomotivesDigitrax 21-pin MT socket1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

All plug-in connectors for simple and easy installation and service.User defined as 16 DS reporting addresses in 1 to 2000+ DS range.Easy setup with device Option Switches (OPSW)Powered by 2mm DC...

Fits many 21MT equipped HO locomotivesDigitrax 21-pin MT socket1.0 Amp/2 Amps Peak2 FX7 Functions, 300ma Output

Fits Kato, Athearn Genesis, Stewart, other HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

Fits Kato FP40-PH or compatible HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Kato SD38-2 or compatible HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Kato AC4400 or compatible HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 28 mm round speaker w/330uF Capacitor

Fits many Kato HO legacy locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

Fits many Kato N-locomotivesDrop-in light board replacement decoder for Kato “K0” form-factor boards1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma output

Fits many Kato N-locomotivesDrop-in light board replacement decoder for Kato “K0” form-factor boards1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma output

Fits many Kato N-locomotivesDrop-in light board replacement decoder for Kato “K0” form-factor boards1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma output

Fits many Kato N-locomotivesDrop-in light board replacement decoder for Kato “K0” form-factor boards1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma output

Fits many Kato N-locomotivesDrop-in light board replacement decoder for Kato “K2” form-factor boards1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma output

Fits many Kato N-locomotivesDrop-in light board replacement decoder for Kato “K1” form-factor boards1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma outputReplaces both the DN163K1C & DN163K1D

Fits many older Atlas N locomotivesMobile DecoderDrop in “A1” Atlas light board replacement decoder1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma output

Fits E24 socket locomotivesN-Scale Mobile Decoder13 FX3 Functions, 200mA capacityMotor drive at connector capacity

Fits Kato, Athearn Genesis, Stewart, other HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

Fits several Atlas N locomotivesMobile Decoder with SoundFX8 Ohm 9x18x4 mm oval speaker1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma output

Fits many Atlas N locomotivesMobile Decoder with SoundFX8 Ohm 9x18x4 mm oval speaker1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma output

Fits many older Atlas N locomotivesMobile DecoderDrop in “A0” Atlas light board replacement decoder1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma output

Fits E24 plug N locomotives and compatible unitsPlug-in E24 socketMotor drive at connector capacity13 FX7 Functions, 200mA capacity8 CV Selectable Steam & Diesel Sound Schemes Included

High-capacity wired Mobile decoderFits many larger locomotives4 Amp/5 Amps Peak8 FX3 Functions, 300ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and PS-HarnessMedium Plug with approximately.1.2" wires1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and P-HarnessMedium Plug with approximately.3.2" wires1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

Fits many HO locomotivesDigitrax 9-Pin Harness Socket1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and PS-HarnessMedium Plug with approximately.1.2" wires1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and P-HarnessMedium Plug with approximately.3.2" wires1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Fits many HO locomotivesDigitrax 9-Pin Harness Socket1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many larger locomotives4 Amp/5 Amps Peak8 FX3 Functions, 300ma Output8 Ω Box Speaker330uF CapacitorNew...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits Atlas N FA-1 locomotive and othersPlug-in Next18 connectorMotor drive at connector capacity6 FX3...

Mobile DecoderFits Next18 socket locomotivesPlug-in Next18 connectorMotor drive at connector capacity6 FX3 Functions

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotives21MTC interfaceMotor 1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma OutputNew sound .spjs...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3For Kato N P42 and similar1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma Output8 Ohm 13mm round Speaker100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3For for Kato 4-8-4 FEF-3 and similarDrop-in light board replacement1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3For Kato SD80 MAC and similar1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma Output8 Ohm 9x18x4 mm oval speaker100uF...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotivesDigitrax Easy Connect 8 Pin HarnessMotor 1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma...

2 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotivesDigitrax Easy Connect 8 Pin HarnessMotor 1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma...

2 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotives21MTC interfaceMotor 1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma OutputNew sound .spjs...

Pluggable Terminal BlocksReplacement for lost or damaged Pluggable Terminal BlocksFor use with products using Pluggable Terminal BlocksIncludes:(1) 2 pin 3.5 mm Pluggable Terminal Block(1) 3 pin 3.5...

2 LT5 Tester ModulesFor use with BDL16 Series Boards, BD4N, and other products

Z Scale Mobile DecoderDCC Board Replacement for AZL PA1 locomotive2 FX3 FunctionsTorque Compensation for smooth as silk silent operation.128 Speed Step operation (14 or 28 steps can also be...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotivesDigitrax 9-Pin HarnessMotor 1.0 Amp/2 Amps Peak6 FX3 Functions, 200ma OutputNew sound ...

Supports up to 400 locomotives and throttles.On-board USB port.Three RJ12 LocoNet portsSupports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.5amp/8amp Booster with...

Fully connectorized installation.Optional support for DCC 9-Aspect control mode, including Lunars.Easy setup with Option Switches and LocoNet programming.Configurable for four solenoid or four...

4 Power Manager sub-districts.Upgraded replacement for PM42, fully encased.Fully connectorized installation.Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit...

Fascia mount Switch control device.Wire to DS74 input cable, or use DSXC4 for plug and play.Two color leds display current Switch state.Supplied with 3 wire control cable.

Quad switch decoder for Solenoid or Slow-motion turnouts.Configurable for Capacitive Discharge with balky solenoids.Configurable for on/off control of 8 layout lights.Plug and play wire...

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already...

Your TL1 can be used as:1. Function only DCC decoder with transponding2. Digitrax Transponder3. Function only DCC decoder without transponding.Single 125mA (250mA peak) function output for lights or...

For use with Digitrax Decoders Equipped with 6 pin Function Harness8 ohm 10x18 mm Oval speaker included.Keeps locos running during intermittent power interruptions resulting from dirty or bad track.0...

This power supply replaces the PS2012 to meet new efficiency requirements for DC power supplies. It delivers more power with less heat for more efficient operation. The 20 amp PS2012E regulated power...

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page.Wi-Fi interface to a Digitrax...

Board Replacement Decoder for Marklin Mini Club 88455 and others. 1 Amp with 2 FX3 Functions.SpecificationsCurrent Rating-Motor 1.0 Amp/1.25 Amps PeakSize 0.421” x 2.357” x 0.087” (10...

Features:Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion® System makes them run like the real thing, too!    Torque Compensation for...

Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion MachinesDS52 Features:Simple hook up and set up.Control 2 individual turnout machines.2 Slow motion turnout machines, such as...

Features:    Board replacement decoder for Atlas MP15 units    Golden-White LEDs for added realism    Decoder Lock equipped Don’t settle for a decoder...

Fits Many N/HO Locomotives with 8 pin Medium Socket    Size: .55” x .404” x .2”    13.9mm x 10.3mm x 5 mm    N/HO Scale    Digitrax Easy...

Features:DG583S fits all large scale locos.Easy installation with screw terminals for all wire connections.Decoder Lock equippedSpecificationsCurrent Rating-Motor5.0 Amps (10.0 Amps Peak)Size1.45” x...

Dual 3/5/8 Amp AutoReversing DCC BoosterUp to 16 Amps of power totalN, HO, & Large Scale Operations with Custom Voltage TrimLocoNet for easy plug ‘n play installation and system expansionEasy dip...

DB210-OPTO Single 3/5/8 Amp AutoReversing DCC Booster that is Opto-Isolated for layouts with common rail wiringSingle 3/5/8 Amp AutoReversing DCC Booster (no command station capability)Up to 8 Amps...

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)Up to 8 Amps of power totalN, HO, & Large Scale Operations with Custom Voltage TrimLocoNet for easy plug ‘n play...

3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series BoardsThis is a replacement part that can be ordered through your dealer.  Digitrax does not repair this...

BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring!DCC Occupancy Detection supports up to 8 Detection Sections letting you know when...

Low-cost, High-sensitivity DCC block-occupancy detection.Adjustable resistance/current detection section (DS) trip threshold.8A capacity, suitable for all scales and track wiring configurations.Noise...

Works with compatible LocoNet SystemsCompact size for easy one-handed operationColor 1.5” LCD Display ScreenFull numeric keys for easy locomotive selectionFine speed control with encoder...

Works with compatible LocoNet SystemsCompact size for easy one-handed operationColor 1.5” LCD Display ScreenFull numeric keys for easy locomotive selectionFine speed control with encoder...

Everything you need to get started with Advanced Digitrax Command Control.Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting, the...

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles.Access to LocoNet & Power Ports when stowed away.Stores throttle when not in use or when charging.Fascia mounted.Durable design...

4-PackBracket will hold: DT602, UT6 and other legacy Digitrax throttles.Access to LocoNet & Power Ports when stowed away.Stores throttle when not in use or when charging.Fascia mounted.Durable...

The DT602D is our top-of-the-line, Duplex Radio Super Throttle.  The DT602D Advanced Super Throttle gives you direct control of two locos at a time with all the powerful features and flexibility...

UR93 Features:Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).More than double the radio range of UR92 Duplex units.Improved multi-path performance for cluttered...

Everything you need to get started with Advanced Digitrax Command Control.Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.It offers excellent...

Features:DG583AR fits locos with AristoCraft DCC plug arrangement.Use with locos that have two motors per truck such as AristoCraft SD45.Decoder Lock equippedSpecifications:Current Rating-Motor 5...

Board Replacement Decoder for Marklin Z 88584 and others.1 Amp with 2 FX3 Functions.SpecificationsCurrent Rating-Motor1.0 Amp/1.25 Amps PeakSize0.415” x 2.722” x .0108” (10.541mm x 69.1388mm x ...

Features:DH165Q1 fits Atlas, Intermountain, LifeLike & Other factory sound-equipped HO Locomotives.Compatible with Digitrax Sound Bug.Decoder Lock equippedQSI-style PCB replacement Plug N’Play...

Features:DH165K1A fits many Kato HO Diesel Locomotives.Compatible with Digitrax Sound BugDecoder Lock equippedSpecificationsCurrent Rating-Motor1.25 Amp (2.0 Amps Peak)Size2.877” x .667” x .173” (73...

Add a coiled cord to your LocoNet Throttle without soldering! Just plug the modular adapter provided on to your existing Throttle plug and add the coiled cord.   Specifications For...

Fits New InterMountain N Scale SD40-2 released 20171.5 Amp/2 Amp Peak6 FX3 Functions, 0.5 Amp.329” x 2.603” x .065”8.36mm x 66.11mm x 1.64mm

Digitrax 9 pin to DCC medium plug long harness (3”)