Digitrax

Digitrax 9 pin to DCC medium plug long harness (3”)

Digitrax 9 pin to bare wire harnesses in 5 packs

Decoder Wire for decoder, lighting & signal installation 90ft 30AWG stranded wire-10 ft lengths in 9 colors

Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6...

Fits Intermountain N Scale FP7A with wired motors produced after Jan 2014 6 FX3 Functions 472” x 2.165” x .098” 11.98mm x 54.99mm x...

All the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere!0.55" x 0.28" x 0.128" (14 x 7.13 x 3.25 mm) Works with Z, N, and HO scale locos 1 Amp/1.25...

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.32 Ohm, 1/2 watt rating.Acoustically matched enclosure included for best sound level.For use with decoders that specify 32 Ohm speakers...

SP282832 - Round 28mm 32 Ohm Speaker with wires. Great for HO installations.Used on current production SFX004, SFX064D, SDH164D & SDH164K1A sound decoders.Digitrax recommends the use of a baffle...

N scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10...

For use with Digitrax Decoders Equipped with 6 pin Function HarnessKeeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track...

For use with Digitrax Decoders Equipped with 6 pin Function Harness8 ohm 16 x 26 x 9 mm box speaker includedKeeps locos running during intermittent power interruptions resulting from dirty or bad...

The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically without...

MS100 RS232 Computer Interface for connecting LocoNet to your IBM compatible PC.The MS100 Computer Interface is designed to let a computer with an IBM compatible COM, or RS232 communications port,...

Series 6 Features4 FX3 Functions.386” x .559” x .137”9.8mm x 14.2mm x 3.48mmFits Many N and HO Locomotives

Fits Many Z, N and HO Scale Locomotives    Size: .455” x .369” x .126”    11.56mm x 9.37mm x 3.2mm    Z, N and HO Scale    1.0 Amp/1.5 Amps...

Board Replacement Decoder for American Z Line (AZL) GP-30 Diesels and others. 1 Amp with 2 FX3 Functions.SpecificationsCurrent Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6...

Features:This 2 function FX3 decoder is designed to fit MicroTrains Z scale GP-35 locos. 128 Speed Step operation (14 or 28 steps can also be used)Momentum with acceleration and deceleration...

DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts, easy cost effective way to add DCC control to your Kato Unitrack Turnouts. DS51K1 Features: Stationary Decoder For Single Kato...

Lets you share decoders among locomotives2” wires from Digitrax plug to DCC 8 pin plugFits many HO locomotives with 8 pin socket

For Intermountain N scale FP7A and FP9A with motor contact "shoes"6 FX3 Functions.472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mmReplaces DN163I2▪FX3 Function outputs for prototypical lighting...

For InterMountain N Scale F7A & B units with wired motors produced after Jan 20146 FX3 Functions.472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mmNOTE: Will not fit in new Intermountain FP7Replaces...

For Intermountain N scale F3 and F7 A & B units with motor contact "shoes"6 FX3 Functions.472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mmReplaces DN163I1C▪FX3 Function outputs for prototypical...

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Features:Series 3 Decoder for Proto 2000 Plug ‘N Play InstallationCompatible with Sound BugDecoder Lock equippedSpecificationsCurrent Rating-Motor1.5 Amp (2.0 Amps Peak)Size.67” x 1.05” x 0.25” (17...

Features:DG383AR fits locos with AristoCraft DCC plug arrangement.Use with locos that have single motor per truck such as AristoCraft RS-3 & RDC.Decoder Lock equippedSpecificationsCurrent...

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and Boosters

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer6 LocoNet Jacks for use with all scalesReduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive opreration with Digitrax...

Fits Many Z, N and HO Scale Locomotives    Size: .455” x .369” x .126”    11.56mm x 9.37mm x 3.2mm    Z/N/HO Scale    1.0 Amp/1.5 Amps...

Fits Many DCC-Ready Z, N and HO Scale Locomotives    Size: .55” x .4” x .148”    14mm x 10.23mm x 3.77mm    Z/N/HO Scale    1.0 Amp/1.5...

Fits Many DCC-Ready N and HO Scale LocomotivesSize: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mmN Scale1.0 Amp/1.5 Amps PeakFX3 Function outputs for prototypical lighting effects and on/off...

Series 6 Features2 FX3 Functions.418” x .621” x .107”10.63mm x 15.79mm x 2.72mmFits MicroTrains Line SW1500 units

Oval 10mm x 18mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.   Used on current production SDN144A0, SDN144A1 & SDN144PS sound decoders.  Digitrax recommends...

Replaces DN163A2Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locosDecoder Lock equipped SpecificationsCurrent Rating-Motor: 1.5 Amp (2.0 Amps...

The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91 UR92 and others    Universal AC input 95-240V...

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.8 Ohms, 1/2 watt ratings.Acoustically matched enclosure included for best sound level.For use with decoders that specify 8 Ohm speakers...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker...

Ready to install in compatible locomotive motherboards26.5mm X 15.5mm X 9mmRated at 8 OhmRated at 1/2 Watt

Fits many HO, O & G Scale installations. Also fits in N Scale box cars. 26.5mm x 15.5mm x 9mm. 8 Ohm, 1/2 watt ratings. Acoustically matched enclosure included for best sound level. For use...

Round 13mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations. Used on current production SDN144K0A and SDN144K1E sound decoders.Digitrax recommends the use of a baffle or...

N scale Mainline Signaling Kit including:2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used...

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance...

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.

HO scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker...

Features:Wired Mobile Decoder with SoundFX® & FX3 Function for most HO and many N scale Locomotives.Preloaded with selectable generic steam and diesel sound schemesVisit Digitrax Sound Depot to...

Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.Use this kit to make signal driver cables to connect your SE8c to the...

The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there.RX4...

RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and...

Keeps locos & sound running during power interruptions caused by dirty or bad track.Hold up time varies based on decoder load & track conditions.PX112-2 Plug ‘N Play Install on DH126 &...

For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connectionsKeeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F...

The LT1 is included with all Digitrax Starter Sets. It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2...

Use for joining LocoNet Cables, adding coiled cords to throttles, etc.SpecificationsFor Use WithDigitrax Layouts and Throttles

LocoNet Layout Wiring Made Simple!Pre-made, pre-tested 50 foot LocoNet cable.Use on any LocoNet Layout.Use for long runs or divide into custom lengths using LocoNet Cable Maker Kit & RJ12 Plugs...

2 pack of 16' LocoNet Cables.Convenient pre-made, pre-tested cables, ready to use on your layout.LocoNet Wiring is a snap with these cables. SpecificationsFor Use WithAll LocoNet Layouts

Basic Quad Stationary Decoder for Slow Motion Turnout Machines, add cost effective DCC control to your slow motion turnouts. DS44 Features:No frills stationary decoder.Simple installation and...

Lets you share decoders among locomotives4” wires make it easy to install in N or HO5-Pack

Lets you run locos as DC or DCCFor DC only operation use the dummy plug with either DNWH or DNWHPSFor DCC operation remove the DNDP and replace with a decoder5-Pack

For Intermountain N scale FT B units with motor contact "shoes"6 FX3 Functions.472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mmReplaces DN163I1B▪FX3 Function outputs for prototypical lighting effects...

For Intermountain N scale FT A units with motor contact "shoes"6 FX3 Functions.472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mmReplaces DN163I1A▪FX3 Function outputs for prototypical lighting effects...

Fits Intermountain N scale SD40T-2 / SD45T-26 FX3 Functions3.5” x .367” x .135” w/ LED88.9mm x 9.32mm x 3.42 mmReplaces DN163I0▪FX3 Function outputs for prototypical lighting effects and on/off...

Features:Board replacement decoder for MicroTrains FT.Golden-White LEDs for added realismDecoder Lock equippedSpecificationsCurrent Rating-Motor1 Amp Continuous/1.5 Amp Peak RatingSize2.158” x .58” x...

Board Replacement Decoder for Walthers Proto GP20 and similar locosSpecificationsCurrent Rating-Motor1.00 Amp (1.25 Amps Peak)Size0.35” x 2.12” x 0.044” (8.89mm x 53.848mm x 11...

Board replacement Decoder for Kato N Scale MP36PH MetraSpecificationsCurrent Rating-Motor1.00 Amp (1.25 Amps Peak)Size0.411” x 2.351” x .061” (10.4394mm x 59.7154mm x 15.494mm)

Board Replacement Decoder for Kato N-Scale Glacier Express1.5 Amp/2.0 Amps Peak Motor Current Rating6 FX3 Functions-500mA Function Current RatingSpecificationsCurrent Rating-Motor1.25

Features: DN143K2 makes installation possible though it is somewhat challenging because of the model itself. If you use reasonable care, you will be able to handle this installation. ...

Digitrax LocoMotion™ SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent operation...

Features: Series 3 HO Plug ‘N Play Decoders with Integrated PlugCompatible with Sound Bug (Note this is not a plug n' play installation, wiring is required) Decoder Lock...

10 Pack Warm White T1 LEDsMake your locomotive lights sparkle!  Use these beautiful warm white LEDs to replace the harsh blue white LEDs that are sometimes shipped with locomotives.  Simply...

Digitrax 9 pin to DCC medium plug short harness (1”)

Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on...

Wired Motor & Function Decoder that fits many N and HO Scale Locos.    Size: .55” x .4” x .148”    14mm x 10.23mm x 3.77mm    Z/N/HO...

Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6...

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!   ...