Digitrax

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Features:Series 3 Decoder for Proto 2000 Plug ‘N Play InstallationCompatible with Sound BugDecoder Lock equippedSpecificationsCurrent Rating-Motor1.5 Amp (2.0 Amps Peak)Size.67” x 1.05” x 0.25” (17...

Features:DG383AR fits locos with AristoCraft DCC plug arrangement.Use with locos that have single motor per truck such as AristoCraft RS-3 & RDC.Decoder Lock equippedSpecificationsCurrent...

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and Boosters

The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections. Lets you know when detection sections of your layout are occupied.When used in conjunction with one or two...

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer6 LocoNet Jacks for use with all scalesReduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive opreration with Digitrax...

Fits Many Z, N and HO Scale Locomotives    Size: .455” x .369” x .126”    11.56mm x 9.37mm x 3.2mm    Z/N/HO Scale    1.0 Amp/1.5 Amps...

Features:    Designed to fit the Kato N scale SD40-2    locos made from year 2009 onward SpecificationsCurrent Rating-Motor    1 Amp Continuous/1.25...

Sound Module for HO, N, O Locomotives and Rolling Stock Plug N’ Play SoundFX® 8 Ohm 16 x 26 x 9mm Box Speaker & 330uF Capacitor Preloaded...

Fits Many DCC-Ready Z, N and HO Scale Locomotives    Size: .55” x .4” x .148”    14mm x 10.23mm x 3.77mm    Z/N/HO Scale    1.0 Amp/1.5...

Fits Many Z, N and HO Locomotives with 6 Pin NEM 651 type plug    Size: .36” x .42” x .13”    9.05mm x 10.61mm x 2.67mm    N Scale    1.0...

Features:Designed to fit the Kato N scale P-42, PA-1 & E-8 Golden-White LEDs for added realism Decoder Lock equipped SPECIFICATIONSCurrent Rating-Motor: 1 Amp Continuous/1.25 Amp Peak...

Features: DH165K0 Fits Kato, Stewart, Atlas & OtherHO LocomotivesCompatible with Sound BugDecoder Lock equipped SpecificationsCurrent Rating-Motor    1.25 Amp (2.0 Amps...

Add more connections to your LocoNet system. UP5 Simplifies hook-up, maintenance & troubleshooting of LocoNet, add a few to make traditional tethered walk-around operation a snap.   UP5...

Mobile Decoder with Premium 16-Bit SoundFX21MTC interface with Configurable Logic Level or 12v F3-6 function outputs8 Selectable Steam & Diesel Sound Schemes1.0 Amp/2 Amps Peak8 FX3 Functions,...

SoundFX®/Motor/Function Decoder            Board replacement decoder for Kato SD38-2 HO LocomotivesPreloaded with SD38-2 Sound SchemeReplaces SDH104K1B &...

Fits Many DCC-Ready N and HO Scale LocomotivesSize: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mmN Scale1.0 Amp/1.5 Amps PeakFX3 Function outputs for prototypical lighting effects and on/off...

Series 6 Features2 FX3 Functions.418” x .621” x .107”10.63mm x 15.79mm x 2.72mmFits MicroTrains Line SW1500 units

Oval 10mm x 18mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.   Used on current production SDN144A0, SDN144A1 & SDN144PS sound decoders.  Digitrax recommends...

For use wth PS2012 power supplyEach ‘Y’ Cable comes with dual 5 amp protected outputsSee the Digitrax PS2012 manual for additional informationUp to 24 volt AC or DC compatibleFor SELV (Safety Extra...