Digitrax

Fits Many DCC-Ready N and HO Scale LocomotivesSize: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mmN Scale1.0 Amp/1.5 Amps PeakFX3 Function outputs for prototypical lighting effects and on/off...

Series 6 Features2 FX3 Functions.418” x .621” x .107”10.63mm x 15.79mm x 2.72mmFits MicroTrains Line SW1500 units

Oval 10mm x 18mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.   Used on current production SDN144A0, SDN144A1 & SDN144PS sound decoders.  Digitrax recommends...

For use wth PS2012 power supplyEach ‘Y’ Cable comes with dual 5 amp protected outputsSee the Digitrax PS2012 manual for additional informationUp to 24 volt AC or DC compatibleFor SELV (Safety Extra...

Replaces DN163A2Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locosDecoder Lock equipped SpecificationsCurrent Rating-Motor: 1.5 Amp (2.0 Amps...

    672” x 1.074” x .259”    17.08mm x 27.28mm x 6.6mm    Digitrax Easy Connect 9 Pin Harness    1.5 Amp/2 Amp Peak Current...

The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91 UR92 and others    Universal AC input 95-240V...

Cost effective wireless operation with infrared technologyUR90 is a front panel unit that is an infrared receiver.  All current production Digitrax throttles are factory equipped with infrared...

TF4 Quad DCC Function Decoder with Integrated TransponderFour 125mA (250mA peak) function output for lights or other functionsFunctions can be turned on/off using F0-F12Supports both 2 digit and 4...

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.8 Ohms, 1/2 watt ratings.Acoustically matched enclosure included for best sound level.For use with decoders that specify 8 Ohm speakers...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker...

Ready to install in compatible locomotive motherboards26.5mm X 15.5mm X 9mmRated at 8 OhmRated at 1/2 Watt

Fits many HO, O & G Scale installations. Also fits in N Scale box cars. 26.5mm x 15.5mm x 9mm. 8 Ohm, 1/2 watt ratings. Acoustically matched enclosure included for best sound level. For use...

Round 13mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations. Used on current production SDN144K0A and SDN144K1E sound decoders.Digitrax recommends the use of a baffle or...

N scale Mainline Signaling Kit including:2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used...

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance...

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.

HO scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker...

Features:Wired Mobile Decoder with SoundFX®+Accessory type functions for most HO Locomotives. Preloaded with selectable steam and diesel Sound SchemesIncludes 28mm 32 Ohm Speaker & 330uF...