Hot Racing

Hot Racing Brass tight tolerance steering Fix links for the Axial SCX30FEATURES: - The linkage set are much tighter than the stock steering linkage.- CNC Brass Bar stock- stainless Steel pivot...

Hot Racing aluminum tight tolerance steering links for the Axial SCX30FEATURES: - The linkage set are much tighter than the stock steering linkage.- 6061 aluminum links, Silver anodized- Steel pivot...

FEATURES: - CNC 6061-T6 Aluminum servo saver set,- silicone servo saver o-ring- Anodized silverYOU WILL RECEIVE: - One (1) CNC 6061-T6 Aluminum servo saver setREQUIREMENTS: - installation (do not...

Hot Racing brass SCX30 Axles Rear Hub for the Axial SCX30 axles. Add extra weight to your crawler where it needs it down low. Adds about 4.1g (0.144 oz) to each Side.FEATURES: - CNC machined solid...

Hot Racing brass Worm gear Axles steering blocks (steering knuckles) for the Axial SCX30 axles. Add extra weight to your crawler where it needs it down low. Adds about 7.6g (0.27oz) to each steering...

Hot Racing wheel weights for the stock 0.7 in wheels AXI3313 on the Axial SCX30FEATURES: - CNC machined solid brass billet- 3.6g each fitted to the wheels to lower the vehicles center of gravity,...

This is a Hot Racing No Flex optional upgrade Brass 4-link set for Axial SCX30 vehicles.Add increase durability to your SCX30 with LWB by upgrading your stock plastic links with the Hot Racing brass...

This is a Blue Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES: Blue Anodized Aluminum constructionYOU WILL RECEIVE: One heat sink for 030 motorREQUIREMENTS: for better heat...

Hot Racing optional upgrade heavy duty Steel Rear CVD Universal Axles Drive Shafts for Arrma Grom vehicles.FEATURES: - Heavy duty CNC machined steel wheel stub shafts- Replaces factory CVD Dog bone...

Hot Racing optional upgrade heavy duty Steel Front CVD Universal Axles Drive Shafts for Arrma Grom vehicles.FEATURES: - Heavy duty CNC machined steel wheel stub shafts- Replaces factory CVD Dog bone...

11T Mod-1 Pinion Gear for use on 1/8 and 1/10 Scale Cars use Mod 1 Spur Gear.FEATURES:Hardened Steel ConstructionBlack in colorYOU WILL RECEIVE:One 11T Mod-1 Pinion GearOne 4x4mm Set...

Hot Racing optional hop-up rear suspension lower links (ladder bar) for the Losi Baja Rey, Hammer Rey Rock Rey and Baja Rey 2.FEATURES:- CNC machined 3mm thick carbon fiber- CNC machined 6061...

Hot Racing 1.9 6-lug steel wagon wheels in black with 12mm hex hubsFEATURES:- Stamped steel wheel design smoothed out with nickel plating and then finished with durable powder coating- Three-piece...

This is the optional Hot Racing Aluminum Rear Upper Suspension Arm foruse with the ARA 1/18 GromFEATURES: - CNC Aluminum Construction- Anodized Black in Color- Steel pivot ballsYOU WILL...

Hot Racing 20T aluminum Steering horn (arm) for the Losi Mini LMTFEATURES: - CNC Aluminum 20T servo saver set,- Steel servo saver spring- Anodized blackYOU WILL RECEIVE: - One (1) CNC Aluminum servo...

Hot Racing replacement Sway Bars SRoll bar pivot Mount for the Losi mini LMT sway bar kit (Los214042) made for the Losi mini LMTFEATURES: - CNC 6061 aluminum Aluminum Roll bar pivot MountYOU WILL...

This is the optional Hot Racing Aluminum Rear Suspension Arm foruse with the Arrma 1/18 GromFEATURES: CNC Aluminum Construction Anodized Black in Color CNC Machined Rear Lower Suspension Arm...

This is the optional Hot Racing Aluminum Front Upper Suspension Arm for use with the Arrma 1/18 GROMFEATURES: - CNC Aluminum Construction- Anodized Black in Color- Steel pivot ballsYOU WILL RECEIVE:...

Optional Aluminum Servo Mounts for the Grom series.FEATURES: Two position mount for stock servo and Savox Servo (SH-0265MG)CNC Aluminum construction, black in colorDirect fit hop-up requires no...

Hot Racing CNC aluminum tight tolerance steering links for the Losi Mini LMTFEATURES:- The linkage set are much tighter than the stock steering linkage.- 6061 aluminum links, Black anodized- Steel...

Sway Bar Spring Rod Set for the Losi LMTFEATURES:Spring Steel constructionSway Bars are color coded by sway bar diameterYOU WILL RECEIVE:(6) Pair of Sway Bars Spring Rod(4) Gold 1.5mm (Hard)(4)...

Hot Racing Multi aluminum Upper shock moun for the 1/18th scale Losi Mini LMT vehiclesFEATURES:- Black anodized CNC machined aluminum construction- Four Upper shock mount options- Direct bolt-on...

Hot Racing Multi aluminum Lower shock moun for the 1/18th scale Losi Mini LMT vehiclesFEATURES:- Black anodized CNC machined aluminum construction- Two Lower shock mount options- Direct bolt-on...

CNC aluminum Heavy Duty Bearing rear axle Mount lockout for the Losi Mini LMTFEATURES:CNC Aluminum lockouts are made of strong light weight 6061Heavy Duty BearingAnodized black with a laser etched...

Hot Racing heavy duty aluminum steering blocks, (Spindle, axle carriers, knuckle) with oversize bearing for the 1/8 Losi LMT.FEATURES:- CNC machined aluminum, anodized black- Heavy duty rubber sealed...

DESCRIPTION:This is the optional Hot Racing Aluminum Mid Chassis Brace for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Mid Cross...

DESCRIPTION:This is the optional Hot Racing Aluminum Chassis Brace Body Lock Plate for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Cross Brace...

DESCRIPTION:This is the optional Hot Racing Aluminum Chassis Brace Lower for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Cross Brace...

DESCRIPTION:This is the optional Hot Racing Aluminum Chassis Brace Upper for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Cross Brace...

Hot Racing Aluminum Lower Link Mount with Roller bearing 1/18th scale Losi Mini LMT vehiclesFEATURES:- Black anodized CNC machined aluminum construction- Two Aluminum Lower Link Mount- Direct bolt-on...

Hot Racing optional aluminum Front axle upper link mount for the Losi mini LMTFEATURES:- CNC machined 6061-T6 aluminum, anodized black- Stronger and more rigid than stock plastic component- Retains...

Hot Racing 12mm aluminum clamping wheel hexes for the front and rear of the 1/18 Mini LMT vehicles.FEATURES:- CNC 6061 aluminum construction- Anodized black in color- Clamps onto axles so drive pin...

Hot Racing 6x18mm aluminum standoff posts with M3 threads for miscellaneous applications such as suspension links, tie rods, or chassis cross membersFEATURES:- CNC machined 6061-T6 aluminum- Anodized...

Hot Racing Conversion aluminum Tele Damper kit for SXTF326R01 or SXTF326RX04. These Conversion shocks are friction damped, requiring only a coating of tacky grease .FEATURES:- Machined aluminum and...

Hot Racing optional upgrade aluminum High Clearance Links 4 link set for 5.26" (133.7mm) wheelbase Axial SCX24 vehicles.Add increase articulation durability to your SCX24 with LWB by upgrading your...

Hot Racing steel super duty Steel Spur Gear 55T 0.8Mod (32P) spur gear for 1/10 off road and 1/8 all road Arrma 4X4 vehicles. See comments below for specific vehicle fit information.FEATURES:- Rugged...

Hot Racing aluminum fixed steering link and locked servo arm for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, Typhon BLX and 1/7 LimitLess InFraction Mojave, Felony...

Hot Racing aluminum front c-hubs (caster blocks) for 1/10 4S BLX Arrma 4X4 vehicles.See comments below for specific vehicle fit information.FEATURES:- Stronger and stiffer than stock plastic caster...

Hot Racing aluminum threaded front shock bodies 1/10 Arrma 4X4 4S BLX vehicles. See vehicle compatibility in comments below.FEATURES:- Threaded shock bodies for easy, precise, and consistent...

Hot Racing Aluminum Roof Rack with Light Bar with LEDs Light BarFEATURES:- 4 LEDs Light bar- Rugged CNC aluminum housing for durability and to dissipate heat- Realistic detailYOU WILL RECEIVE:- One...

Hot Racing 40 tooth, 1.0 Mod spur gear for the Traxxas Revo 3.3 and Slayer Pro 4X4FEATURES:- CNC machined and hardened steel construction- Upgrades factory plastic gear- Super heavy duty 1.0 Mod...

Aluminum Speed Run Wheelie Bar For Associated DR10FEATURES:- CNC Machined aluminum construction- mm in length with an 0 to 10 deg adjustable angle,- Side or center wheel setup options, and a solid...

Hot Racing Aluminum Vertical Shock Mounts Team Associated DR10This rear shock mount alters the shock geometry, placing the shocks in a more vertical position to improve rear weight transfer at launch...

Hot Racing light weight aluminum differential locker (spool) for the gear differential in the Team Associated DR10, Pro SC10 and Trophy RatFEATURES:- CNC machined aluminum construction- Anodized blue...

Hot Racing optional upgrade aluminum High Clearance Links link set for 5.26" (133.7mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 with LWB by upgrading your stock plastic links with...

Hot Racing optional upgrade heavy duty front splined star drive CVD axle kit for the Losi Rock ReyFEATURES:- CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle-...

Hot Racing aluminum 29mm differential carrier (case) for the 1/8, 1/7 Arrma Fits the front, center, or rear differential. See vehicle model compatibility in comments below.FEATURES:- CNC machined...

This is the Hot Racing Twin Twister Blower desigen to fit on Arrma heat sink ARA390296 wich comes with 1/5 ArrmaFEATURES:- Forced airflow over motor heat sink to increase cooling for improved...

Hot Racing aluminum triple bearing support rear hubs with carbon fiber link tabs for the 1/5 ArrmaFEATURES:- CNC machined aluminum construction, anodized black- Double shear 5mm carbon fiber link...

This is a Gold Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES:Gold Anodized Aluminum constructionYOU WILL RECEIVE:One heat sinkREQUIREMENTS:Take off all motor stickerSlide...

Hot Racing dirt guard chassis cover for the 1/10 scale Traxxas Rustler. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a...

Hot Racing 34T Mod-1 Pinion Gear for use on 1/8 Scale Cars.FEATURES:Hardened steel constructionBlack in colorYOU WILL RECEIVE:One 34T Mod-1 Pinion GearOne 5x5mm Set ScrewREQUIREMENTS:Installation on...

Hot Racing optional upgrade heavy duty Long splined star drive axle kit for 1/10 Arrma 4X4 vehicles 4S. See comments below for specific vehicle fit information.FEATURES:- Replaces stock diff...

Hot Racing aluminum threaded rear shock bodies 1/10 Arrma 4X4 4S BLX vehicles. See vehicle compatibility in comments below.FEATURES:- Threaded shock bodies for easy, precise, and consistent...

This Is A Full M1.4 Screw Kit set for Stock Axial 24 from Hot RacingFEATURES:stainless SteelYOU WILL RECEIVE:Screw Set total 81 pieces of screwsRH M1.4 X5 mm Round Head Screw (48 pieces)RH M1.4 X8 mm...

Hot Racing chassis frame conversion for the Axial SCX24 vehiclesFEATURES:- CNC machined aluminum construction- Anodized black with secondary-processed machined beveled edges for outstanding looks-...

These are Brass Hex Wheel Hubs for the SCX24FEATURES:CNC Machined Solid Brass construction.YOU WILL RECEIVE:Four Hex Wheel HubsFour 2 x 6mm Axle PinsREQUIREMENTS:Assembly onto SCX24...

Hot Racing 54-tooth 0.8 metric pitch (compatible with 32-pitch) aluminum spur gear for the Traxxas Jato 3.3, Rally VXL, Slash 4X4, Stampede 4X4, and T-Maxx 3.3 with slipper clutch...

Hot Racing #45 Steel 28T Mod1 Light weight Spool Gear allows you to fine tune the gearing of your Limitless vehicleFEATURES:- light weight designs reduce rotational mass at the axle, optimizing...

Hot Racing 050 High Torque motor with 11T brass gear for Axial SCX24.SPECIFICATIONS:High Torque Magnet and RotorTuned for Rock ClimbingBrass Pinion Gear: 64P 11TRated Voltage: 7.4 VTotal length: 1...

Hot Racing 32mm internal spring damper shock set for Axial SCX24 and other custom Rock Crawler projectsFEATURES:- CNC machined aluminum shock bodies, black anodized- Precision machined mm stainless...

Hot Racing optional upgrade aluminum High Clearance Links set for 5.25" (133.5mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 by upgrading your stock plastic links with the Hot Racing...

This is a red Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES:Red Anodized Aluminum constructionYOU WILL RECEIVE:One heat sinkREQUIREMENTS:Take off all motor stickerSlide...

This is a Black Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES:Black Anodized Aluminum constructionYOU WILL RECEIVE:One heat sinkREQUIREMENTS:Take off all motor...

Hot Racing super duty steel 0.5 Mod 60T spur gear for 1/18th th scale Losi 2WD Mini-T2 vehicles,-Steel construction for total reliability when using high power brushless systems-CNC machined and...

This is a set of optional Hot Racing threaded aluminum shocks for the Losi Mini-T 2 from LosiFEATURES:- CNC machined 6061-T6 shock bodies, caps, spring adjusters (collars), and spring retainers-...

Hot Racing Aluminum flush fit skid plate mount AONFEATURES:- CNC 6061-T6 Aluminum construction- Anodized Red- For a flush fit when useing AR320432 with AON331M08YOU WILL RECEIVE:- One Skid plate...

Hot Racing wheelie bar for the 1/8th Arrma BLXFEATURES:- Wheelie bar is 2mm stainless steel construction- Two length and 3 setting.- Ball bearing polyurethane wheelYOU WILL RECEIVE:- One (1) wheelie...

Includes: - Left and right aluminum steering knuckles - Two Bearing collars - Two 23 x 17 x 4mm Bearings  FEATURES: - CNC machined 6061-T6 aluminum construction - Triple bearing support...

Black aluminum Rear Shock Mount for the 1/16 Traxxas Revo.  FEATURES: CNC Constructed of 6061-T6 aluminum, black anodized. YOU WILL RECEIVE: One Rear Shock Mount for the 1/16...

Hot Racing steel helical spiral Underdrive 35T/10T gear set for 1/10 Traxxas TRX-4FEATURES:- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than...

Hot Racing steel helical spiral overdrive 33T/12T gear set for 1/10 Traxxas TRX-4FEATURES:- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the...

Hot Racing aluminum outer portal drive housings for the Traxxas TRX-4 front or rear axles FEATURES: - CNC machined 6061-T6 aluminum - Anodized black with laser engraved lettering YOU WILL...

Hot Racing Aluminum Diamond plate Rear bumper with LED light buckets and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper, anodized...

Hot Racing optional super duty slipper system with pressure plate, slipper hub, and metallic friction pad for the 1/10 Traxxas E-Maxx, E-Revo, Rally, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede...

Hot Racing Power Up Slipper Eliminator Gear Adapter for the 1/10 Traxxas E-Maxx, E-Revo, Rally, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, Summit, and T-Maxx 3.3. FEATURES: -...

Hot Racing aluminum Heavy Duty fixed steering link and locked servo arm for the Traxxas 4 Tec 2 FEATURES: - Gives precise fit to lock on to the servo 25 spline - 6061 aluminum links, Black...

Hot Racing light weight hard anodized aluminum 83 tooth, 48 pitch spur gear for the Traxxas Bandit, 2WD Slash, Rustler, and 2WD Stampede vehiclesFEATURES:- CNC machined 6061-T6 aluminum construction-...

Aluminum Speed Run Wheelie Bar For Traxxas 2WD LCG Slash, Rustler, BanditFEATURES:- CNC Machined aluminum construction- 180mm in length with an 0 to 10 deg adjustable angle,- Side or center wheel...

Hot Racing dirt guard chassis cover for the 1/10 scale Traxxas 2WD Slash with the Low Center of Gravity (Low-CG, LCG) chassis. The chassis cover attaches to the chassis with easy-to-apply hook and...

Hot Racing 120mm internal spring air damper shock set for rock crawlers or other custom projectsFEATURES:- CNC machined aluminum shock bodies, black anodized- CNC machined aluminum upper shock cap...

.

Hot Racing aluminum servo mount bracket for use with Emax ES08MA Metal Gear servo the Axial SCX10 24FEATURES:- CNC machined billet aluminum, anodized black- Securcre servo mount over stock plastic...

Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for use with Axial SCX 24FEATURES:- Billet CNC machined aluminum- Anodized a stylish flat black- Integrated...

Hot Racing aluminum front bumper mount frame crossmember for the Axial scx24 C-10 vehicles.FEATURES:- Stronger and more rigid than factory plastic cross-member for a more rigid frame and more...

Includes: - One (1) 51T output gear (Replaces stock Traxxas plastic 7784 output gear) FEATURES: - CNC machined and hardened steel - Black oxide finished - Replaces stock plastic...

This is a Hot Racng Traxxas TRX-4 5mm Wide Track spring Steel Stub Axle, to gain clearance for larger front tires. Plus, 10mm track width increase makes the truck more sure footed in Rough terrain ...

Hot Racing light weight hardened steel 62 tooth, 48 pitch spur gear for the Traxxas 4 TEC 2 vehicles FEATURES: - CNC machined and lightened hardened steel construction - Replaces stock nylon...

Hot Racing optional upgrade heavy duty Steel Universal Axles Drive Shafts for Losi 2WD Mini-T2 vehicles.FEATURES:- Heavy duty CNC machined S2 spring steel wheel stub shafts- Replaces factory Dog bone...

Steel Cv with Steel Hub La Trax Rally Teton FEATURES: - Heavy duty CNC machined #45 hardened carbon steel construction - Hardened steel Key hubs - Black oxide coated steel aids corrosion...

Hot Racing optional upgrade heavy duty splined star drive axle kit for the Traxxas 4WD electric Stampede, Slash FEATURES: - CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum...

Hot Racing optional 45 tooth, 0 .6 Module hardened steel spur gear for multiple 1/18 Dromida vehicles. See list below for vehicle compatibility.FEATURES:- CNC hardened steel constructionYOU WILL...

Hot Racing 18mm wheel hub extensions with 12mm hex for the Axial SCX10, SCX10 II, and Wraith Crawler FEATURES: - Extends the track width for a wider stance and greater control and stability -...

Hot Racing 1/10th scale rear bumper with tow shackle D-rings, LED light mounts, and winch mount for the Axial SCX10 FEATURES: - CNC machined solid billet aluminum construction - Feels very...

Optional Hot Racing Hardened Steel 32P 57T Spur Gear for use on the Arrma 1/10 2WD Specially make to handle brushless power FEATURES: Hardened steel construction Rugged 0.8...

Hot Racing hardened steel 16 tooth, 32 pitch pinion gear for motors with a 5mm shaftFEATURES:- CNC machined- Hardened steel to increased wear resistance and improve fatigue life- Nitrided to enhanced...

Hot Racing 21T, 0.6 module (~42P) steel pinion gear for 5mm or 1/8in motor shaftsFEATURES:- CNC machined steel with black Nitride finish- Heavy duty 4mm set screw- Long design for maximum motor shaft...

Hot Racing solid aluminum toe links (aka steering turnbuckle) for the Traxxas Maxx 4SFEATURES:- More rigid than factory plastic links for more predictable and consistent steering- CNC machined...

Hot Racing aluminum front steering blocks (left and right) for the 1/10 Traxxas MaxxFEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges- Laser etched lettering- Replaces...

Hot Racing aluminum Front Lower arms for the Losi 2WD Mini-T2.FEATURES:- CNC machined aluminum, anodized black.- Replaces worn stock black plastic Front Arm- Precision made for perfect bolt-on fitYOU...