Hot Racing

Hot Racing 40 tooth, 1.0 Mod spur gear for the Traxxas Revo 3.3 and Slayer Pro 4X4FEATURES:- CNC machined and hardened steel construction- Upgrades factory plastic gear- Super heavy duty 1.0 Mod...

Hot Racing dirt guard chassis cover for the 1/10 scale Traxxas Rustler. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a...

Hot Racing 54-tooth 0.8 metric pitch (compatible with 32-pitch) aluminum spur gear for the Traxxas Jato 3.3, Rally VXL, Slash 4X4, Stampede 4X4, and T-Maxx 3.3 with slipper clutch...

Includes: - Left and right aluminum steering knuckles - Two Bearing collars - Two 23 x 17 x 4mm Bearings  FEATURES: - CNC machined 6061-T6 aluminum construction - Triple bearing support...

Hot Racing steel helical spiral Underdrive 35T/10T gear set for 1/10 Traxxas TRX-4FEATURES:- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than...

Hot Racing steel helical spiral overdrive 33T/12T gear set for 1/10 Traxxas TRX-4FEATURES:- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the...

Hot Racing aluminum outer portal drive housings for the Traxxas TRX-4 front or rear axles FEATURES: - CNC machined 6061-T6 aluminum - Anodized black with laser engraved lettering YOU WILL...

Hot Racing Aluminum Diamond plate Rear bumper with LED light buckets and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper, anodized...

Hot Racing optional super duty slipper system with pressure plate, slipper hub, and metallic friction pad for the 1/10 Traxxas E-Maxx, E-Revo, Rally, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede...

Hot Racing Power Up Slipper Eliminator Gear Adapter for the 1/10 Traxxas E-Maxx, E-Revo, Rally, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, Summit, and T-Maxx 3.3. FEATURES: -...

Hot Racing aluminum Heavy Duty fixed steering link and locked servo arm for the Traxxas 4 Tec 2 FEATURES: - Gives precise fit to lock on to the servo 25 spline - 6061 aluminum links, Black...

Hot Racing light weight hard anodized aluminum 83 tooth, 48 pitch spur gear for the Traxxas Bandit, 2WD Slash, Rustler, and 2WD Stampede vehiclesFEATURES:- CNC machined 6061-T6 aluminum construction-...

Aluminum Speed Run Wheelie Bar For Traxxas 2WD LCG Slash, Rustler, BanditFEATURES:- CNC Machined aluminum construction- 180mm in length with an 0 to 10 deg adjustable angle,- Side or center wheel...

Includes: - One (1) 51T output gear (Replaces stock Traxxas plastic 7784 output gear) FEATURES: - CNC machined and hardened steel - Black oxide finished - Replaces stock plastic...

This is a Hot Racng Traxxas TRX-4 5mm Wide Track spring Steel Stub Axle, to gain clearance for larger front tires. Plus, 10mm track width increase makes the truck more sure footed in Rough terrain ...

Hot Racing light weight hardened steel 62 tooth, 48 pitch spur gear for the Traxxas 4 TEC 2 vehicles FEATURES: - CNC machined and lightened hardened steel construction - Replaces stock nylon...

Hot Racing optional upgrade heavy duty splined star drive axle kit for the Traxxas 4WD electric Stampede, Slash FEATURES: - CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum...

Hot Racing solid aluminum toe links (aka steering turnbuckle) for the Traxxas Maxx 4SFEATURES:- More rigid than factory plastic links for more predictable and consistent steering- CNC machined...

Hot Racing aluminum front steering blocks (left and right) for the 1/10 Traxxas MaxxFEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges- Laser etched lettering- Replaces...

These are the optional Hot-Racing Long Slipper Clutch Pads for the Traxxas Rustler and Stampede.     FEATURES Constructed of hard...

Hot Racing large heavy duty CNC machined hard anodized aluminum slipper pressure plate and hub for multiple Traxxas vehicles. This slipper system can accommodate three long Hot Racing slipper pads...

This is the the optional Hot-Racing 90T 48P Aluminum Spur Gear for the Traxxas Electric Stampede and Rustler series.     FEATURES CNC...

This is the Hot Racing Ball Bearing Equipped Steering Bellcrank for the Traxxas 2WD Slash, Rustler, and Bandit.     FEATURES 6061...

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate for the Traxxas 1/10 Bandit, Rustler, 2WD Stampede, and 2WD Slash.     FEATURES ...

These are the optional Hot-Racing 12mm Wheel Hexes for the 1/10 scale 2WD Traxxas Slash, Rustler and Stampede. **Will NOT fit the 4WD Traxxas Slash**     ...

This is the Hot-Racing 75T 48P Hardened Steel Spur Gear for the Traxxas 2WD Bandit, Slash, Electric Rustler and Electric Stampede.     FEATURES ...

This is the the optional Hot-Racing 73T 48P Steel Spur Gear for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede and Telluride.     FEATURES ...

This is the the optional Hot-Racing 72T 48P Steel Spur Gear for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede and Telluride.     FEATURES ...

Hot Racing optional upgrade heavy duty splined star drive axle kit for the Traxxas 2WD electric Stampede and electric Rustler FEATURES: - Heavy duty CNC machined #45 hardened carbon steel...

This is the Hot Racing 18T/60T Pinion and Spur Gear Set for the 2WD Traxxas Bandit, Rustler, Slash and Stampede.     FEATURES CNC...

These are the optional Hot-Racing Speed Tuned Pinion Gears for the Traxxas Slash 4x4.     FEATURES CNC machined 6061 aluminum Hard...

These are the Hot Racing 12mm Wheel Hex Extensions.     FEATURES Aluminum construction, silver in color Fits the 5mm diameter axles on...

These are the optional Hot-Racing Ball Type Aluminum Shock Ends. for the Traxxas Revo 3.3     FEATURES Aluminum construction, silver...

Hot Racing universal clip on motor heat sink and fan for use on 540 and 550 size motors. Versatile two-piece heat sink clip provides 8 different width adjustments.  FEATURES: - Keeps the...

This is the Hot-Racing Aluminum Inner Roll Cage for the Traxxas for use on the 1/10 Rally, or LCG Slash 4x4.     FEATURES Aluminum...

This is the Hot Racing Aluminum Rear Bumper for the Traxxas E Revo 2FEATURES:CNC Constructed of aluminum anodized Black in colordesign with LED light holder on each sideYOU WILL RECEIVE:One Aluminum...

Hot Racing CNC machined billet aluminum Center Skid Plate for the Traxxas E-Revo 2.0FEATURES:- CNC machined billet aluminum Center Skid Plate Anodized Black- Replaces factory plastic skid plateYOU...

Hot Racing optional upgrade heavy duty Center Drive Cv Splined Shaft E-Revo, E-Revo 2 Summit FEATURES: - CNC machined #45 hardened carbon steel and Aluminum construction - Replaces factory plastic...

Replace the stock plastic body posts on your Traxxas E-Revo 2.0 with this good looking aluminum front body mount from Hot Racing FEATURES: - Aluminum construction, black in color YOU WILL...

Hot Racing optional upgrade heavy duty splined star drive axle kit for the Traxxas electric Stampede 4x4 Slash 4x4 Rustler 4x4 and 2WD SlashFEATURES:- CNC machined #45 hardened carbon steel, S2...

Hot Racing heavy duty splined star drive CVD axle kit for the front or rear of the Traxxas 1/10th scale MaxxFEATURES:- CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and...

Blue Hot Racing single arm servo arm for Traxxas TRX-4 FEATURES: CNC Aluminum construction,  Anodized Blue in color one diameter linkage holes YOU WILL RECEIVE: one blue single arm...

Hot Racing 17mm Splined Hubs aluminum wheel hexes for the front and rear of the 1/10th Traxxas Maxx 4WD vehicles..FEATURES:- 6061 aluminum construction- Blue in color- Fits 1/10th Traxxas Maxx 4WD...

Hot Racing 17mm extra large serrated wheel nuts for the Axial Yeti XL RTR and Arrma 1/10 4X4 4S BLX, Traxxas Maxx 1/10These wheel nuts looks great and will lock the wheels in place with the large hex...

Hot Racing machined aluminum Transmission case Output Gear Cover for the Traxxas TRX-4 vehiclesFEATURES:- CNC machined aluminum construction- Replaces factory plastic Transmission case Gear Box...

Hot Racing S2 hardened spring steel portal drive stub axles for the Traxxas TRX-4FEATURES:- CNC machined S2 hardened spring steel- Upgrades stock axles or provides a replacement for worn or damaged...

Hot Racing 54 tooth hardened steel Modulus 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES:- CNC machined hardened steel construction- Black oxide...

This is the optional Hot Racing stainless Steel armor skid plate is the ultimate protection from any rock strikes.  For the front or rearof Traxxas TRX4 FEATURES: Formed from a single...

This is the optional Hot Racing stainless Steel Center armor skid plate is the ultimate protection from any rock strikes.  For the center of Traxxas TRX4 FEATURES: Formed from a...

Hot Racing aluminum sealed differential case with Hardened steel cog differential gear for the 2WD Traxxas Stampede, Rustler, Bandit, 2WD Slash, and Monster Jam vehiclesFEATURES:- CNC machined...

Aluminum front bumper with stinger, LED light buckets, winch mounting pattern, and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper, anodized...

Hot Racing optional hop-up ICE Cube Style rock rail side step for the Traxxas TRX-4 FEATURES: - CNC Billet machined aluminum construction - Anodized black with aluminum ICE Cube Style on...

Hot Racing aluminum Grille Guard for TRXF03CF01 with LED light buckets, for the Traxxas TRX-4  FEATURES: - CNC machined billet aluminum bumper, anodized semi-flat black - Pre-drilled mm...

Hot Racing optional upgrade heavy duty spline star drive axle kit for SCX II and TRX4 FEATURES: - CNC machined #45 hardened carbon steel and Aluminum construction - Replaces...

Hot Racing aluminum steering bellcrank for the 1/18th scale LaTraxx Rally, SST, and Teton. FEATURES: - CNC machined aluminum, anodized black and silver - Factory assembled...

Hot Racing's optional carbon fiber rear rocker arm mount plate set for the Hot Racing GVXS27RX or VXS27RX rear rocker arms on the Traxxas 1/16 E-Revo VXL or 1/16 Slash. FEATURES: - Carbon...

Hot Racing differential spool locker for the 1/10th scale Traxxas Bandit, 2WD Electric Slash, Ford Raptor, Electric Rustler, and 2WD Electric Stampede truck. This part replaces the differential gears...

This is the optional Hot Racing Aluminum Brake Disc Add-On for Traxxas 1/16 Revo FEATURES: Gives the center of your wheel the cool look of a high performance brake disc Silver colored...

Hot Racing dirt guard chassis cover for the 1/8 scale Arrma Nero and 1/10 scale Traxxas E-Revo 4X4. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper...

FEATURES: -Robust CNC machined 6061 aluminum -Added fastener points to secure, lock, and secure gear mesh -Replaces the stock plastic bulkhead for increased durability -Silver...

This is the Hot Racing 86T/48P Spur Gear for the 2WD Traxxas Bandit, Rustler, Slash and Stampede.     FEATURES CNC machined and...

FEATURES: - Heavy duty CNC machined #45 hardened carbon steel construction - Replaces factory plastic drive axles - Red anodized aluminum pin capture rings with rubber o-rings to prevent...

This is the Hot Racing Monster Blower Motor Heat Sink Fan for the Traxxas X-Maxx. FEATURES Clamps to the stock motor heat sink Uses...

This is the Hot Racing Heavy Duty Slipper Pressure Plate and Hub for the Traxxas X-Maxx. FEATURES CNC machined hard anodized aluminum...