Tamiya

This Tamiya R/C car kit recreates the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is...

This 1/10 scale R/C assembly kit recreates the Opel Kadett GT/E on the versatile MB-01 chassis platform. The MB-01 chassis for this subject is configured in the long wheelbase and midship rear motor...

This is a re-release of the iconic Egress 4WD off-road racing buggy. The Egress first appeared in 1989. It was a follow up kit to the Avante kit, which had a huge fan following. The original Egress...

FEATURES These lights are for brake lights (one left and one right) andturn signal (or "blinker") lights (one left and one right). Thebulbs are clear and installed behind the brake and turn...

DESCRIPTIONThe Buggy Champ's distinct body shape is reproduced with a durable plastic shell.Screws & nuts, stickers, and two extra lights for the body are included.

DESCRIPTIONIt’s back, and ready to obliterate unfriendly terrain just like before! This time, the Tamiya Super Clod Buster appears as a special Black Edition, with new colors for the body and...

3585115 1/14 RC Grand Hauler Tractor Trucks - Muffler Cover

This assembly kit R/C truck features a stylish body inspired by the breathtaking, exciting low form of U.S. stadium racing trucks. Made from lightweight and durable polycarbonate, it features a rear...

This large-scale R/C assembly kit recreates the Volvo FH16 Globetrotter XL 750 4x2 Tractor. The FH16 series is the flagship of Swedish manufacturer Volvo Trucks, and it was the result of a model...

Re-release of a Commemorative R/C ModelThe Top-Force R/C assembly kit, originally produced in 1991, commemorated Tamiya's 100th R/C product release. Lessons learned in actual race events,...

Hotshot II is back! This is an updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987, following Tamiya’s first 4WD buggy (Item 58047) Hotshot released in 1985...

This kit is an updated version (this time, the body is pre-cut and pre-painted in sliver) of the Super Sabre, the original of which was released as Item 58066 in 1987. The Boomerang is a brother...

This assembly kit creates an R/C model of the German Tank Panzerkampfwagen IV Ausf.J. Late WWII German forces had great expectations for the incoming Panther, which was due to replace the...

This is a limited-edition version of the 2002 Mercedes-Benz CLK AMG Racing Version (Item 58722) kit with pre-painted, pre-cut body and wheel arches, great for not only beginners but also veterans.The...

This R/C car made a name for itself when it was originally released in 1990 for being popular as both a beginner-level off-road buggy and an easily upgradeable car for veteran radio control hobbyists...

This slim 1mm masking tape can be used on subjects such as plastic and R/C models. PET plastic covers help prevent distortion and allow minimal dust to settle on the tape for superior longevity. The...

Tamiya continues to develop its 1/16 R/C Tank Series. The fourth full-option kit to make its appearance is the German Heavy Tank King Tiger. Not only can the model move forward and backward and turn...

.

9805049 RC Rear Tires (2Pcs) for 1/10 Buggy Champ 2009

The XV-02 RS chassis is an on-road variant of the rally XV-02 platform. The kit is mainly oriented for on-road, and features updates such as dedicated 3.5mm thick carbon fiber damper stays,...

The 1980’s was the decade of the hot hatch back in automotive circles! One of the many automakers that made hatchbacks popular was Volkswagen, and their MK2 GTI 16V was a favorite among automotive...

This TAMIYA high-performance rear-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with the main frame split into front and rear sections. It offers superior rear high...

This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany.Tamiya has faithfully reproduced...

Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish...

This versatile ball differential is compatible with a number of our Tamiya buggy re-issues, and gives efficient and controllable power compared to the standard bevel-gear differential.• Compatible...

The TA08PRO receives the limited-edition treatment in the form of the TA08R by adding a plethora of key Hop-Up Options right out of the box along with a few parts only available in this edition!•...

This is the White Liquid Surface Primer by Tamiya.       FEATURES Primes surface for paint adhesion     ...

This is the Liquid Surface Primer by Tamiya.       FEATURES Primes surface for paint adhesion     ...

FEATURES: Easy application.          This light gray primer has excellent coverage and is recommended...

FEATURES: Easy application.          This light gray primer has excellent coverage and is recommended...

This set of 4 high-grade TRF front/rear racing dampers have damper cylinders that feature a newly developed black-colored fluorine coating for even less friction than previous damper cylinder...

This is a 3.4oz (100ml) can of Tamiya Color Spray Lacquer for Plastic Models(TS-97 Pearl Yellow)For Adult Modelers Only.FEATURESSpecially developed for painting plastic modelsSynthetic lacquer cures...

Tamiya TS spray paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by...

Tamiya TS spray paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by...

This specific metallic gold paint is designed to simulate metallic gold surfaces used on automotive wheels etc.• For best results it is highly recommended that you use TS-14 BLACK as an undercoat...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

FEATURES Specially developed for painting plastic models Synthetic lacquer cures in a short period of time Enough to fully cover two or three 1/24 scale sized plastic model bodies Impervious...

Get the best out of your servo with these step screws, which give tighter and more secure attachment.• Aluminum Step Screws x4• Step screws cater to holes between 4.5mm and 5mm, and do not require...

When tuning up your R/C car, ball bearings are a great first step, reducing power loss in the drivetrain and increasing the longevity of axle joints when using them to replace plastic bearings. The...

These general use connectors are made from tough high-strength steel to handle the rigors of off-road racing but can also be installed in on-road chassis.Compatible Chassis: Any

★Handy spacers for use in adjusting track/tread width, etc. ★Includes four each of 0.5mm and 1mm spacers.

The surface of this aluminum ball nut is coated with a fluorine coating that has excellent lubricity. In addition to smoothing the movement of the ball connection part such as the plastic adjuster,...

This 1/10 scale R/C assembly kit recreates the Mitsubishi Pajero on the CW-01 chassis. After the announcement of its concept car at the Tokyo Motor Show in 1973, the Mitsubishi Pajero was one of the...

This R/C model assembly kit recreates the classic FIAT 131 Abarth Rally Olio Fiat on the easy to assemble and drive MF-01X rally chassis platform. The Fiat 131 Abarth Rally developed from the Fiat...

This is a great-value 12-pack of the new-spec Power Champ RX batteries, which offer greater power and improved discharge performance compared to their Power Champ RS predecessors. The Power Champ...

This modeling drill chuck handle comes in very handy in times where a normal pin visedoes not have what it takes to do the job and where an electric drill is too powerful. Comes with a easy...

Tamiya R/C car bodies are among the most detailed replicas available. You can now further enhance the scale look by adding depth with the use of this panel line sticker.• Sticker Sheet x1• The sheet...

DESCRIPTIONDurable clear polycarbonate body captures the distinctive shape of the Lancia Delta Integrale.Sticker sheet and masking seals included.Metal plated H parts (front grille) and J Parts...

The Buggy Champ, which started the "Buggy Boom" when it was released in 1979, now comes back as a new and improved version. It keeps true to the basic layout of the original while incorporating...

9805459 RC GEAR SHAFT (A&B) FOR 56307/05

9805456 RC TIRE (2) FOR 56307/06/05/04/03

9402874 1/14 RC Grand Hauler Tractor Trucks - Metal Parts Bag F

9402873 1/14 RC Grand Hauler Tractor Trucks - Metal Parts Bag E

9335128 RC GEAR BAG FOR 56307/56305/56304

9335126 RC U PARTS FOR 56304/56301

9115424 RC Grand Hauler R Parts

9115047 RC J PARTS FOR 56307/56305/56304

These are the axle parts which are used in Tamiya"s TLT-1 Rockbuster and Max Climber kits. This axleparts set allows the RC modeler to get to know the vehicle"s mechanics in more detail and allow a...

6274007 RC GP Rubber Cap for GP Racing Truggy

This ball bearing set is for the Tamiya Semi-Truck series of R/C vehicles. The set can be used in place of the kit standard metal bearings to decrease drivetrain friction/noise and facilitate longer...

This TAMIYA LED product allows you to light up longer R/C truck models. They are compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to...

This sticker set allows you to customize the look of your semi-tractor and semi-trailer truck.• Stickers depict markings, which are seen on European trucks.• Contains a range of stickers to depict...

This body parts set recreates the Fiat Abarth 1000 TCR Berlina Corse. It is made of polycarbonate with detail pieces made of PC-ABS plastic.• Lightweight and durable polycarbonate body.• Use 55mm...

This is a spare body parts set that recreates the Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. It fits on many of Tamiya’s 190mm width, standard wheelbase chassis machines.• Features lightweight...

This body parts set recreates the Volkswagen Golf II GTI 16V Rally. It is made of polycarbonate with detail pieces made of PC-ABS plastic.• Lightweight, durable polycarbonate body.• Separately molded...

1/10 Clear Body Set CC-02 Land Cruiser 300 Feature:For: Tamiya CC-02Material: PolycarbonateColor: ClearClear protective film to prevent overspray: YesPre-drilled mounting holes: NoInclude:Tamiya...

This is a clear polycarbonate body parts set of the au TOM's GR Supra. It is made out of 1mm thick polycarbonate. The set includes masking seals for the windows and a sticker set to finish the GT...

This is a spare front a rear wing set molded in black for Tamiya’s original design 2017 Formula One body. Its design is influenced by the 2017 Formula One regulations and dimensions.Package...

This is a spare front a rear wing set molded in white for Tamiya’s original design 2017 Formula One body. Its design is influenced by the 2017 Formula One regulations and dimensions.Package...

The is a spare body parts set of the Mercedes-AMG GT3. The body can be fitted on Tamiya 190mm wide touring car machines.• The Mercedes-AMG GT3 form is recreated in polycarbonate. Length: 453mm.•...

50927 RC 1/10 Clear Body Set Mitsubishi Lancer Evo. VII 190mm Touring Car

50596 RC 5mm Adjuster (6Pcs) for TGX-Mk.1 TS - 44002

50590 RC 4mm Ball Connector (5Pcs) for TGX-Mk.1 TS - 44002

50588 RC 2mm E-Ring (15Pcs) for TGX-Mk.1 TS - 44002

3545010 RC 20T GEAR FOR 56307/56305/56304

3485215 1/14 RC Grand Hauler Tractor Trucks - Propeller Shaft Long

Our Hop-Up Option series welcomes a third racing wing set, designed to be used on Tamiya touring and sports car bodies. This item includes two types of low-drag wings, and different-size wing...

0445563 RC 4mm Adjuster Black

0445258 RC V PARTS: 56307/06/05/04/03

0225105 1/14 Truck Knight Hauler - X Parts

0005471 1/14 Mercedes-Benz 1838Ls - E Parts

0005467 1/14 RC Globe Liner Tractor Truck - A Parts

This is a Limited-Edition Radio Control kit of the 1990 Land Rover Defender 90. Unlike item 58700, this version includes a pre-painted body in light blue!The Defender 90 is a legendary Land Rover...

9400832 RC Tool Bag for Toyota Tundra Highlift (58415)

This airbrush stand will help with painting in your work area. The stand consists of a tray-type base and two airbrush hangers which enable placement of two airbrushes at the same time and is...

This is another handy cutting tool for the advanced modeler’s armory. These side cutters are for use in cutting materials which standard side cutters cannot cut or would not cut cleanly. Examples of...

These versatile scissors are a must-have addition to every modelers' tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model...

These bending pliers are perfect for small photo-etched parts which have no identifiable bending lines. The flat tip of these pliers will give any modeler peace of mind as even if the PE parts are...

Ideal for not only small decals but also capable of delicately holding larger decals without damaging them. Larger decals can be easily held by the lower part of the tip, while smaller ones can be...

This tool for 2mm E-rings is extremely useful during construction and maintenance of R/C models. The unique shape of the specially designed tip makes it easy to attach and remove tiny E-rings.

These Tamiya Decal Scissors are made of high-quality carbon steel and are perfect for cutting decals, found inside Tamiya plastic model kits. The sharp carbon steel and fine point makes it easy for...

This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly...

These quality long nose radio type pliers with cutter will come in handy during radio control kit construction. Durable steel construction with quality finish ensures long life. The cutter is capable...