Tamiya

The key to speed with Mini 4WD racing is efficiency. Use this item to keep ball bearings and eyelets, etc. rotating smoothly.• This bearing lubricant oil is useful to lubricate ball bearings and...

This new easy to apply grease for Mini 4WD cars comes in a 3g tube and can be applied to the gears, drive shafts, and other moving parts via a thin nozzle (included) for easy application. Even in hot...

Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a...

Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a...

This limited-edition release of the double-shaft Hyper-Dash Motor PRO (Item 15375) has a label and packaging commemorating Japan Cup 2023. It is a balanced, high-performance motor, equally at home on...

This limited-edition release of the double-shaft Hyper-Dash Motor PRO (Item 15375) has a label and packaging commemorating Japan Cup 2023. It is a balanced, high-performance motor, equally at home on...

The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any...

This R/C model assembly kit recreates the Toyota Celica GT-Four (ST165) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02...

Fit these hi-spec shock dampers to ensure that your buggy can take on seriously tough off-road surfaces! They are refined versions of the tried and tested design in Item 53926 RC DF03 Alum Oil Damper...

This Tamiya aluminum adjustable servo horn allows you to finely tune your racing cars chassis steering geometry. You will be able to tune the steering range by raising or lowering the height of the...

Further improve the reliability of your hi-specification chassis with this aluminum differential unit cover, which boosts the durability of the differential casing.Comes in a blue anodized finish...

Get the balance and set-up of your R/C model adjusted exactly how you want it with these handy ballast weights, which are intended for use in cars fitted with separate type battery packs (saddle...

These spacers are designed to gain even greater precision in your touring car model tread setup (the width between the wheels), with these 0.75mm spacers.Contains Aluminum Wheel Spacers x8Altering...

These option part springs are available to further upgrade items 54504/54505 Buggy Big Bore Aeration Dampers. 3 varieties of hardness are included to allow racers to tailor their car's suspension to...

Item 51287 Large Ball Diff Plate was produced as the stock replacement diff ring part for many of Tamiya"s R/C car chassis. This new option version has been produced with a more durable alloy...

54262 RC TRF201 Reinforced 52T Ball Diff Gear Set

Customize your FF-03 chassis ma-chine with these durable 3/32 Tungsten Ball(12pcs.) set.3/32 Tungsten Ball x 12pcs

These 48 Pitch Pinion Gears feature newly designed teeth to reduce both noise and friction loss.Each pinion gear features two grub screw attachment holes to allow you to choose the best attachment...

These 48 Pitch Pinion Gears feature newly designed teeth to reduce both noise and friction loss.Each pinion gear features two grub screw attachment holes to allow you to choose the best attachment...

This new high precision Reinforced Freewheel Axle Set reduces rotating mass, which will give you faster acceleration.

Titanium coat protects piston rod from dust and debris for consistent, smooth movement.

Improve your off-road R/C buggy's suspension with this set of high-grade dampers. These aeration-type dampers feature a hard black coating to increase durability and reduce friction. Efficiency is...

Compatible Chassis: TRF415MS, TB Evolution IV Titanium coated shafts extend the wear life cycle of suspension parts.

These are Tamiya aluminum spacers of various thicknesses. They can be used on all of Tamiya’s modern on-road & off-road cars, for the purpose of adjusting various suspension components.For...

Ball bearings are an ideal first step to tune your model, providing more efficient power for a longer-lasting, smooth drive.★Outer diameter: 11mm★Inner diameter: 5mm★Thickness: 4mmCompatible...

The 1150 (5x11mm) ball bearing is the most commonly used size that can be used in the vast majority of Tamiya R/C kits. This specific set uses rubber seals to help keep debris from the ball bearings...

Slipper clutches are an essential tuning part in off-road 2WD vehicles. They help protect the drivetrain from sudden surges and help tune the vehicle on slippery surfaces. This slipper clutch is...

This aluminum servo stay can be used to replace the standard resin/plastic parts on the BB-01 off-road chassis. The aluminum servo stay provide increased rigidity and sharper steering response by...

These aluminum front steering uprights can be used to replace the standard resin/plastic uprights on the BB-01 off-road chassis. Aluminum uprights provide increased rigidity and sharper steering...

These are carbon steel dogbone shafts for use on the BB-01 off-road chassis. They are part of the universal drive line. Use them in place of the standard dogbones for increased durability.• Dogbone...

These are replacement slipper clutch pads for item 22031-TD4 Slipper Clutch Set. Use this Hop-Up Option to keep your TD4 slipper clutch in peak condition.• One set includes two slipper clutch pads.•...

This is a Hop-Up Option is for use with the TD4 chassis. The rigid aluminum differential nut allows precise adjustment of ball differentials used on the kit. A precision differential screw is...

This Modeler"s Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter"s blades are made with hardened carbon steel and will remain...

The Tamiya TT-02 and later TT-02B variant (B-standing for buggy off-road kits) chassis are among the most beginner friendly R/C products in our line-up. The TT-02BR chassis is an upgraded version of...

Tamiya's First R/C BuggyThis is a re-release version of the 1/12 scale R/C XR311, Tamiya's first R/C model with a suspension system, which was originally released in 1977. While maintaining the basic...

This is an adjustable wind-deflector type roof spoiler designed for Tamiya"s 1/14 scale radio controlled Tractor Trucks. The realistic Roof Spoiler not only enhances appearance but is also functional...

DESCRIPTIONThis is a special edition of the R/C Mercedes Benz Arocs tipper truck kit (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option...

This is an unpainted version of the body parts for the Lunch Box Mini (Item 57409). If you damaged your body with crazy wheelie driving, or just want an alternative paint job to the pre-painted...

DESCRIPTIONThis wing set is made of 0.7mm-thick polycarbonate. The wings are compatible with any Tamiya touring or sports car body that has space available to make wing attachment holes. Whether it’s...

This is a Rear Wing Set for TRF201 chassis.Set includes Rounded/Wide and Straight/Narrow type rear wings. (1 each.)Adjustable down force cut line implemented.Can be used with TRF201, DB01, and TRF511...

DESCRIPTIONThis is a Tamiya spare body set of the FORD Mustang GT4. It is designed to fit in any of Tamiya’s 190mm wide touring car machines.• Made from lightweight yet durable polycarbonate.• Front...

DESCRIPTIONThis is the first type of grease in its range for damper use. It ensures a smooth sliding action for the dampers and prevents oil leaks from the O-rings. The grease color is blue and the...

JR ATOMIC-TUNED 2 MOTORDESCRIPTIONTuning your car can make the world of difference in Mini 4WD racing, and the motor is a great place to start. This motor is aimed at racers who are new to tuning...

JR HYPER-DASH 3 MOTORDESCRIPTIONThis is the Hyper Dash 3 motor and it is a newest of the popular Hyper-Dash series. Silver/carbon mix material brushes offer an excellent balance of performance and...

FEATURES: High quality, easy to use performance...

FEATURES: High quality, easy to use performance.          Chinese and American horse hair bristles.         ...

FEATURES: Stainless steel tool is designed for stirring bottled paints and for             blending different color shades...

Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a...

Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a...

This Tamiya R/C kit recreates the classic 1992 Audi V8 Touring from 1992. We have faithfully recreated this classic racing car with a detailed polycarbonate body and mated it with our entry-level and...

Tamiya is no stranger to recreating classic cars from different eras! This specific kit recreates a true classic in the form of the Volkswagen Karmann Ghia. The Karmann Ghia was a stylish coupé based...

This TAMIYA R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of...

Give your super-realistic Tamiya 1/14 R/C truck a further layer of detail with these hub nuts, which have been designed to look just those on the full-size vehicles!• Hub Nut A x2• Hub Nut B x2•...

Tractor trucks rolling along highways worldwide are often seen incorporating tough protective equipment known as animal guards. Tamiya's highly realistic rendition of the animal guard greatly...

These are wheels that can be used on any of Tamiya’s 1/14 scale RC tractor Trucks. Compared to the standard kit offered color, these wheels come in white for added diversity to your rig.• Wheels x2•...

This set includes a brand new servo mount design. Fit the parts to your 1/14 scale R/C tractor truck model for greater rigidity and improved steering/shifting output from your servos.• Servo Mount...

Aluminum parts give a more authentic weighty feel when compared to kit-standard plastic parts. This coupler lever plate is a part used in the coupler unit of R/C tractor truck models, which enables...

Actual trucks used in logistics networks are often seen with plain natural metal wheels made of steel or aluminum. To depict this type of wheel, these matte finish metal-plated wheels for 1/14 scale...

These are white versions of the dedicated-on-road racing truck wheels which have previously been released as plated and black plastic parts. Use them as they are, or paint them in a color that...

DESCRIPTIONThese are wide semi-slick tires designed to be used with the Tamiya T3-01 Dancing Rider Trike kit. They offer more stability than the standard tires in the original kit.• Rear Wide...

This is a Front One-Way unit designed to be used with the front motor layout set-up of the TB-05 chassis.Advantages: This option part will provide more corner speed to the model but will also make it...

DESCRIPTIONThis is a soft compound pair of tires that offer supreme traction on mud and dirt. They are made to fit the Tamiya CC-01 (Cross Country) chassis.• Mud Block Tire x2• Features white...

This is a front one-way unit designed to fit the TA-07. The front one-way mechanism provides no braking force to the front wheels when brakes are applied to slow the car down. In turn, all the...

This sheet includes a variety of stickers perfect for use on 4x4 off-road vehicles

FEATURES: This GT-Tuned-Motor (25T) is a high performance electric motor            featuring replaceable brushes (standard type) to ensure a...

These are rally block tires for M-05Ra chassis.Tires x 2pcs.

These are spare slick tires for Tamiya 1/10 scale touring cars. They measure 24mm in width and will fit any Tamiya 24mm wheel.

.

This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5 turn and over, (Aftermarket brands 21.5 turn and over), and also brushed motors 23T and over. High point, neutral brake and...

Gear differential putty is used to control the differential action of gear diff units used in R/C cars that have sealed gear diff systems. When high viscosity oils are not enough to achieve the...

FEATURES: Extremely useful for painting large surfaces          The color of the lid represents the color of...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

This is Tamiya's Electric Handy Drill Assembly Kit.FEATURES: This is a ready to assemble electric handy drill for use with plastic           ...

The Tamiya RS-540 sport tuned motor is an economical high performance motorfor on- and off-road vehicles.  It will work in many Tamiya vehicles (checkinstruction manual for applicability)...

This kit lowers the CC-01 chassis by 16mm, giving enhanced stability that optimizes the chassis for on-road use by lowering the center of gravity. At the same time, parts such as the plated dish...

These dampers feature all-new parts, and their main feature is the cylinder: it has an inner diameter of 12mm, 2mm wider than that on the standard Buggy Aeration Damper. As a result, it can hold 40%...

These dampers feature all-new parts, and their main feature is the cylinder: it has an inner diameter of 12mm, 2mm wider than that on the standard Buggy Aeration Damper. As a result, it can hold 40%...

54482 RM-01 Sponge Tire Attachment Cone

The aluminum Motor Mount replaces the kit-standard die-cast metal part to ensure precision shaft attachment, thereby offering increased drivetrain efficiency. The aluminum part is anodized in blue...

The Formula-Tuned Motor (32T) is a high performance electric motor featuring replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor...

Use this special tool to measure ground clearance and suspension droop to calculate R/C cars rebound value.*Compatible chassis: All standard touring car chassis

Tamiya offers this tool to make R/C assembly easier than ever. Just fit any Tamiya brand 5mm adjuster into the wrench to easily screw into place with a minimum of force. Wrench allows direct vertical...

Optional Two-Speed for the NDF-01 Chassis. Lower first gear and taller second gear provide quicker acceleration and even higher top speeds.Optional Two-Speed for the NDF-01 Chassis. Lower first gear...

This is a dedicated, compact tool for the adjustment of your turnbuckle shafts. Features just the right thickness of material for easy adjusting. Has a stylish blue anodized finish.

53403 RC TB-01 Racing Motor Mount

Tamiya's adhesive aluminum tape is ideal for gas operated vehicles that have an exhaust pipe in close proximity to the polycarbonate body. The aluminum heat resistant tape acts as a shield and...

This handy implement will help you to attach your R/C car tires to their wheels.

This is a spare body parts set that recreates the Toyota Celica GT-Four (ST165). It fits on many of Tamiya’s 190mm width, standard wheelbase machines.• Lightweight and durable 1.0mm thick...

This body parts set recreates McLaren Senna. It is made of polycarbonate with mirror and wing detail pieces made of PC-ABS plastic.• Lightweight, durable polycarbonate body realistically captures the...

This is a clear polycarbonate body parts set of the Astute 2022. It is made out of 1mm thick polycarbonate. It may be used on the Tamiya TD2 chassis as a direct replacement body set.Item Contents• 1...

This is a clear polycarbonate body parts set of the Opel Calibra Cliff. It is made out of 1mm thick polycarbonate. The set includes masking seals for the windows and a sticker set to finish the...

This body parts set recreates the 2021 FORD Bronco. It is made of polycarbonate with detail pieces made of PC-ABS plastic.• Lightweight, durable 1.2mm thick polycarbonate body.• Separate PC-ABS H...

This is a complete polycarbonate body parts set of the Toyota GR 86. It may be fitted on various Tamiya touring car chassis platforms.• 1/10 scale R/C body parts assembly kit.• Lightweight and...

This is a complete polycarbonate body parts set of the FORD GT MKII. It may be fitted on various Tamiya touring car chassis platforms.• The ulta-honed form of the car is captured by a lightweight,...

This is a complete spare part body set of the 1991 Audi V8 Touring Car. It may be fitted on many of Tamiya’s touring car platforms.• 1/10 scale R/C body parts set assembly kit.• Polycarbonate...

Clear body set of the 1/10 NISMO R34 GT-R Z-tune.* Compatible chassis: TA05, TT-01, TGS, TNS, TB-02, TB Evolution IV, TRF415

The popular Ford Mustang GT4 Body Parts Set now comes as a painted version, which is great for those who don’t have the time or confidence to apply a paint job. This body will fit many of Tamiya’s...

Make sure that your R/C car has no gap between its polycarbonate body and urethane bumper, using this handy sponge tape! This will help protect the body from damage, prolonging its life, and even...