Rustler

Wheelie bar mount w/ LED housings (for use with #9495 Magnum 272R™ transmission) (requires light kit #3794 (2WD Rustler or Bandit) or #3694 (2WD Stampede), or #3795 light harness and #2263 BEC Y-harness (2WD Rustler, Bandit, or Stampede)Replacement...

Half shaft, external splined (steel-spline constant-velocity) (1) (fits 2WD Rustler/Stampede)Accessory part for these models:Bigfoot® No. 1Bigfoot® Officially Licensed ReplicaCraniac®Rustler VXLRustlerSkullyStampede VXLStampede

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash...

Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

Product Description Key Features Two mounting holes on the gear cover and three on the motor side Additional mounting screws that help transfer and reduce impact energy into the transmission case Molded in strong proprietary blend of nylons Fits...

FEATURES: Black plastic construction Heavy-duty design INCLUDES: One rear body mount set four 3x10mm flathead screws instructions and decals

DescriptionHave you upgraded your stock ESC to Castle’s awesome Sidewinder 4 but don’t trust double-sided tape or zip ties to “securely” attach it to the chassis? RPM has you covered! Our lightweight Sidewinder 4 ESC Cage fits in the stock...

CNC Machined Alum. Battery Hold-down Plate for Rustler/Bandit  This new CNC Machined Aluminum HD battery hold down plate for the Rustler/Bandit chassis is cut from high quality aluminum that features a larger foot print to hold down the battery...

CNC Machined Alum. Battery Hold-down Plate for Rustler/Bandit  This new CNC Machined Aluminum HD battery hold down plate for the Rustler/Bandit chassis is cut from high quality aluminum that features a larger foot print to hold down the battery...

These are the optional Hot-Racing Long Slipper Clutch Pads for the Traxxas Rustler and Stampede.     FEATURES Constructed of hard anodized CNC machined 7075 T6 Aluminum Long design...

FEATURES: Black nylon construction INCLUDES: Two Front bearing (hub) carriers Two RPM decals

FEATURES: Black nylon construction INCLUDES: Two rear bearing (hub) carriers Two RPM decals SPECS: Height: 40mm (1.58") Width at widest point: 15.4mm (0.61")

FEATURES: Constructed of plastic composite construction, black in color Replaces Traxxas part #5347,Used to connect linkages INCLUDES: Twelve RPM Short Rod Ends

FEATURES: Constructed of plastic composite construction, blue in color Replaces Traxxas part #5347,Used to connect linkages INCLUDES: Twelve RPM Short Rod Ends

Quick Notes: - RPM long rod ends replace Traxxas stock #5525 – requires stock Traxxas pivot balls FEATURES For use with all versions of the Traxxas Slash 2wd, Slash 4x4, Summit, T-Maxx,...

FEATURES: Constructed of plastic, blue in color.Connects linkage rods to suspension components INCLUDES: Twelve Long Rod Ends in black

Description RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash, electric Rustler & electric Stampede 2wd are the final link for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim...

FEATURES: Sturdy nylon reinforced plastic construction Uses all stock hardware (for mounting shocks etc.) INCLUDES: One rear shock tower SPECS: Width: 4.33" (110mm) Height: 2.75" (70mm) Thickness: 7mm

Product Description Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Description Identical in strength and performance as our #80375 Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not...

FEATURES: Plastic construction Black in color INCLUDES: One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Bandit and Nitro Stampede SPECS: Width: 3.26" (83mm) Height: 2.91" (74mm) Thickness: .27" (7mm)

FEATURES: CNC machined aluminum construction adds strength and more body height adjust-ability Six holes per postINCLUDES: Two Front Body PostsRequires:Some vehicles may require Traxxas #1914R (sold separately) check that your body posts unscrew.SPECS:...

FEATURES: CNC machined aluminum construction adds strength and more body height adjust-ability Six holes per postINCLUDES: Two Front Body PostsRequires:Some vehicles may require Traxxas #1914R (sold separately) check that your body posts unscrew.SPECS:...

FEATURES: CNC machined aluminum construction adds strength and more body height adjust-ability Six holes per postINCLUDES: Two Front Body PostsRequires:Some vehicles may require Traxxas #1914R (sold separately) check that your body posts unscrew.SPECS:...

FEATURES: CNC machined aluminum construction adds strength and more body height adjust-ability Six holes per postINCLUDES: Two Front Body PostsRequires:Some vehicles may require Traxxas #1914R (sold separately) check that your body posts unscrew.SPECS:...

FEATURES: CNC machined aluminum construction adds strength and more body height adjust-ability Six holes per postINCLUDES: Two Front Body PostsRequires:Some vehicles may require Traxxas #1914R (sold separately) check that your body posts unscrew.SPECS:...

Wheelie bar mount/ 3x40 BCS (1)/ 3x30 BCS (1)/ 3x12 BCS (1) (for LED light kit installation)Replacement wheelie bar mount for Stampede®, Rustler®, and Bandit® LED light kits.Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed...

Replacement black upper chassis

Replacement gray upper chassis

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)Replacement front bumper for Bandit and 2WD Rustler LED light kits.Replacement part for these models:Bandit®Rustler®Accessory part for these models:Bandit®...

LED light harness, rear (requires #2477 wheelie bar mount)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler®Stampede®Accessory part for these models:Bandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed...

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories...

FEATURES: Nylon construction Black in color Fits XL-5 and VXL Versions Maximum Spur Gear (87 Tooth) INCLUDES: One Black Sealed Gear Cover SPECS: Length: 79mm (3.11") Width: 60mm (2.36") Height: 35mm (1.38")  

FEATURES: Nylon construction Green in color Fits XL-5 and VXL Versions Maximum Spur Gear (87 Tooth) INCLUDES: One Green Sealed Gear Cover SPECS: Length: 79mm (3.11") Width: 60mm (2.36") Height: 35mm (1.38")  

FEATURES: Nylon construction Blue in color Fits XL-5 and VXL Versions Maximum Spur Gear (87 Tooth) INCLUDES: One Blue Sealed Gear Cover SPECS: Length: 79mm (3.11") Width: 60mm (2.36") Height: 35mm (1.38")  

This is the optional RPM Gear Cover for the Traxxas Electric Powered Rustler, Stampede, and Bandit.     FEATURES Expanded gear cover area to compensate for the longer motor shaft of...

.

This is the Motor Protector from RPM for use on theTraxxas Bandit, E-Rustler, E-Stampede, and Traxxas Slash.FEATURESNylon constructionBlue in colorINCLUDESOne Motor ProtectorTwo 3x9.5mm Button Head ScrewsTwo RPM DecalsREQUIREMENTSInstallation on the...

Quick Notes: - fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Product Description Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands...

Quick Notes: - fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Product Description Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands...

This is the optional RPM Wide Front Bumper for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.     FEATURES Adds extra 1/2" (13mm) protection to front end Nylon blend construction,...

FEATURES: One Piece Molded Nylon Black in Color INCLUDES: Four Heavy Duty Camber Links  SPECS: Length: 3.55" (for the (2) longer links) Width: .320" (for the (2) longer links) Lenght: 3.062" (for the (2) shorter links) Width: .320" (for the (2)...

FEATURES: One Piece Molded Nylon Green in Color INCLUDES: Four Heavy Duty Camber Links  SPECS: Length: 3.55" (for the (2) longer links) Width: .320" (for the (2) longer links) Lenght: 3.062" (for the (2) shorter links) Width: .320" (for the (2)...

FEATURES Designed for the electric Rustler and Stampede that include stock molded camber links Nylon blend construction, red in color INCLUDES Two Front and two Rear Links

Description RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so you won’t ever have to replace another one...

Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)

Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)

Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)

Camber links, rear (molded composite) (82mm center to center) (2) (assembled with hollow balls) (for use with #9180 upgrade kit)Replacement part for these models:BIGFOOT® No. 1 Officially Licensed ReplicaRustler® BrushlessRustler®Stampede®...

Camber links, front (molded composite) (69mm center to center) (2) (assembled with hollow balls) (for use with #9180 or 9181 upgrade kit)Replacement part for these models:BIGFOOT® No. 1 Officially Licensed ReplicaRustler® BrushlessRustler®Stampede®...

Toe links (molded composite) (78mm center to center) (2) (assembled with hollow balls) (for use with #9180 or 9181 upgrade kit)Replacement part for these models:Rustler® BrushlessRustler®

Gear set (for 2070, 2075 servos)Replacement part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLE-Revo VXL BrushlessFord F-150 RaptorFord GT®Ford Mustang GTRustler 4X4 VXLRustler VXLSlash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Y-harness, BEC to LED light setReplacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler® 4X4Rustler®Slash 4X4SlashStampede® 4X4Stampede®Accessory part for these models:Rustler® 4X4Bandit® VXLBandit®BIGFOOT® No. 1...

Seal kit, expander box (includes o-ring, seals, and silicone grease) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Bandit VXL E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo VXL Brushless Ford F-150...

Suspension pin set, extreme heavy duty, complete (front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 9182 upgrade kit)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaFord®...

Gear, 10-T pinion (32-p) (steel)/ set screw

Hold down, battery (for use with 30mm height and shorter battery packs)

FEATURES Aluminum construction, red in color   INCLUDES Two ST Racing Upper Shock Tower Mounts

FEATURES Aluminum construction, silver in color   INCLUDES Two ST Racing Upper Shock Tower Mounts

Description This kit is an easy and inexpensive option for bolting camber links (not included) and tie rods (not included) to your electric Rustler XL-5 or electric Stampede 2wd XL-5 when installing RPM Wide Front A-arm kits (RPM #70662, #70664 or...