Traxxas

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum anodized fire red in...

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum Anodized black in...

FEATURES: Black steel and natural aluminum construction INCLUDES: One Primary Shaft, one One-Way Bearing, one Snap Ring, & one spacer REQUIRES: Insta

.

Tires & wheels, assembled, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)

Pair of Kumho off-road tires come pre-glued and mounted with foam inserts to satin-chrome SCT wheels with beadlock-style trim. Fits 12 mm hex, 2WD front only.Accessory part for these models:Ford®...

.

FEATURES: Nylon 2.2" dish wheels          White in color          Re

.

FEATURES: Anodized aluminum construction, blue in color Black nylon ball ends INCLUDES: Two 39mm front camber links Two 49mm back camber links Links are assembled with rod ends and hollow balls One...

Turnbuckles, aluminum (green-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Turnbuckles, aluminum (pink-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

This is the Aluminum Turnbuckle set for the Traxxas Dakar Slash, Ford Raptor, Nitro Slash, Rustler, Rustler VXL, Slash, Slash OBA, Slash VXL, Stampede and Stampede VXL.FEATURESAnodized aluminum...

FEATURES: Factory assembled for front installation on the Jato (1.4mm piston), for rear use, the installed pistons must be replaced with included 1.3mm rear pistons INCLUDES: Two GTR Composite...

These are the Front and Rear Body Mounts for the Traxxas X-Maxx Monster Truck

his is the 7.2V NiMH 1800mAh Stick Battery Pack from Traxxas.FEATURES: Stick configuration          1

This high quality five-cell receiver battery pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1-2 hours of run time. Heavy-duty wiring provides...

This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1 hour of run time. Heavy-duty wiring provides efficient current...

FEATURES: Rubber Anaconda 2.2" tires Split X-Pattern tread Foam inserts Tracer 2.2" chrome wheels INCLUDES: Two rear tires for the Bandit REQUIRES: Mount

Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" wheels. FEATURES: Rubber Anaconda...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

FEATURES: Rear tires 2.2" Satin Chrome Wheels Off-Road Racing Tires 5 spoke design INCLUDES: Two 2.2" mounted Off-Road Racing Tires, Satin Chrome Wheels Foam Inserts

FEATURES: 7075-T6 aluminum constructed tubes Red and black in color Fits front or rear

FEATURES: Steel construction Two different thickness for different surfaces and steering action Silver colored sway bars are thin for rough surfaces with low traction and to reduce understeer Black...

FEATURES: Three bottles of oil (10K,30K,50K weights).INCLUDES: Three 2oz (59ml) bottles of oil        &nbs

his is the Heat Sink for the Velineon 1600XL Brushless Motor used on the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES

  PACKAGE INCLUDES: Two UNASSEMBLED long front shocks with pre-load spacers Two medium springs One 1/2 ounce bottle shock oil  COMMENTS: Instructions are not included for assembling these shocks,...

  FEATURES: Replaces damaged or worn shocks. Molded black plastic bodies. Change the dampening rate (firmness) of each shock with different widths of pre-load spacers. INCLUDES: Two Traxxas Black...

FEATURES: Nylon construction, gray in color Replaces worn or damaged chassis INCLUDES: One long wheelbase chassis REQUIRES: Installation on the E-Maxx

.

FEATURES: Blue anodized. Machined 6061 T-6 aluminum construction. Packaged in foam, on a bubble sealed header card.

The Maxx wheelie bar has 4 snap-in adjustment positions that allow you to choose how extreme you want your action to be. The unique patent-pending design allows it to be easily removed in situations...

EATURES: Cast aluminum construction INCLUDES: One manifold REQUIRES: Nothing. This is a direct replacement part.

Use the TRX 3.3/2.5 recoil pull starter for racing applications where weight savings are critical. It’s all new and engineered for long-lasting, trouble-free operation. It includes a heavy-duty...

FEATURES: Blue anodized header Cooling fins on mounting flange INCLUDES: One header Two allen mounting screws One O-ring for sealing the header SPECS: Le

FEATURES: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange INCLUDES: One Exhaust Header

FEATURES: Plastic construction, exo-carbon finish wingINCLUDES: One rear wing with decalsREQUIRES: Installation on the Revo 3.3SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm)COMMENTS: Also available...

The accessory Revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric. The wheelie bar assembly is easy to install for controlled...

FEATURES: Constructed of aluminum, silver in color INCLUDES: One Exhaust Header for the Traxxas Jato REQUIRES: Attaching to engine and rubber coupler

 

.

.

FEATURES: Flexible exocarbon construction INCLUDES: Wing Four Plastic Mount Sections SPECS: Width: 11" (275mm) Height: 0.55" (14mm)

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Chassis Brace

FEATURES: Constructed of 6061-T6 aluminum, anodized blue in color INCLUDES: Four 17mm Splined Wheel Hubs Four Screw Pins

FEATURES: Nylon construction Gray in color INCLUDES: One Chassis REQUIRES: Installation of car components

Record your Slash 4X4 adventures and share them online with the Traxxas R/C Hero On Board Video Camera! Mounting the camera (not included) is easy using this high-strength fiberglass bracket. It...

This is for the Front & Rear Linkage Sway Bar Sets for the Slash 4x4 and Stampede 4x4 from Traxxas.

FEATURES: Hard anodized aluminum          Replaces stock plastic pivot ball capsINCLUDES: Eight Pivot

 

 

Aluminum differential carrier for X-Maxx. Compatible with Torque-Biasing Center Drive™ and front and rear differentials. Requires #7783X spider gear shaft.

Includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware) (grill sold separately.

Output gears (2), spider gears (4), spider gear shaft (2))

.

4x12mm BCS stainless (4)/ 3x18mm BCS (stainless) (2)/ NL 3.0 (2)

Charger, AC, 500 mAh (7 cell, NiMH) (US only)Accessory part for these models:Ford Fiesta® ST RallySlash 4X4

.

.

Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias ribbed 2.2" tires) (2) (Bandit front, soft compound w/ foam inserts)

Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" wheels. Available in mirror chrome...

​

.

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

.

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

FEATURES: Fan-cooled          21 turns          14 volt          Bullet connectors

FEATURES: Leads and bullet connectors preinstalled          Stock replacement brushed reverse rotation motor INCLUDES: Reverse Rotation Titan 55

Fits Continued: 1/10 Slash R.G.D. / Ford Raptor / Nitro Jato 3.3 / Revo / T-Maxx FEATURES: Tires constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls Aluminum...

Fits Continued: 1/10 Slash R.G.D. / Ford Raptor / Nitro Jato 3.3 / Revo / T-Maxx FEATURES: Machined blue aluminum ball bearing equipped wheels Rubber Tires

FEATURES: Steel construction, silver in color True vented design with machined face Lightweight design Dissapates more heat for better braking INCLUDES: One Brake Disc

FEATURES: Plastic construction          ClearINCLUDES: One Clear 1/16 E-Revo Body

FEATURES: Aluminum construction          Anodized red in colorINCLUDES: Four Aluminum Push Rods

FEATURES: Trimmed and ready to paintINCLUDES: Clear Body for the Traxxas Summit VXLREQUIRES: Polycarbonate safe spray or brush-on pain

FEATURES: Canyon AT tires with angular lugs          Geode chrome with yellow beadlock style wheels in plastic

LED lights, power supply (regulated, 3V, 0.5-amp), TRX-4/ 3-in-1 wire harness

Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-anodized) (4)/ screw pin (4)Lightweight hex wheel hubs fit with greater precision and look awesome on the axles. Machined from solid 6061-T6...

Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)Accessory part for these models

Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ screw pin (4)Accessory part for these models:<

Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pin (4)Accessory part for these models:

Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires) (front) (2)

Product description Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires) (extra wide, rear) (2)

LED tail light kit (fits #8311 body)

FEATURES: Hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES: Two hardened steel yokes with...

.

FEATURES: Direct drop-in for the Revo 3.3, Revo 2.5Rs require slight chassis modification, older Revos require the latest gearbox housing- for proper installation For use with Revos already equipped...

  This is the optional Low CG Conversion Chassis for the 1/10 scale 2WD Traxxas Slash.  

  

 

.

The Traxxas 2.8" Talon tires are the most versatile all-terrain tires available for your Traxxas model. The directional long-wear tread pattern provides extended tire life, while providing...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are available separately or mounted and pre-glued on...