Traxxas

Fits Continued: 1/10 Ford Raptor / Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Plastic construction Black in color Metal Pivot Balls

FEATURES: Nylon Construction Black and White in Color INCLUDES: One Nylon FWD Output Gear One Nylon REV Output Gear One White Nylon Drive Dog Carrier REQ

FEATURES: Black nylon construction. Steel hollow balls. INCLUDES: Twelve rod end/balls SPECS: Length: 1-1/8" (28mm) Width: 3/8" (9mm)

FEATURES: Mounts to throttle servo and controls throttle and brake operation INCLUDES: Servo horn, two rod guides, brake spring, brake adjustment dial, two rods and throttle return spring

.

FEATURES: Assembled turnbuckles with captured rod ends Steel construction with composite plastic rod ends INCLUDES: Two 72mm turnbuckles with rod en

FEATURES: Nylon construction           Black in color INCLUDES: Three Spur Gears

FEATURES: Black chrome wheels INCLUDES: Two All-Star 2.8" rear black chrome wheels REQUIRES: Installation on the vehicle

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design is available with a brilliant mirror-chrome or black-chrome face...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design is available with a brilliant mirror-chrome or black-chrome face...

FEATURES: Fits front of the 2 wheel drive 1/10 scale Traxxas Slash Black colored wheel with satin chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke Front Wheels in Black

Display your Traxxas boat when it is not on the water with this Boat Stand from Traxxas. FEATURES Black plastic construction Four...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 59mm (78mm center to center) turnbuckles REQUIRES: Insta

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 61mm (96mm center to center) turnbuckles REQUIRES: Insta

.

FEATURES: Plastic construction Black in color INCLUDES: One Roll Hoop (Roll Bar) One Transmission Skid REQUIRES: Assembly to vehicle

FEATURES: Metal and Nylon Construction Black and Silver in Color Assembled w/Rod Ends INCLUDES: Two 61mm Front Tie Rods Four Rod Ends Four Hollow Balls R

FEATURES: Constructed of steel TiN coated for strength INCLUDES: Two TiN Coated GTR Shock Shafts

This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck

.

FEATURES: Black plastic construction INCLUDES: One right electronics box One box cover/charge jack plug Three pieces of adhesive backed foam padding REQU

Gearbox housing/ motor plate

(for use with remote push button)

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 55mm (75mm center to center) turnbuckles with instruction sheet

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Aluminum construction Gunmetal colored INCLUDES: One Big Bore Long Shock Body

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Aluminum construction Gunmetal colored

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash  / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE INCLUDES: 2-Bearings

FEATURES Connects both batteries in series to the electronic speed control 16AWG size wire Traxxas High Current connectors with gold plated terminals ...

The Traxxas parallel and series connectors are for use with (#2925X) 7.2V NiMH battery packs only.

This is an optional Traxxas Aluminum Heat Sink, and is intended for use with Traxxas 1/16 VXL vehicles equipped with a Velineon 380 brushless motor FEATURES: Aluminum construction

FEATURES: Made from black molded nylon For the Traxxas Stampede and Rustler. SPECS: Length: 3 1/4" Thickness: 3/8" Width at end near chassis: 1 1/2" Width at end near wheels: 7/8"

Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits.

FEATURES: Gray plastic construction Steel idler shaft INCLUDES: One gearbox One idler shaft COMMENTS: This part fit the standard and XL version of both the

FEATURES: Helps to control shifting of gears when the two speed conversion kit is installed INCLUDES: Shift Fork and Shaft REQUIRES: Installing over the Car

PACKAGE INCLUDES: 2- Bearings SPECS: 5x10x4mm FEATURES: The bearings are constructed of stainless stee

FEATURES: Stainless Steel Construction Silver in Color INCLUDES: Two Bearings REQUIRES: Installation

FEATURES: Supports center of chassis Gray in color, constructed of hardened plastic INCLUDES: Two Lower Chassis Braces for the T-Maxx 3.3

FEATURES: Black nylon construction INCLUDES: Two heavy-duty short half-shafts (external-splined) Two heavy-duty short half-shafts (internal-splined)

FEATURES: Durable nylon construction Steel u-joints INCLUDES: Two long external splined half shafts

FEATURES: Features heavy duty nylon yokes for long lasting durability. The steel axle extends from the nylon yoke. Black in color.

FEATURES: Clear plastic 500cc capacity bottle Blue anodized aluminum spout INCLUDES: One Fuel Bottle One fuel bottle spout with black plastic cap REQUIRE

These are the 5106 15 x 24 x 5mm Ball Bearings for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction with blue...

These are the 5106A 15 x 24 x 5mm Ball Bearings for the Traxxas X-Maxx Monster Truck

FEATURES: Stainless Steel Construction Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

FEATURES: Needle/Roller Bearing design Steel construction INCLUDES: Two Needle Roller Bearings REQUIRES: Nothing

.

FEATURES: Steel construction INCLUDES: Two steel constant velocity driveshafts Two M4/15 screw pins REQUIRES: Installation onto vehicle.

FEATURES: Steel construction, black in color Required when upgrading to the adjustable wheelbase arms - #5341 (not included)INCLUDES: Two Drive Cups Two 4x15mm Screw Pins (2mm hex size)REQUIRES:...

.

.

.

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks for the Traxxas Revo.

FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece design INCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part...

FEATURES: Aluminum construction INCLUDES: One slipper pressure plate One slipper hub REQUIRES: Installation onto vehicle.

FEATURES: Gray plastic construction "Long Travel" raised lettering on top of the rocker arms INCLUDES: (8) rocker arms, Part #5356 REQUIRES: Installation on

FEATURES: Plastic construction Gray in color Progressive 1, Low Rate INCLUDES: One Left/Front Upper Rocker Arm One Left/Front Lower Rocker Arm One Right/Front Upper Rocker Arm One Right/Front Lower...

FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set REQUIRES: Pushrod

INCLUDES: Throttle & brake linkage linkage rods, springs, thumb nut, & various other hardware REQUIRES: Installing on the vehicle

FEATURES: Preassembled sensor assembly INCLUDES: One Optidrive Sensor Two 2.5x6mm caphead machine screws REQUIRES: Nothing. This is a direct replacement

FEATURES: Aluminum Construction Polished Silver in Color Threaded for Easy Adjustment INCLUDES: One Silver Polished Threaded Aluminum GTR Shock Body REQUIRE

FEATURES: Constructed of steel, 1/16" (3mm) in diameter Holds suspension arms in place INCLUDES: Four 1.1" (27mm) pins Four 2.04" (52mm) pins Two 1.4" (35mm) pins

FEATURES: Metal construction Black in color INCLUDES: One Left Front Wheel Spindle One Right Front Wheel Spindle REQUIRES: Assembly onto Vehicle

FEATURES: Direct replacement parts Rubber sealed boots Fully assembled INCLUDES: Two assembled half shafts REQUIRES: Installation on Jato <

FEATURES: Pot Metal Construction Silver in Color INCLUDES: One Slipper Press Plate One Slipper Press Plate Hub REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: Three Crossbraces Twelve 3x6mm Buttonhead Cap Screws Instruction sheet REQUIRES: Installation on th

FEATURES: Black plastic with mounting hardware INCLUDES: Front bumper Front bumper mount REQUIRES: Installation on truck

FEATURES: Plastic construction Black in color INCLUDES: Two Short Half Shaft Sets, internal splined half shafts and external half shafts with glued boot

FEATURES: Plastic construction Black in color INCLUDES: Two Long Half Shaft Sets, internal splined half shafts and external half shafts with glued boot R

 

FEATURES: Skidplate is constructed of high impact molded black plastic Front of skidplate kicks up at about 40 degrees to shield the differential from crash damage or hard landings from...

Fits Continued: 1/10 Nitro Slash Traxxas Hub Retainer 17mm M4x.07 (4) (use with #5853X, #6856X, #6469)

FEATURES: Steel construction, progressive rate damping For Slash Big Bore shocks INCLUDES: Two Rear White Springs REQUIRES: Installation on the vehicle

FEATURES: Steel construction, progressive rate damping For Slash Big Bore shocks INCLUDES: Two Front White Springs REQUIRES: Installation on the vehicle

FEATURES: Nylon construction White in color INCLUDES: Forward and Reverse Primary Gears

.

.

.

.

FEATURES: Molded plastic construction Holds rear suspension arm hinge pins in place INCLUDES: Rear Bulkhead for the Traxxas XO-1

FEATURES: Hardened steel construction 6mm diameter at axle pin area INCLUDES: Two 6mm Rear Stub Axles

FEATURES: Hardened steel construction 6mm diameter at axle pin area INCLUDES: Two 6mm Front Stub Axles

FEATURES: For use with Traxxas glow powered vehicles Equipped with a magnet that enables an RPM sensor to read RPM data INCLUDES: Traxxas 35mm

.

.

.

FEATURES: Polished steel construction Externally splined INCLUDES: One Constant Velocity Half Shaft

FEATURES: Black plastic and steel construction INCLUDES: 2 external splined half shafts 2 internal splined half shafts 4 metal u-joints REQUIRES: Installati

FEATURES: Plastic and steel construction INCLUDES: 2 Stub axles REQUIRES: Installation on vehicle

FEATURES: Steel construction Black and silver for soft and hard INCLUDES: 2 front sway bars 2 rear sway bars REQUIRES: Installation on vehicle

FEATURES: Steel construction          Silver in colorINCLUDES: Twenty Two Hollow Balls

FEATURES: Nylon construction          Black in colorINCLUDES: One Upper Right Suspension Arm

FEATURES: Nylon construction          Black in colorINCLUDES: One Lower Right Suspension Arm

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Bumper

FEATURES: Nylon construction          Black in color          Fits l

FEATURES: Aluminum construction          Finned for cooling         

FEATURES: Nylon construction          Black in colorINCLUDES: One Upper Right Suspension Arm

FEATURES: Nylon construction          Black in colorINCLUDES: One Lower Right Suspension Arm

FEATURES: Nylon construction          Black in colorINCLUDES: One Lower Right Suspension Arm