Traxxas

This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of changes, and preventing overheating. The Temperature...

This is an optional Traxxas "short" RPM Sensor. To collect critical RPM data (Revolutions Per Minute), a "trigger magnet" is installed in the spur gear of electric models, or the flywheel of nitro...

This is an optional Traxxas "Short" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of changes, and preventing overheating. The Temperature...

This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critical to monitoring performance, gauging the effects of...

.

FEATURES: Composite nylon construction Replaces a worn or damaged bellcrank set May also be installed on the Traxxas Rustler, Bandit and 2WD Slash models (assembled in different configurations...

FEATURES: Nylon construction          Black in colorINCLUDES: Upper and Lower Steering Arm          Steering Link

FEATURES: Steel constructionINCLUDES: One Diff Ring Gear          One Pinion Gear

FEATURES: Plastic constructionINCLUDES: One Inner Shaft assembly          One M2x8 Screw Pin

FEATURES: Metal constructionINCLUDES: Driveshaft assembly

FEATURES: Plastic construction, black in color INCLUDES: Upper and lower Case Halves with Wire Cover Gasket Two Foam Pads Two 3x12mm Button Head Cap Screws Two 3x6mm Button Head Cap Screws Two 2...

Included: 1 x LaTrax Rally Clear Body

FEATURES: Polished spokes with blue finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS:

FEATURES: Polished spokes with black chrome finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS:

FEATURES: Polished spokes with blue chrome finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS:

FEATURES: Polished spokes with red chrome finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS:

Drive cup (1)/ 3x8mm CS (use only with #7750X driveshaft) X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

This is the Center Driveshaft Assembly for the Traxxas X-Maxx Monster Truck

Wheel nuts, splined, 17mm, serrated (black-anodized) (4)Accessory part for these models:X-Maxx

Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone greaseAccessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Equipped with Traxx™TRX-4®...

Body, GTS Shock, Aluminum Anodized (1) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tact

Body, GTS Shock, Aluminum Anodized (1) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tact

Body, GTS Shock, Aluminum Anodized (1) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tact

Transmission gears, single speed, metal

Description: Traxxas Chassis - TRA8322 This item package consists of the following Traxxas items. Chassis   For FORD GT

Description: Traxxas Sealed Receiver Box - TRA8324 This item package consists of the following Traxxas items. Box, receiver (sealed) (steering servo mount)/ receiver cover/ access plug/ foam...

Description: Traxxas Stub Axles (2) - TRA8354 This item package consists of the following Traxxas items. Stub axles (front or rear) (2)   For FORD GT

.

.

.

.

.

Includes Main Housing, Front housing, & Cover

.

This is the USB Charger for the LaTrax Alias Quad-Copter Includes: 1 x High Output USB

Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS (2)

Requires #8216 ExoCage Fits #8011 Body

Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))

FEATURES: Certified for use with the Traxxas XO-1 on road car Withstands centrifugal forces at speeds in excess of 100mph Cyanoacrylate (CA) type glue Sealing pin designed into cap prevents...

FEATURES: Plastic construction, white in color INCLUDES: Two Dish Front Wheels in White REQUIRES: Tires Tire Glue

FEATURES: Talon tread          Gray foam insertsINCLUDES: Two Talon Tires with Foam Inserts

FEATURES: Canyon AT tires with angular lugsINCLUDES: Two Tires and Foam InsertsREQUIRES: Mounting to wheels

FEATURES: Nylon construction Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit.

FEATURES: Sturdy plastic construction, metal fuel nipple pre-installed and spring loaded cap for fast fill-ups. INCLUDES: 1 assembled fuel tank.

FEATURES: Aluminum Construction Gun-Metal gray in color INCLUDES: One Engine Mount Two Adjusting plates Eight 3x10mm Hex Head screws, with flat washers and lock washers. Three 3x20mm Flat Head...

.

.

FEATURES: Black plastic construction "TRX" logo on front body mount INCLUDES: Front and rear body mounts Part #5314 Front and rear body post Part #5314 (4) 2.5X18mm screw pins (1) 4X10mm button head...

FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set Eight red Aluminum Spacers REQUIRES: Steel Pushrod -or- the Optional Alumi

FEATURES: Blue anodized 7075 T-6 aluminum construction. INCLUDES: Two spindles (left and right). SPECS: Length: 1-1/4" (32mm) Diameter: 1/4" (6mm)

FEATURES: Fully assembled and ready to install, left or right application INCLUDES: One Driveshaft Assembly with 3x12.5mm screw pin REQUIRES: Installing

.

FEATURES: Molded plastic construction INCLUDES: Left and Right Tunnel Extensions

FEATURES: Constructed of 6061-T extruded aluminum, anodized blue in color INCLUDES: Center Driveshaft for the Traxxas XO-1

These are stock replacement bearings. Includes: 8 x 3x6x2mm Bearings

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Spoke Wheels in Red

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Black colored wheel with satin chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke...

FEATURES: Satin chrome with red beadlock style 5-spoke Dual profile INCLUDES: Two Red Beadlock Front Wheels REQUIRES: Installation on the Traxxas Slash Tire

Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2" outer 3.0" inner) (4WD f/r, 2WD rear) (2) Replacement part for these models: Ford F-150 Raptor Ford Raptor Nitro...

FEATURES: Split spoke black plastic wheel with blue beadlock look rims INCLUDES: Two Short Course Split Spoke Wheels SPECS: Outer Diameter: 2.2" (56mm) Inne

Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2" outer 3.0" inner) (2WD front) (2) Replacement part for these models: Ford F

FEATURES: Split spoke black plastic wheel with blue beadlock look rims INCLUDES: Two Short Course Split Spoke Wheels SPECS: Outer Diameter: 2.2" (56mm) Inne

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke Wheels in...

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke Wheels in...

These hardened, ground steel shafts have a super tough titanium nitride coating with a micro-polished finish that reduces stiction for smoother performance and resists scratching for much longer...

Features: White plastic parts Includes: (6) sets of drive shafts (each set consists of an inside shaft wich slides in the outside shaft). Dimensions: 2.5" l

FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm One right suspension arm REQUIRES: screw pins for installing

INCLUDES:   6- internal splined shafts(female universals)  6- external splined shafts(male universals)

FEATURES: Restores proper performance to worn Velineon motorsINCLUDES: Two 4x9x4mm Ball Bearings        &n

FEATURES: Hardened plastic construction Front or rear application INCLUDES: One left suspension arm One right suspension arm REQUIRES: Installation on suspe

FEATURES: Steel shaft, black in color Steel drive gear assembly, silver in color INCLUDES: One Input Shaft with 18 Tooth Top Gear REQUIRES: Installation fol

FEATURES: Aluminum construction, blue in color Designed for a clean install of a single brushless motor system in the E-Maxx 16.8V RTR (requires gear cover number 3997 (not included))INCLUDES: One...

Fits Continued: 1/10 Ford Raptor / Slash R.G.D. / Revo / T-Maxx FEATURES: 4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't needed...

FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between w

FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between wh

FEATURES: Steel construction Can be used to replace a bent or damaged front center driveshaft INCLUDES: One steel constant-velocity driveshaft REQUIRES: Dus

FEATURES: Holds all gears including the 2speed gear set and input shaft Gray in color, constructed of hardened plastic Fits front or rear of vehicle

FEATURES: Steel construction Rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle

These are the 5182A 20 x 27 x 4mm Ball Bearings for the Traxxas X-Maxx Monster Truck

FEATURES: Constructed of foam and pre-oiled to trap dirt Pre-Filter for extra filtration INCLUDES: Three Air FIlter Inserts for the Traxxas 3.3 engine SP

FEATURES: Black plastic construction Accomodates either AA battery holder or RX flat pack INCLUDES: One receiver box with cover One battery box with cover Rubber charge jack plug Foam pad and...

FEATURES: Nylon Construction Black in Color Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier One Right Axle Carrier Four Dust Boot Retainers Two Bearing Spacers

  FEATURES: Plastic Construction, Black Chrome in Color INCLUDES: One Front and one Rear Bumper REQUIRES: Installation

FEATURES: Steel turnbuckle design 5.0mm diameter INCLUDES: Two front or rear toe links REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Black and grey plastic construction INCLUDES: Four throttle servo horns (Airtronics/Sanwa, Hitec, KO Propo/Fut, JR) Eight steering servo horns for the above mentioned radio brands

Fits Continued: 1/10 Slash R.G.D. / Rally VXL / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / T-Maxx Classic FEATURES: Aluminum construction, blue anodized in color

Fits Continued: 1/10 Slash R.G.D. / Rally VXL / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / T-Maxx Classic FEATURES: Aluminum construction, green anodized in color

FEATURES: Constructed of 0.12" (3mm) thick 6061 T-6 aluminum Anodized blue in color INCLUDES: Chassis Brace and 4x16mm hex head screw REQUIRES: Installin

  This is the Center Gear Box (Transmisssion) (Front & Rear halves) for the REVO from Traxxas.  

FEATURES: Nylon Construction Black in Color INCLUDES: Two Wing Supports One Wing Mount Four 4mm x 8mm Cap Head Socket Screws Four 3mm x 12mm Cap Head Socket Screws One Instruction Sheet

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts)

FEATURES: Constructed of steel, threaded on both ends TiN coated for strength INCLUDES: Two TiN coated Shock Shafts for the Revo type GTR Shocks REQUIRES: D

FEATURES: Aluminum Construction, hard anodized coated Threaded for Easy Adjustment INCLUDES: One hard anodized Threaded Aluminum GTR Shock Body REQUIRES: As

FEATURES: Nylon and metal construction Black and silver in color INCLUDES: One Thick Front Sway Bar (black in color) One Thin Front Sway Bar (silver in color) One Thick Rear Sway Bar (black in color)...

FEATURES: Nylon construction, holds receiver and throttle servo Black in color INCLUDES: One Chassis Top Plate. REQUIRES: Assembly onto Vehicle