Traxxas

FEATURES: Anodized aluminum construction, blue in color Black nylon ball ends INCLUDES: One 49mm blue aluminum turnbuckle REQUIRES: Installation onto vehicl

FEATURES: Black nylon construction Adhesive backed foam strips Fits standard battery packs INCLUDES: One set of battery pack hold downs (left and right) Two adhesive foam spacers

FEATURES: Composite nylon construction, black in color Install one way and you can secure battery packs up to 21mm in height flip it over and install for battery packs up to 28mm in height Two sets...

FEATURES: Plastic servo horn construction Steering rods come with rod ends installed INCLUDES: 2 steering servo horns 1 3x12mm threaded rod steering link with rod ends and hollow balls

FEATURES: White plastic construction INCLUDES: One 21T 1st speed gear One 18T input gear REQUIRES: Installation into Traxxas E-Maxx

FEATURES: White plastic construction INCLUDES: One 26T 1st speed gear One 13T input gear REQUIRES: Installation into Traxxas E-Maxx

FEATURES: Steel construction, gun metal in color Replaces a worn or damaged idler gear INCLUDES: One 13 Tooth Idler Gear (first speed gear) REQUIRES: Instal

FEATURES: Blue anodized aluminum construction. Nylon inserts. INCLUDES: Four 5mm locknuts. SPECS: Thickness: 4.95mm (.195")

.

.

FEATURES: Replaces worn bearings Constructed of steel INCLUDES: Two 6x12x4mm Ball Bearings for the Traxxas T-Maxx Monster Truck REQUIRES: Installing two bea

FEATURES: Features strengthened plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color. <

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks f

These pivot balls are installed through the upper and lower suspension arms and axle carriers and allow camber adjustment of the wheels. FEATURES: Replace stock pivot balls with these hardened

FEATURES: Replaces stock plastic bumpers. Constructed of molded silver colored plastic. INCLUDES: One dual-tube front bumper One dual-tube rear bumper REQUI

FEATURES: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color INCLUDES: Skidplate and stainless steel plate REQUIRES

FEATURES: Replaces damaged rear skidplates. Constructed of black plastic. INCLUDES: One rear skidplate. REQUIRES: Bolting to bottom of chassis using three 3

FEATURES: Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in colorINCLUDES: Skidplate and stainless steel plateREQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Durable steel construction INCLUDES: Eight pins REQUIRES: Assembly onto T/E-Maxx

FEATURES: Attaches to and protects chassis and transmission Skidplate is gray in color Nylon construction INCLUDES: One Skidplate REQUIRES: Installing on

FEATURES: Fits first generation T-Maxx transmission without Optidrive Steel shaft with plastic gear 22T and 17T gears

FEATURES: Stainless Construction Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle

.

FEATURES: Black plastic construction INCLUDES: One front shock mount One rear shock mount Four chassis wire clips Four 3x32mm caphead machine screws Four 3x6mm buttonhead machine screws

FEATURES: Steel idler gear construction Plastic idler gear support construction Idler gear support is black in color Idler gear bearing preinstalled INCLUDES: One idler gear Part #5377 One idler gear...

FEATURES: Plastic shift fork construction Metal shift fork shaft Shift fork plastic is black in color Preassembled INCLUDES: One shift fork and shaft, Part #5389

FEATURES: Constructed of hardened steel INCLUDES: Differential Output Gear for the Traxxas Revo 3.3 REQUIRES: Installing in front or rear of center diffe

FEATURES: 1.4 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks

FEATURES: 1.6 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks

FEATURES: Spring Steel Construction Red Outer Nylon Coating Yellow 2.6 tension rating INCLUDES: Two Red 2.6 Springs for the Traxxas GTR Shocks used on the Revo

FEATURES: Red in color White band on spring indicates 2.9 tension rating INCLUDES: Two 2.9 rear shock springs REQUIRES: Nothing. These are direct fit spring

FEATURES: Red in color Orange band on spring indicates 3.2 tension rating INCLUDES: Two 3.2 rear shock springs REQUIRES: Nothing. These are direct fit sprin

FEATURES: Red in color Green band on spring indicates 3.5 tension rating INCLUDES: Two 3.5 rear shock springs REQUIRES: Nothing. These are direct fit spring

FEATURES: Red in color (small gold square indicates spring type) Metal construction INCLUDES: 2 springs SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/1

FEATURES: Red in color Tan band on spring indicates 4.1 tension rating INCLUDES: Two 4.1 rear shock springs REQUIRES: Nothing. These are direct fit springs.

FEATURES: Steel construction Painted red w/small black stripe 4.4 tension rate (slightly lighter than stock rear spring) INCLUDES: Two 4.4 Black Rate Shock Springs for the Traxxas Revo

FEATURES: Steel construction Painted red w/small silver stripe 4.9 tension rate (Light) INCLUDES: Two Shock Springs REQUIRES: Assembly to vehicle

FEATURES: Red in color (small pink square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo

FEATURES: Red in color (small blue square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo

FEATURES: Red in color (small purple square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo <

FEATURES: Polished aluminum construction INCLUDES: Two Shock Shafts REQUIRES: Installin in shock set 

FEATURES: Nylon construction Black in color INCLUDES: One Left and Right 30° Caster Blocks One Left and Right 30° Steering Blocks REQUIRES: Assem

FEATURES: Nylon construction Black in color INCLUDES: One Left and Right 25° Caster Blocks One Left and Right 25° Steering Blocks REQUIRES: Assem

FEATURES: Nylon construction Gray in color INCLUDES: One Left and Right Steering Bellcrank One Servo Saver One Servo Saver Spring Two Steering Supports Four 4mm x 7mm x 2.5mm Plastic Bushings

FEATURES: Nylon construction Black in color INCLUDES: One Servo Arm for Airtronics, KO, and Sanwa One Servo Arm for JR One Servo Arm for Hitec Three Servo Case Mounts

FEATURES: Metal and nylon construction Black in color INCLUDES: Two Metal Rear Stub Axles w/Nylon Yokes installed REQUIRES: Assembly onto Vehicle<

FEATURES: Metal Construction Black in color INCLUDES: One Input Shaft (Slipper Shaft) One Slipper Shaft Spacer REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: Front and Rear Body Mount Posts REQUIRES: Installation on the vehicle

FEATURES: Steel construction, red in color 4.9 damping rate with double yellow stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUI

FEATURES: Steel construction, red in color 5.4 damping rate with double orange stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUI

FEATURES: Plastic construction, black in color INCLUDES: Center half shafts (three internal splined and two external splined) REQUIRES: Installation on the

FEATURES: Nylon construction Black in color INCLUDES: One Heavy Duty Differential Carrier One Front and Rear Linkage Arm One Differential Fork Two X-Ring Gaskets One Ring Gear Gasket Two Bushings One...

FEATURES: JST Connectors INCLUDES: One Center Harness One Wire Clip Three Zip Ties REQUIRES: Installation on vehicle

Note: In order to be compatible, the Traxxas Summit must be the version with a TQ 2.4GHz radio system. 

.

.

FEATURES: Black nylon construction INCLUDES: One Battery Hold Down One Retainer Hold Down One Battery Post One Foam Spacer One Angled Body Clip REQUIRES: In

FEATURES: Black nylon constructionINCLUDES: One Battery Hold Down          One Retainer Hold Down

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic construction, black in color

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic construction

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic construction

FEATURES: 1.8 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks

FEATURES: 2.0 lb/in tension Red coating INCLUDES: Two GTR Red Shock Springs for the Traxxas Slayer REQUIRES: Assembly onto the Traxxas Slayer Shocks<

FEATURES: 2.3 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks

.

Includes: - Main Frame (2) - Battery Holder (1) - Canopy Mounting

.

.

FEATURES: Molded plastic construction INCLUDES: Splitter Extension with two 3x10mm Countersunk Screws

FEATURES: Dense foam absorbs minor impacts INCLUDES: Foam Front Bumper for the Traxxas XO-1 SPECS: Width: 10.1" (258mm) Thickness: 0.98" (25mm)

.

FEATURES: Composite construction Holds stock 7-cell battery supplied with vehicle INCLUDES: Two battery Hold Down sections with metal Post and Body Clip REQ

FEATURES: Composite construction Allows installation of taller multi-cell batteries INCLUDES: Battery Hold Down with metal Post and Body Clip REQUIRES: Fast

FEATURES: Hardened steel construction INCLUDES: Internal Splined Half Shaft

FEATURES: Hardened plastic construction Black in color INCLUDES: One rear bulkhead

This is the Front Bulkhead for the Traxxas Slash 4x4.

FEATURES: Hardened plastic construction Black in color INCLUDES: One front shock tower REQUIRES: Installation on chassis

Fits Continued: 1/10 Nitro Slash FEATURES: Aluminum construction INCLUDES: 2 rear stub axles 2 pins

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Body Mount          One Rear Body Mount

FEATURES: Nylon construction          Red in colorINCLUDES: Four Pushrods

FEATURES: Aluminum construction          Blue in colorINCLUDES: One Front Bulkhead Tie Bar          One Rear Bulkhead Tie Bar

FEATURES: Nylon construction, black in colorINCLUDES: Two Rear Bulkhead Sections          Four 3 x 10mm Button Head Screws        &nb

FEATURES: Nylon construction          Black in colorINCLUDES: Two front bulkhead halves          Four 3x10mm Button Head Screws<

FEATURES: Nylon constructionBlack in colorINCLUDES: Left Front & Rear Axle Carrier

FEATURES: Nylon construction          Red in colorINCLUDES: Two Front and two Rear Toe Links

FEATURES: Nylon construction          Black in color          Fits l

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Center Half Shaft

FEATURES: Molded composite construction          Red in colorINCLUDES: Four Pushrods

FEATURES: Molded composite construction          Green in colorINCLUDES: Four Pushrods

FEATURES: Nylon construction, black in colorINCLUDES: One Wing          One Decal SetREQUIRES: Installation on the vehicle

FEATURES: Nylon construction          White in colorINCLUDES: One Wing          Decal Sheet

FEATURES: Nylon construction          Red in colorINCLUDES: Four Front/Rear Toe Links

FEATURES: Molded composite plastic construction, green in colorINCLUDES: Two Front and two Rear Toe Links       

FEATURES: Nylon construction          Black in colorINCLUDES: Two Internal Splined Half Shafts

FEATURES: Plastic constructionINCLUDES: One-piece Rear and two-piece Front Body Mounts

FEATURES: Made of black plastic INCLUDES: One bulkhead SPECS: Length: 3" (76mm) Width: 2-13/16" (71mm) Height: 2" (51mm)

FEATURES: Made of black plastic. INCLUDES: One skid plate SPECS: Length: 3-11/16" (68mm) Width: 5-3/4" (146mm) Height: 1-1/8" (29mm)

.

.

.