Traxxas

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Threadlocking compound pre-applied. Hardened steel construction. Designed for use with Traxxas R/C kits. Hexagon socket drive insert. INCLUDES: Six 4mm Grubs

FEATURES: Replaces stock gear shaft. Constructed of steel. INCLUDES: One gear shaft REQUIRES: Diassembly of gearbox and installing shaft between the spur gear and the primary gears.

This is a tube of white lithium grease from Traxxas. This is used to lubricate gears and differential components.

.

FEATURES: Spring constructed of steel INCLUDES: One header spring One black rubber gasket One white nylon gasket REQUIRES: Fastening header to engine with spring

FEATURES: Button head machine screws. Starter attachment screws with threadlock. INCLUDES: Six screws. SPECS: Length: 12mm Diameter: 3mm

FEATURES: Black plastic construction INCLUDES: Four steering servo mounts REQUIRES: Nothing. These are direct replacement parts. COMMENTS: Since the Revo uses two steering servos, the vehicle requires four steering servo mounts as found in this package.

FEATURES: Nylon construction Black in color INCLUDES: One Stering Servo Cover Plate REQUIRES: Installation on the vehicle SPECS: Length: 55mm (2.17") Width: 20mm (0.79") Height: 9mm (0.35")

FEATURES: Nylon construction INCLUDES: One 1st speed gear REQUIRES: Assembly to vehicle If the Primary Shaft Set is needed, use 5393. SPECS: Gear Diameter: 45mm (1.7") Gear Thickness: 5.5mm (.22") Teeth Count: 43 teeth COMMENTS: If the Primary Clutch...

FEATURES: Rubber construction Blue in color Flexible material INCLUDES: Two Blue rubber Shock Boots and Two black Plastic Shock Caps. REQUIRES: Nothing SPECS: Length: 1 3-8" (35mm) Diameter: 1/2" (13mm)

FEATURES: Nylon flanged tapered nuts. Blue anodized aluminum countersunk cap head screws. INCLUDES: Two nylon nuts. Two aluminum 8X4mm screws. REQUIRES: Securing wing to body with hardware

FEATURES: Nylon construction Black in color INCLUDES: One Pull Ring One Fuel Tank Cap One Fuel Line Pinch Clip REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One ESC Mounting Plate Two 3x35mm Cap Head Screws Foam Padding REQUIRES: Use with Castle Creations Mamba ESC

.

.

.

.

.

.

FEATURES: Molded plastic construction INCLUDES: Two Battery Hold Down Retainers

FEATURES: Molded plastic construction INCLUDES: Bellcrank Brace and Draglink for the Traxxas XO-1

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 46T Spur Gear for the Traxxas XO-1 On-Road Car

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1 On-Road Car  

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1 On-Road Car

This is a Traxxas Electric Motor Temperature Sensor Mount. NOTE: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with the Traxxas Link App installed. Most Traxxas kits...

  FEATURES: Plastic construction, black in color INCLUDES: Wire Retainer/Gear Cover with two 3x4mm Screws

This is an optional Traxxas Telemetry Trigger Magnet Holder and Spur Gear Magnet. This component installs onto the spur gear and holds a magnet that is detected by the RPM sensor (TRA6520, TRA6522) to provide RPM data. FEATURES: Black plastic and metal...

EATURES: Plastic magnet holderINCLUDES: Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

.

FEATURES: Nylon and rubber constructionINCLUDES: Two Diff Gear Covers          Two Large O rings          Two Small O rings

.

FEATURES: Nylon construction           Black in color INCLUDES: One Spur Gear

This is the optional 50T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES Nylon construction Black in color INCLUDES ...

FEATURES: Nylon construction           Black in color INCLUDES: One  Spur Gear

FEATURES: Nylon construction          Black in colorINCLUDES: Two Yokes          Two 3x10mm Screw Pins

FEATURES: Nylon construction          Black in colorINCLUDES: One Front and One Rear Diff Cover Plate          Two...

FEATURES: Nylon construction          Black in colorINCLUDES: Four Wheel Hubs          Four 1.5x8mm Axle PinsREQUIRES: Installation on the...

FEATURES: Steel constructionINCLUDES: Four Rocker Arm PostsREQUIRES: Installation on the vehicleSPECS:    Length: 18.5mm (0.73")          Diameter: 4mm (0.16")

FEATURES: Plastic constructionINCLUDES: Two Differential Lockers

FEATURES: Made of black plastic. INCLUDES: One cover gear One wire retainer

.

.

.

FEATURES Molded composite plastic construction   INCLUDES Two Hex Wheel Hubs Two Steel Clips   ...

FEATURES Steel construction Snaps onto groove of each stub axle to hold wheel hub and uprights in place   INCLUDES Six Wheel Hex Clips

FEATURES Molded composite plastic construction Fastens to front and rear bulkheads and protects differential assembly from dirt   INCLUDES One...

 

 

Description: Traxxas Spur Gear 70-Tooth - TRA8357 This item package consists of the following Traxxas items. Spur gear, 70-tooth   For FORD GT

Description: Traxxas Brake Calipers (Red) - TRA8367 This item package consists of the following Traxxas items. Brake calipers (red), front (2)/ rear (2)   For FORD GT

Ball bearings, black rubber sealed (5x8x2.5mm) (2)

.

.

.

.

This is the Replacement Battery Door for the 2.4GHz Transmitter for the LaTrax Alias Quad-Copter Includes: 1 x Battery Door

These are replacement LED Lens for the LaTrax Alias Quad-Copter Includes: 4 x LED Lens

These are replacement LED Lens for the LaTrax Alias Quad-Copter Includes: 4 x LED Lens

FEATURES Plastic construction, black in colorInstalls in shock towers and holds front and rear of body in place   INCLUDES Front and Rear Body Mounts for the Teton Monster Truck

FEATURES Plastic constructionNon-adjustable   INCLUDES Four Camber LinksTwo Toe Links

FEATURES Steel construction, black in colorFits front and rear stock or optional shocks   INCLUDES Two Shock Springs   SPECIFICATIONS Length: 1.8" (46mm)Diameter: 0.47" (12mm)

FEATURES Composite plastic constructionStock replacement spur gear   INCLUDES 60T Spur Gear

.

.

This is thrust bearing lube that can be used on all the Traxxas kits as well asmost other kits on the market.  It is to be used on thrust bearings, and not onball diffs or planetary diffs.  It comes in a tube that will lubricate MANY!thrust...

FEATURES: Steel construction          Cap head with hexagon socket drive insert          Metal lock washersINCLUDES: (6)...

FEATURES: Zinc finish Metal construction INCLUDES: (6) 3X28mm cap head screws (6) lock washers (6) washers (6) split washers SPECS: Length: 1-1/8" (28mm) Diameter: 1/8" (3mm)  

FEATURES: Replaces worn brake discs Fiber faced for long life INCLUDES: One Brake Disc REQUIRES: Installing brake adapter (4966), pads (4965) and output yoke (4927) at rear of transmission.

FEATURES: Aluminum Construction Silver in Color INCLUDES: Four Aluminum Wheel Spacers REQUIRES: Assembly onto Vehicle

FEATURES: Plastic constructionCamber links install between stub axle carriers and bulkhead for front and rear wheelsToe links install between caster/steering blocks and steering bellcranks on front wheels INCLUDES: Four Camber Two Toe Links

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes: 4 E-clips 2 C-clips 2 O-rings 8 Washers 2...

FEATURES: Steel construction          Black in colorINCLUDES: Six Countersunk Machine Flat Head ScrewsREQUIRES: Installation on the vehicleSPECS:    Length:...

FEATURES: Steel construction          Black in colorINCLUDES: Six Countersunk Machine ScrewsREQUIRES: Installation on the vehicleSPECS:    Length:...

FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

FEATURES: Steel Shafts INCLUDES: One 20mm Shaft One 25mm Shaft One 44mm shaft REQUIRES: Installation on vehicle

FEATURES: Metal construction Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 18mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

.

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench SPECS:...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required INCLUDES: Six...

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm countersunk screw is required INCLUDES: Six...

Fits Continued: 1/10 Maximum Destruction / Grave Digger 30th / Monster Mutt / Rally VXL / Nitro Jato 3.3 / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on...

FEATURES: Black steel construction Hexagon socket drive insert High round cap head screws INCLUDES: (6) Screws SPECS: Length: 23mm Diameter: 3mm

.

Fits Continued: 1/10 Nitro 4-Tec / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Black steel construction with hex headINCLUDES: Six screws

Fits Continued: 1/10 Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Metal Construction          Black in...

Fits Continued: 1/10 Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler / T-Maxx Classic FEATURES: Steel Construction          Black in...