Traxxas

FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

FEATURES: Hardened plastic construction Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

FEATURES: Steel construction INCLUDES: Two shock shafts COMMENTS: These shafts get installed into the shock bodies.

FEATURES: Blue rubber sealed          May also be used in any vehicle where this size bearing is requiredINCLUDES: Two Ball BearingsREQUIRES: Installation on the vehicleSPECS:    Outer Diameter:...

FEATURES: Ball bearings          Blue rubber sealedINCLUDES: Two Ball BearingsREQUIRES: Installation on the vehicleSPECS:    Outer Diameter: 12mm (0...

FEATURES: Prevents moisture and dirt from entering receiver boxINCLUDES: Silicone O-ring          Silicone grease          Two sections of foam...

FEATURES: Nylon construction          Black in colorINCLUDES: Twenty Hollow BallsREQUIRES: Installation on the vehicleSPECS:    Outer Diameter: 4.5mm (0...

FEATURES: Black nylon constructionINCLUDES: Eight Nylon Rod Ends          Eight Nylon flanged Balls

FEATURES: Aluminum construction          Silver in colorINCLUDES: Two Shock Shafts

FEATURES: Steel construction          Red in color          0.82 rate, double orangeINCLUDES: Two GTR Shock SpringsREQUIRES: Installation on the...

FEATURES: Steel construction          Red in color          Double green          0.88 rateINCLUDES: Two Shock...

FEATURES: Steel construction          Red in color          1.02 rate, double tanINCLUDES: Two GTR Spring ShocksREQUIRES: Installation on the...

FEATURES: Steel construction          Red in color          1.15 rate, double blackINCLUDES: Two Shock SpringsREQUIRES: Installation on the...

FEATURES: Steel construction          Red in color          1.76 rate, orangeINCLUDES: Two Shock SpringsREQUIRES: Installation on the...

FEATURES: Steel construction          Red in color          Green          1.92 rateINCLUDES: Two Shock Springs

FEATURES: Steel construction          Red in color          2.06 rate, tanINCLUDES: Two GTR Shock SpringsREQUIRES: Installation on the shock...

FEATURES: Steel construction          Red in color          2.22 rate, blackINCLUDES: Two GTR Shock SpringsREQUIRES: Installation on the...

.

FEATURES: Spring,shock(GTR) for 1/16 SummitINCLUDES: Two SpringsREQUIRES: Installation onto shocksSPECS:    Spring Rate:  (Pink)          Length:      ...

FEATURES: Steel construction with nickel finish          Pink compression ratingINCLUDES: Two Shock Springs

FEATURES: Spring,shock(GTR) for 1/16 SummitINCLUDES: Two SpringsREQUIRES: Installation onto shocksSPECS:    Spring Rate:  Blue          Length:      ...

FEATURES: Steel construction with nickel finish          Blue compression ratingINCLUDES: Two Shock Springs

FEATURES: GTR shock springs for the 1/16 Summit          Steel constructionINCLUDES: Two SpringsREQUIRES: Installation onto shocksSPECS:    Spring Rate:  3.2...

FEATURES: Composite constructionINCLUDES: Motor Cover, Motor Mount Hinge Post, 3x10mm Screw with split and            Falt Washers, 2.5 x 4mm Screw and two 3x8mm Screws

FEATURES: Made of black plastic, these are mounted to the side of the car to protect agains side impacts. INCLUDES: Two nerf bars SPECS: Length: 5-1/2" Width: 1-7/8" Height: 2-1/4"

.

 

FEATURES: Plastic construction white in color INCLUDES: Two 12-Spoke Wheels

FEATURES Replaces damaged or missing receiver box seal and cushions Silicone grease helps to seal receiver box to chassis   INCLUDES Two Foam...

FEATURES Steel construction Fastens lower rear suspension arms to chassis   INCLUDES Two 4x85mm Suspension Pins   ...

FEATURES Molded composite plastic construction   INCLUDES Servo Horn Steering Linkage with Pressed-In Steel Balls

Rebuild kit for use with #7750X heavy duty X-Maxx driveshaft. Kit includes pins for 2 driveshaft assemblies.

FEATURES Molded composite plastic construction   INCLUDES Differential Carrier Two X-Ring Gaskets Two Ring Gear Gaskets

Description: Traxxas Body mounts, Front & Rear (fits #8311 body) (2) This item package consists of the following Traxxas items. Body mounts, front & rear (fits #8311 body) (2)  

Description: Traxxas Body Bumper, Foam - TRA8319 This item package consists of the following Traxxas items. Body bumper, foam   For FORD GT

Description: Traxxas Caster Blocks This item package consists of the following Traxxas items. Caster blocks (c-hubs) (2)/ kingpin bushings (4)   For FORD GT

Description: Traxxas Mounts, Suspension Arms This item package consists of the following Traxxas items. Mounts, suspension arms (front & rear) (4)/ hinge pin retainers (2)   For FORD GT

Description: Traxxas Steering Blocks (2) This item package consists of the following Traxxas items. Steering block (2)   For FORD GT

Description: Traxxas Camber Link This item package consists of the following Traxxas items. Camber link/toe link set (plastic/ non-adjustable) (front & rear)   For FORD GT

.

.

Description: Traxxas Carriers, Stub Axle (Left & Right) - TRA8352 This item package consists of the following Traxxas items. Carriers, stub axle (left & right)   For FORD GT

Description: Traxxas Drive Cups - TRA8353 This item package consists of the following Traxxas items. Drive cups, inner (2)/ screw pins (2)   For FORD GT

Description: Traxxas Wheel Hubs (4) - TRA8356 This item package consists of the following Traxxas items. Wheel hubs, hex (disc brake rotors) (4)   For FORD GT

Description: Traxxas Housing, Differential (Rear) - TRA8380 This item package consists of the following Traxxas items. Housing, differential (rear)   For FORD GT

Description: Traxxas Housing, Differential (Front) - TRA8381 This item package consists of the following Traxxas items. Housing, differential (front)   For FORD GT

Ball bearings, black rubber sealed (4x10x4mm) (2)

Ball bearings, black rubber sealed (6x12x4mm) (2)

Ball bearings, black rubber sealed (7x14x5mm) (2)

.

.

.

These are replacement Main Frame Lower Portion for the LaTrax Alias Quad-Copter Includes: 1 x Black Main Frame Lower 4 x 1.6x5mm BCS (self-tapping) screws

.

.

.

.

.

FEATURES; Pre-Molded White Plastic Wheels Cone-Dish Design Dyeable White Plastic INCLUDES: 2-Front Wheels SPECS: 2.2" Diameter 3/4" wide REQUIRES: Customer will need to purchase front tires separately, they will need tires with inside diameter of 2.2"

FEATURES: Clear silicone construction INCLUDES: One Silicone Tube SPECS: Length: 203mm (8") Inner diameter: 8mm (0.32") Outer diameter: 14mm (0.55")

FEATURES: Black nylon construction INCLUDES: One L&R Front Bumper Mount Set One L&R Rear Bumper Mount Set Eight 3x15mm round head machine screws REQUIRES: Nothing. This is a direct replacement part.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Plastic Diff Gear INCLUDES: One 60T gear REQUIRES: Traxxas SRT (Stadium Race Truck) SPECS: Thickness: 8mm (0.31") Diameter: 33mm (1.30")  

FEATURES: Sturdy silicone construction INCLUDES: One 2' length of fuel line SPECS: Inside diameter: 3/32" (2.5mm) Outside diameter: 3/16" (5mm) Length: 2' (610mm)  

.

FEATURES: Made from black molded nylon For the Traxxas Rustler/Stampede INCLUDES: Dust cover for the Traxxa Rustler 3 x 6 mm round head coarse thread screws (to mount dust cover) Rubber Plug Specs: 3" (77mm) Compatible with Traxxas Telemetry

FEATURES: Aluminum Construction Blue in Color INCLUDES: Six Button Head Aluminum 4mm x 4mm Screws REQUIRES: Assembly onto Vehicle

FEATURES: Black metal 3x25mm grub screws. Silver metal 3mm locknuts with nylon inserts. INCLUDES: Eight 3x25mm Grub Screws Eight 3mm Locknuts

FEATURES: Steel construction Top Shoulder design (not threaded) Used for attaching the Throttle Bellcrank to Revo chassis INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 12mm (.47") Length, bottom of head to end of screw: 10mm (...

FEATURES: Metal construction Black in color INCLUDES: Six 3mm x 10mm Shoulder Screws REQUIRES: Assembly onto Vehicle

.

FEATURES: Gray plastic construction INCLUDES: Two mounts REQUIRES: Mounting SPECS: Length: 1-1/2" (38mm) Width: 3/8" (9mm) Height: 3/8" (9mm)

FEATURES: Metal bearing construction Blue rubber dirt shields INCLUDES: (2) 5X10mm ball bearings, Part #5115 SPECS: Inside diameter: 3/16" (5mm) Outside diameter: 3/8" (10mm) Width: 5/32" (4mm)

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler / T-Maxx Classic FEATURES:...

FEATURES: Metal Construction Black in Color Hex Head Design INCLUDES: Six 4mm x 15mm Black Metal Screw Pins. REQUIRES: Assembly onto Vehicle 2mm Hex Wrench SPECS: Length (Overall): 15.9mm (0.62") Length (Threads): 6.0mm (0.23") Diameter (Threads): 3.9mm...

FEATURES: Constructed of steel with serrated flange area for sure grip Nylon insert INCLUDES: Eight 5mm Flanged Nylon Locking Nuts REQUIRES: 8mm nut drivers SPECS: Hex Size: 8mm Inner Diameter: 5mm

.

FEATURES: Connects between servo horns and steering arms INCLUDES: Two 3x50mm steel turnbuckles, four short rod ends and four hollow balls REQUIRES: Installing on steering assembly according to instructions in manual  

FEATURES: Black plastic construction Standard and maximum throw steering stops INCLUDES: Steering arm mount Part #5343X Steering stop #5343X  

FEATURES: Black plastic and steel wire construction INCLUDES: One ball link One straight linkage rod One coiled linkage rod One servo horn REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Nylon construction Black in color INCLUDES: One Front Body Mount REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction Silver in color For Adjusting Roll Center INCLUDES: Four Silver Metal Hollow Balls Four 3mm Silver Washers REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Nylon Steering Drag Link Two 3mm Shoulder Screws REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Left Rear Stub Axle Carrier One Right Rear Stub Axle Carrier REQUIRES: Assembly onto Vehicle

FEATURES: Aluminum construction Silver in color INCLUDES: One Metal Brake Cam REQUIRES: Assembly onto Vehicle

FEATURES: Steel construction INCLUDES: One input shaft One pin COMMENTS: This part is for the innovative new Traxxas cush drive output that cushions the gear drive system and protects critical starter gears from damage.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Nylon construction          Black in colorINCLUDES: Two Upper Caps          Four Hollow Balls          Two...

FEATURES:Nylon constructionBlack in colorINCLUDES: Gear Cover, Motor Mount Hinge Post, 3x8mm Cap Head Screw with Flat and Split Washers, 3x8mm Button Head Screw

.

.

.

.

.

Ball bearings, black rubber sealed (5x10x4mm) (2)

Ball bearings, black rubber sealed (5x11x4mm) (2)

.

.