Traxxas

.

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler

.

.

FEATURES: Black steel construction INCLUDES: Two Rocker Arm Posts REQUIRES: Installing on the vehicle

.

  This is the 12T 48P Pinion Gear for the Telluride Off-Road Vehicle from Traxxas  

Fits Continued: 1/10 4-Tec Features: 6 3x8mm socket head screws 6 3mm washers 1 Hex allen wrench

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler Includes: 2- front shock shafts.

FEATURES: Steel construction

FEATURES: Machined aluminum construction INCLUDES: Two Aluminum Rear Stub Axle Carriers Two 3x3mm Set Screws Two 3x12mm Flat Phillips Head Screws Two 3x31.5mm Pins Six 6mm E-Clips

.

PACKAGE INCLUDES: One 30 tooth idler gear

.

.

FEATURES: Steel construction

FEATURES: Steel construction

FEATURES: Steel construction

FEATURES: Steel construction

FEATURES: Steel construction

FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts.

FEATURES: Black plastic camber links Two 2.56" (65mm) Two 3" (76mm) INCLUDES: Four camber links REQUIRES: Traxxas bandit

This is the Camber Link Set in Gray for the 1/10 scale Traxxas Bandit.

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler...

FEATURES: Metal construction Black in color INCLUDES: Six 3 x 40mm button-head hex machine screws REQUIRES: Installation on the vehicle

These are the 4x15mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck

These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction Secures...

.

.

Fits Continued: 1/10 Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Hardened steel construction.      

.

Fits Continued: 1/10 Nitro Stampede / Nitro Rustler Includes: 2- Chrome plated Rear shock shafts.

FEATURES Connects receiver batteries to chargers with molex output connector

.

These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction Secures...

.

PACKAGE INCLUDES: Two steering blocks (one left and one right)

FEATURES: Steel construction Natural color INCLUDES: Two front axles REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Black Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS:

FEATURES: Grey Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS:

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler / T-Maxx Classic FEATURES: Black steel construction Screws are half-threaded/half-smooth Phillips head

Fits Continued: 1/10 Nitro Slash / Nitro Sport / T-Maxx These are Shoulder Screws FEATURES: Black steel construction <

FEATURES: Made of a black plastic/nylon material. Also called the rear hub or hub carrier. Has 2 possible mount locations for the outer hinge pin shaft. INCLUDES. 2 Stub alxe carriers.

FEATURES: Gray plastic construction INCLUDES: Two wheel hubs Two 2.5mmX12mm axle pins SPECS: Hex size: 12mm Width: .32" (8mm)

FEATURES: Steel construction INCLUDES: One steel 30T idler gear REQUIRES: Installation on vehicle

FEATURES: Gray plastic construction INCLUDES: One gray plastic hold-down plate, (2 5/8" long, 3/8" wide and has 2 holes that attach to the posts). Two metal posts (aluminum with a hex shaped top and...

FEATURES: Plastic construction Black in color These steering blocks mount the the front uprights, and support the front axles INCLUDES: One left and right s

FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

FEATURES: Molded Composite Gray in Color INCLUDES: Two ultra shock bodies (long) REQUIRES: Installation

Fits Continued: 1/10 Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Molded Composite Gray in Color INCLUDES: (2) Bodies

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Nylon construction INCLUDES: Two nylo

Fits Continued: 1/10 Nitro 4-Tec / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Constructed of molded plastic. Contains enough parts for two shocks. Fits the shocks on most...

FEATURES: Steel construction _ Roll pin pre-installed INCLUDES: One slipper clutch set SPECS: Length: 1.98" (50mm) Diameter: .21" ( 5mm)

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / T-Maxx Classic FEATURES: Steel...

FEATURES: Metal Construction Silver in Color Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

FEATURES: Steel construction Black in color Button head design INCLUDES: (6) 4X6mm button head screws SPECS: Length: 1/4" (6mm) Diameter: 3/16" (4mm)

This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch bell on the engine into the transmission case. The...

Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications. The out-of-the-box spur gear is a 36-tooth.

This is a replacement 40T Spur Gear for the Traxxas R

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon ConstructionINCLUDES: One Spur GearREQUIRES: the #6814 center differential

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

FEATURES: Black nylon constructionINCLUDES: One 33T output gear Two spacersREQUIRES: Silicone Grease, use #6037SPECS: Outer diameter: 1.37" (35mm) Thickness: 1.02" (26mm)

FEATURES: Replaces worn brake discs INCLUDES: Brake Disc Steel Adapter

FEATURES: Nylon Construction          Black in Color  

.

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

FEATURES: Nylon Construction          Black in Color  

.

FEATURES: Nylon Construction          Black in Color  

FEATURES: Steel construction

FEATURES: Steel construction

FEATURES: Threadlocking compound pre-applied. Hardened steel construction. Designed for use with Traxxas R/C kits. Hexagon socket drive insert. INCLUDES: Six 4mm Grubs

FEATURES: Steel construction, black in color Replaces worn or damaged hexes INCLUDES: Two Wheel Hub Hexes

FEATURES: Replaces stock gear shaft. Constructed of steel. INCLUDES: One gear shaft

FEATURES: Black nylon construction. INCLUDES: Four caster spacers Four caster shims REQUIRES: Nothing. These are direct replacement parts.

This is a tube of white lithium grease from Traxxas. This is used to lubricate gears and differential components.

Tube of white lithium grease

.

.

.

.

FEATURES: Spring constructed of steel INCLUDES: One header spring One black rubber gasket One white nylon gasket REQUIRES: Fastening header to engine wit

FEATURES: Button head machine screws. Starter attachment screws with threadlock. INCLUDES: Six screws. SPECS: Length: 12mm Diameter: 3mm

FEATURES: Black plastic construction INCLUDES: Four steering servo mounts REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Nylon construction Black in color INCLUDES: One Stering Servo Cover Plate REQUIRES: Installation on the vehicle

FEATURES: Plastic construction Simple, squeeze-clamp restricts fuel line for easy engine shut-off Fuel Cap Pull Ring for easier refueling INCLUDES: One Shut-off Clamp(red in color) One Fuel Cap One...

FEATURES: Nylon construction INCLUDES: One 1st speed gear REQUIRES: Assembly to vehicle If the Primary Shaft Set is needed, use 5393.

FEATURES: Rubber construction Blue in color Flexible material INCLUDES: Two Blue rubber Shock Boots and Two black Plastic Shock Caps. REQUIRES: Nothing

FEATURES Nylon construction, black in colorCo

FEATURES: Nylon flanged tapered nuts. Blue anodized aluminum countersunk cap head screws. INCLUDES: Two nylon nuts. Two aluminum 8X4mm screws. REQUIRES:

FEATURES: Nylon construction Black in color INCLUDES: One Pull Ring One Fuel Tank Cap One Fuel Line Pinch Clip REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One ESC Mounting Plate Two 3x35mm Cap Head Screws Foam Padding REQUIRES: Use with Castle Creations Mam