Standard

This is the Hitec D-Series Dynamo D-645MW High Torque Metal Gear Servo. FEATURES Ideal for all R/C catagories 2S LiPo and 6-cell NiMH compatible Narrow deadband width and high standing...

Hitec Super Torque, Metal Gear, that will work with             Futaba J, Hitec S, JR, and Airtronics-Z radio systems.FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS)...

Our new waterproof servos have what it takes to keep your radio control vehicle, airplane or robot watertight! With high torque, dual ball bearings and metal gears, our analog waterproof servos have the industry’s first IP67* rating ranking them...

The ADS-7M V2 Servo is designed to give you fast and precise steering. Resilient to the elements and built from hard-wearing materials. Specification: Case – Red, Water-proof & dust-proof Bearing – Dual ball bearing Connector...

At 10mm thick, the Hitec HS-5125MG servo is a great choice for a super thin wing servo. Featuring a digital programmable circuit providing instant torque and holding power, Hitec’s HS-5125MG also uses our reliable M/P gear and metal gear...

Specifications:Torque(6.0V): 23.0 kg-cm (319.4 oz/in)Torque(7.4V): 25.0 kg-cm (347.2 oz/in)Speed: 0.16 sec (6.0V) │ 0.14 sec (7.4V)Operating Voltage：6.0 ~ 8.4 DC VoltsWeight: 72 g (2.54 oz)Bearing Type：Ball Bearing x 2Motor Type：DC MotorGear Type：Copper...

Torque(4.8V): 18.0 kg-cm (250.0 oz/in) Torque(6.0V): 23.0 kg-cm (319.4 oz/in) Speed: 0.14 sec (4.8V) │ 0.12 sec (6.0V) Operating Voltage：4.8 ~ 6.0 DC Volts Weight: 75 g (2.65 oz) Bearing Type：Ball Bearing x 2 Motor Type：Coreless Motor Gear...

Torque(6.0V): 6.5 kg-cm (90.26 oz/in) Torque(7.4V): 7.5 kg-cm (104.0 oz/in) Speed: 0.09 sec (6.0V) │ 0.08 sec (7.4V) Operating Voltage：6.0 ~ 8.4 DC Volts Weight: 28.5 g (1.01 oz) Bearing Type: Ball Bearing x 2 Motor Type：Coreless Motor Gear...

 Hitec Digital, Super Speed, Metal Gear, Programmable Servo  that will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems.FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS)...

FEATURES: Metal geared          Dual ball bearing output spline          Water and dust tight          Designed for use...

The Savox SV-0220MG PLUS is a budget-friendly, metal-geared, digital standard servo capable of operating on high voltage."Plus" series servos feature Soft Start and Sanwa SSR compatibility.Features:Metal gear train ensures durability and longevity...

In The Box(1) A6190 Standard Digital Servo(4) Pre-installed Mounting Grommets And Eyelets With Hardware(3) Plastic Servo Arms and (1) ScrewFeaturesHigh Voltage (HV) capable (4.8-8.4v input range)Perfectly suited for sport and trainer type model aircraft...

82280 Perfex Servo KS5071-09MW

FEATURES: Three metal gears          Metal/plastic 1st gear          Dual ball bearing          Designed for R/C...

Featuring the industry standard 25-tooth output spline with 3mm hex screw, and metal gears for maximum durability, our new HS-648MG is the 25-tooth version of our powerful high-torque HS-645MG. It’s the perfect choice for those larger sport planes or...

The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque."Plus" series servos feature Soft Start and Sanwa SSR compatibility.Features:Metal gear train...

The SV-0320 PLUS is a budget-friendly, standard digital servo which is capable of running on high voltage than most standard servos."Plus" series servos feature Soft Start and Sanwa SSR compatibility.Features:Capable of HV operation.Industrial plastic...

Spektrum S614 Waterproof Metal Gear Surface Servo, 23T SPMS614 is compatible with AXI03000T1, AXI03000T2, AXI03016T1, AXI03016T2, AXI03019, LOS04011

Spektrum™ S663 Servo FeaturesWaterproof*25 Tooth splinePlastic case designMetal Gear TrainDigital servo with 226 oz/in @ 6.0V and 260 oz/in @ 7.4VServo dimensions: 1.58in x .79in x 1.62inInput Voltage 6.0V-7.4V*Refer to the instruction manual for more...

FeaturesHigh Resolution 32-bit (4096 steps) Programmable Digital CircuitPWM or TTL Protocol CapabilityMagnetic Encoder Position SensorWide Operating Voltage (4.8 - 8.4V)Heavy-Duty, Long Life MotorsIP65 Rated CasesCustomization and Modification Options...

Product Description Key Features 65 oz.-in. torque torque at 6.0V-perfect for most 1./10 2WD vehicles Long lead for use in bigger chassis such as some short course trucks—servo can be installed without a servo extension .16 sec/ 60 degrees...

Product SpecificationsGear Type MetalSpline Count 23 Teeth

.

The Savox SC-0352 PLUS is considered a 'standard' servo, but outperforms other standard servos with more torque and dual bearing support."Plus" models feature Soft Start and Sanwa SSR CompatibilityFeatures:Dual ball bearing support for precision and gear...

FEATURES: Three metal gears.          Dual ball bearings.          Metal 1st Gear.          Four adjustable splined...

FEATURES: Designed to be powered from a 2-cell 7.4V LiPo battery for extra            speed and power          Ideal for 1/10 to 1/8 scale on- and...

This is the Hitec HS-70MG Ultra Torque Feather Servo.FEATURESIdeal for fast park flying models, micro airplanes, MAVs and1/18 scale R/C carsMetal gears with one ball bearingINCLUDESHS-70MG Ultra Torque Feather Servo, 1.02" (26mm) 4-Point Horn,1.4" (35mm)...

FEATURES: Ball bearing          Karbonite gears INCLUDES: One servo          Black round servo horn          Black long...

Description: Servo with specific software tune to make it as best as possible for crawlers! Fully waterproof means you can take it anywhere and not worry about it! *Photos for reference only. Feature: For: Crawler / Buggy Material:...

  Features:   Strict production and quality control of plastic components Totally Green – from materials to production, these servos are environmentally friendly. Idea for 1/10 throttle servo and park flier airplanes...

This is the Hitec D-Series Dynamo D-645MW High Torque Metal Gear Servo. FEATURES Ideal for all R/C catagories 2S LiPo and 6-cell NiMH compatible Narrow deadband width and high standing...

75BBS Retract Servo used for R/C Aircraft Mechanical Retracts      with a Universal Futaba J, Hitec S, JR and Airtronics Z connector.FEATURES: High torque          Travels 180° -...

Torque(4.8V): 16.5 kg-cm (229.1 oz/in) Torque(6.0V): 20.0 kg-cm (277.7 oz/in) Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V) Operating Voltage：4.8 ~ 6.6 DC Volts Weight: 60 g (2.12 oz) Bearing Type：Ball Bearing x 2 Motor Type：DC Motor Gear Type：Copper...

ApplicationSurfaceBearingDualBushing Or BearingBearingConnector TypeUniversalConnector Wire Length5.5" (140 mm)Gear MaterialBrassGear TypeMetalInput Voltage6.0VMaximum Servo Torque138.9 oz-in (10.0kg-cm) at 6VMotor TypeBrushedOverload ProtectionNoProduct...

Full aluminum case low profile servo for 1/10 applications! Featuring near 10kg's worth of Torque at 7.4v, and a speed of under a tenth of a second will make this servo fit for drift and on-road racing! Full aluminum case ensures all the heat gets...

S-U301– Standard Digital and S.Bus2 Capable Airplane Servo with Accessory Pack (01102322-1)SPEED:0.18 sec/60°at 6.6V0.16 sec/60° at 7.4VTORQUE:3.5 kgf/cm at 6.6V48.6 ozf/in at 6.6V3.9 kgf/cm at 7.4V54.2 ozf/in at 7.4VSIZE:40 mm x 20 mm x 36.1 mm1.59 in x...

Feature:For: Trucks, Cars, Crawlers & BoatsMaterial:  Aluminum / PlasticColor: BlackSpecification:Spline: 25TTorque(5.0V): 25 kg-cm (347 oz./in)Torque(6.0V): 28 kg-cm (388 oz./in)Torque(7.4V): 35 kg-cm (486 oz./in)Speed: 0.23 sec @5.0VSpeed: 0...

LW-30MGTorque(4.8V): 18.0 kg-cm (250.0 oz/in)Torque(6.0V): 23.5 kg-cm (326.4 oz/in)Torque(7.2V): 30.0 kg-cm (416.6 oz/in)Speed: 0.18 sec (4.8V) │ 0.16 sec (6.0V)│ 0.14 sec (7.2V)Operating Voltage：4.8 ~ 7.2 DC VoltsWeight: 62 g (2.19 oz)Bearing Type：Ball...

Description: Servo with specific software tune to make it as best as possible for crawlers! Fully waterproof means you can take it anywhere and not worry about it! *Photos for reference only. Feature: For: Crawler / Buggy Material:...

Low profile aileron servo designed to fit in the wing itself.  This allows the use of two aileron servos for more precision. Comes with a         Universal Futaba J, Hitec S, JR and Airtronics Z Connector...

Torque(4.8V): 10.5 kg-cm (145.8 oz/in) Torque(6.0V): 13.0 kg-cm (180.5 oz/in)Speed: 0.15 sec (4.8V) │ 0.12 sec (6.6V)Operating Voltage：4.8 ~ 6.6 DC VoltsWeight: 60 g (2.12 oz)Bearing Type：Ball Bearing x 2Motor Type：DC MotorGear Type：Copper &...

.

Hitech HSR-1425CR continuous rotation robot servo. This servo has a universal type connector.Specifications: Voltage: 4.8 - 6.0V Speed: 43.4 RPM +10% Torque: 38.88 oz-in (2.8 kg-cm) Weight: 0.33oz (41.7g) Size: 1.59 x 0.77 x 1.44" (40.6 x 19.8 x 36.6mm)

The Spektrum A6390 standard size analog sport servo is the perfect budget solution that offers a lightweight plastic gear train, a budget class leading torque rating of 66 oz/in and quick transit speed of 0.14/60. Single ball bearing output shaft and a...

Specifications:Torque @ 4.8v - 10.0kg/138.8oz-inTorque @ 6v - 12.0kg/166.7oz-inSpeed @ 4.8v - 0.26 sec/60 degSpeed @ 6v - 0.23 sec/60 degDimensions L x W x H (mm): 40.7 x 20 x 45.2Weight: 52.0g

Torque(4.8V): 9.0 kg-cm (125.0 oz/in)Torque(6.0V): 12.5 kg-cm (173.6 oz/in)Torque(7.2V): 15.0 kg-cm (208.3 oz/in)Speed: 0.15 sec (4.8V) │ 0.13 sec (6.0V)│ 0.11 sec (7.2V)Operating Voltage：4.8 ~ 7.2 DC VoltsWeight: 62 g (2.19 oz)Bearing Type：Ball Bearing...

LF-20MG 270° Torque(4.8V): 16.5 kg-cm (229.1 oz/in) Torque(6.0V): 20.0 kg-cm (277.7 oz/in) Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V) Operating Voltage：4.8 ~ 6.6 DC Volts Weight: 60 g (2.12 oz) Bearing Type：Ball Bearing x 2 Motor Type：DC...

LF-20MG Torque(4.8V): 16.5 kg-cm (229.1 oz/in) Torque(6.0V): 20.0 kg-cm (277.7 oz/in) Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V) Operating Voltage：4.8 ~ 6.6 DC Volts Weight: 60 g (2.12 oz) Bearing Type：Ball Bearing x 2 Motor Type：DC Motor Gear...

LF-20MG Torque(4.8V): 16.5 kg-cm (229.1 oz/in) Torque(6.0V): 20.0 kg-cm (277.7 oz/in) Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V) Operating Voltage：4.8 ~ 6.6 DC Volts Weight: 60 g (2.12 oz) Bearing Type：Ball Bearing x 2 Motor Type：DC Motor Gear...

Torque(4.8V): 10.5 kg-cm (145.8 oz/in) Torque(6.0V): 13.0 kg-cm (180.5 oz/in) Speed: 0.15 sec (4.8V) │ 0.12 sec (6.6V) Operating Voltage：4.8 ~ 6.6 DC Volts Weight: 60 g (2.12 oz) Bearing Type：Ball Bearing x 2 Motor Type：DC Motor Gear Type：Copper...

FEATURES: Ideal for 1/10 scale vehicle steering and throttle applications, .20-            .60 class aircraft, boats and all EP and GP .30-.50 class...

PRODUCT SPECIFICATIONSTorque: 2.1kg/cmSpeed:(sec/60deg): 0.13secLength: 1.41 in (35.9mm)Width: 0.59 in (15.1mm)Height: 1.13 in (28.6mm)Weight: 0.9 oz (26.6g)Connector Type: Universal with 23.6 in (600mm) LeadGear Type: MetalVoltage: 6V

Torque(4.8V): 15.5 kg-cm (215.3 oz/in)Torque(6.0V): 17.0 kg-cm (236.1 oz/in)Speed: 0.16 sec (4.8V) │ 0.14 sec (6.0V)Operating Voltage：4.8 ~ 6.0 DC VoltsWeight: 63.0 g (2.22 oz)Bearing Type：Ball Bearing x 2Motor Type：DC MotorGear Type：CopperOperating...

Specifications:Torque @ 4.8v - 6.0kg / 83.3oz-inTorque @ 6v - 8.0kg / 111.1oz-inSpeed @ 4.8v - 0.19 sec / 60 degSpeed @ 6v - 0.15 sec / 60 degDimensions L x W x H (mm): 40.7 x 20 x 45.2Weight: 52.0g

FEATURES: Dual Ball Bearings.          Indirect Drive.          Plastic Gears. INCLUDES: One HS-425BBS Servo         ...

FEATURES: For .20-.60 size airplanes, all electric and glow powered 30 class            helicopters, and steering and throttle in cars, trucks and...

Torque(4.8V)：16.0 kg-cm / ( 222.2 oz/in)Torque(6.0V)：18.0 kg-cm / ( 250.0 oz/in)Speed：0.14 sec (4.8V)│0.12 sec (6.0V)Operating Voltage：4.8 ~ 6.0 DC VoltsWeight： 56.0g (1.98 oz)Bearing Type：Ball Bearing x 2Motor Type：DC MotorGear Type：Copper &...

Torque(4.8V): 6.0 kg-cm (83.3 oz/in)Torque(6.0V): 7.0 kg-cm (97.2 oz/in)Speed: 0.16 sec (4.8V) │ 0.14 sec (6.0V)Operating Voltage：4.8 ~ 6.0 DC VoltsWeight: 56.0 g (1.98 oz)Bearing Type：Ball Bearing x 2Motor Type：DC MotorGear Type：CopperOperating...

Torque(4.8V): 8.6 kg-cm (119.4 oz/in)Torque(6.0V): 9.8 kg-cm (136.1 oz/in)Speed: 0.16 sec (4.8V) │ 0.14 sec (6.0V)Operating Voltage：4.8 ~ 6.0 DC VoltsWeight: 56.0 g (1.98 oz)Bearing Type：Ball Bearing x 2Motor Type：DC MotorGear Type：CopperOperating...

FEATURES: NEW Heavy-duty resin gear train          Nylon bushing          3-pole Ferrite motor INCLUDES: One Deluxe Standard servo with nylon bushing...

FEATURES: Higher Torque than other Standard Servos.          Dual Oilite Bearings          Good for Cars or Airplanes INCLUDES: One HS-422S Servo w/Universal...

S-U300– Standard Digital and S.Bus2 Capable Airplane Servo with Accessory Pack (01102320-1)SPEED:0.23 sec/60°at 4.8V0.19 sec/60° at 6.0VTORQUE:44.4 oz/in at 4.8V56.9 oz/in at 6.0VSIZE:1.6 in x 0.8 in x 1.4 inWEIGHT:1.26ozPlastic Gearing6mm/25T...

Specifications:Torque @ 4.8v - 4.2kg-cm / 58.3oz-inTorque @ 6v - 6.5kg-cm / 90.3oz-inSpeed @ 4.8v - 0.14 sec / 60 degSpeed @ 6v - 0.11 sec / 60 degDimensions L x W x H (mm): 40.7 x 20 x 45.2Weight: 42.0g

FEATURES: Heavy-duty resin gear train          Nylon bushing          3-pole ferrite motor INCLUDES: One Deluxe Standard servo with nylon bushing...